Scanning Electron Microscopy Observations of Failures of Implant Overdenture Bars: A Case Series Report

Background: Soldered or cast bars are used as a standard of care in attachment systems supporting maxillary and mandibular implant overdentures. When failures of these bars occur, currently there is a lack of evidence in relation to their specific etiology, location, or nature. Purpose: To investigate the failure process of a case series of six failed soldered bars, four intact soldered bars, and one intact cast milled bar, which had been supporting implant overdentures. Materials and Methods: A total of 11 different overdenture bars were removed from patients with different configuration of opposing arches. A failed bar (FB) group (n = 6) had failed soldered overdenture bars, which were recovered from patients following up to 2 years of wear before requiring prosthodontic maintenance and repair. An intact bar (IB) group (n = 5) had both soldered bars and a single cast milled bar, which had been worn by patients for 2 to 5 years prior to receiving other aspects of prosthodontic maintenance. All bars were examined using scanning electron microscopy to establish the possible mode of failure (FB) or to identify evidence of potential failure in the future (IB). Results: Evidence of a progressive failure mode of corrosion fatigue and creep were observed on all the FB and IB usually around the solder areas and nonoxidizing gold cylinder. Fatigue and creep were also observed in all the IB. Where the level of corrosion was substantial, there was no evidence of wear from the matrices of the attachment system. Evidence of an instantaneous failure mode, ductile and brittle overload, was observed on the fracture surfaces of all the FB, within the solder and the nonoxidizing gold cylinders, at the solder/cylinder interface. Conclusion: Corrosion, followed by corrosion fatigue, appears to be a key factor in the onset of the failure process for overdenture bars in this case series of both maxillary and mandibular overdentures. Limited sample size and lack of standardization identify trends only but prevent broad interpretation of the findings.     

One-Year Prospective Evaluation of the Early Loading of Unsplinted Conical Brånemark Fixtures with Mandibular Overdentures Immediately following Surgery

Background: Prospective evaluation of the early loading of unsplinted Branemark implants with mandibular over‐dentures opposing conventional dentures is not evident in the implant‐related literature. Purpose: To clinically evaluate progressive and early loading of 20 unsplinted conical Brånemark implants in edentulous mandibles with overdentures. Materials and Methods: Ten edentulous patients all had two conical Brånemark implants placed in the anterior mandible with mandatory primary stability with bicortical anchorage. Ball abutment connection was performed simultaneously. Previously constructed conventional mandibular dentures were temporarily relined with tissue conditioner postoperatively and worn with moderation for the first 2 weeks to allow progressive loading. Early loading of the implants followed after 2 weeks, with inclusion of the respective matrices in the mandibular dentures, using a definitive reline procedure. Results: All patients successfully functioned with their mandibular implant overdentures from 2 to 52 weeks postoperatively. Mean marginal bone loss was within established criteria for success:0.22 mm (SD = 0.48 mm) mesially and 0.30 mm (SD = 0.39 mm) distally on the conical implants. Mobility tests using the Periotest instrument became more negative, although not at statistically significant levels. Difficulties in the management of the peri‐implant mucosa between surgery and loading at 2 weeks were observed in 40% of the patients. Conclusions: These preliminary 1‐year results show that successful early loading of unsplinted conical Brånemark implants with mandibular overdentures is possible.     

The outcome of arthroscopic treatment of temporomandibular joint arthropathy

Ninety patients underwent arthroscopic temporomandibular joint surgery to 124 joints for arthropathy which had failed to respond to at least six months of non-surgical treatment. They were surveyed at between 6 months and 5 years (mean 2.5 years) after surgery and 63 per cent responded to the survey. They reported an 82 per cent improvement for pain (50 to 100 per cent better), 80 per cent for clicking and 82 per cent for locking. There was no morbidity following the treatment. Arthroscopic surgery should be considered for advanced temporomandibular joint arthropathy which is refractory to non-surgical treatment.     

Effects of disinfecting irreversible hydrocolloid impressions on the resultant gypsum casts: Part II—Dimensional changes

This study evaluated the effect of disinfection time (10, 30, and 60 minutes) on the dimensional changes of stone casts poured against an irreversible hydrocolloid impression material (Jeltrate). Impressions were made of a stainless steel analog of a maxillary arch. The impressions were sprayed with bleach, iodophor, phenol, and water and were stored for designated times before poured in a type IV stone (Vel-mix). The arch width, length, and depth of the vault of the resultant casts were measured by use of a contact measuring device (MicroVal) capable of measuring to 0.001 mm. Data were analyzed with two-way analysis of variance at the 95% confidence level. Results indicated that disinfection treatment of alginate impressions with surface disinfectants did not cause significant dimensional changes in the resultant stone casts from statistical and clinical points of view.     

Immediate Implant Placement and Provisionalization Following Tumor‐Resective Surgery in the Midfacial Region: A Case Series

Surgical and prosthodontic restoration of the midfacial region following tumor resection has always posed a considerable challenge, as this area serves crucial functional and esthetic roles. Being diagnosed and subsequently treated for facial tumors can have an immense psychosocial impact on a patient, as the resulting defects are often disfiguring, and lead to an inability to masticate, swallow, and speak clearly. Provision of an immediate facial and dental prosthesis at the time of surgery can limit these side effects and help reduce mental duress on these patients and their families, as well as aid in the process of rehabilitation. Rapid prototyping (RP) and 3D printing, as this paper shows, assists presurgical planning of the tumor resection, as well as the manufacture of maxillofacial and dental prostheses. Often these defects are extensive, so prosthesis retention is aided by zygomatic implants placed at the time of surgical resection. When placed at this time, and prior to radiation therapy, these craniofacial implants have improved survival rates. Thus, this treatment modality can improve postoperative recovery considerably, while at the same time allowing for cleaning and monitoring of the resected site for tumor recurrence.