Application of intermaxillary fixation screws in maxillofacial trauma.

PURPOSE: The use of intermaxillary fixation (IMF) in the treatment of maxillofacial trauma represents the cornerstone of fracture reduction and immobilization. Many modalities of IMF have been described; recently IMF screws have been introduced into clinical practice, however, hardware failure can occur. We performed a retrospective study evaluating hardware-associated complications for self-drilling/tapping IMF screws. MATERIALS AND METHODS: A retrospective study on 49 patients requiring IMF was performed. The diagnosis, duration of IMF, screw site, use of elastic or wire fixation, and associated complications were recorded. IMF screws were used to adjunct open reduction techniques, for definitive closed reduction, or fracture prevention following dentoalveolar surgery. Follow-up examinations were performed until fracture healing was complete (6 to 8 weeks). RESULTS: A single adverse event occurred in 19 patients (39%) while 4 patients (8%) had more than 1 complication. The most common event was screw loosening; 29% of patients had at least 1 screw dislodged in the treatment period. Of the total number of screws placed (229), 15 (6.5%) became loose, and were equally distributed among the mandible and maxilla. The remaining complications noted were root fracture, 4% (2 of 49); loosened wires, 6% (3 of 49); screw shear, 2% (1 of 49); malocclusion, 2% (1 of 49); and ingested hardware, 2% (1 of 49). CONCLUSIONS: Overall the IMF self-drilling/tapping screws have been shown to be a useful modality to establish maxillomandibular fixation. It is a safe, and time-sparing technique; however, it is not without limitations or potential consequences which the surgeon must be aware of in order to provide safe and effective treatment.     

Conical Primary Cementless Stem in Revision Hip Arthroplasty: 94 Consecutive Implantations at a Mean Follow-Up of 12.7 years

BackgroundRevision of a failed total hip arthroplasty (THA) poses technical challenges. The use of primary stems for revision can be advantageous for maintaining bone stock and reducing complications: small case series have reported promising results in the short-term to mid-term follow-up. The aim of this study was to evaluate the long-term clinical and functional results and survivorship of a consecutive series of THA femoral component revisions using a conical primary cementless stem (PCS).MethodsNinety-four stem revisions with a preoperative Paprosky I or II defect were analyzed at an average follow-up of 12.7 ± 5.4 years. Aseptic loosening was the reason for revision in 92.5% of cases. Twenty patients were lost to follow-up. Two subgroups were created: Group 1 (n = 59) underwent isolated stem revision; Group 2 (n = 15) underwent complete THA revision. All were evaluated preoperatively and postoperatively based on the Harris Hip Score (HHS), the Western Ontario and McMaster Universities Index (WOMAC) score, and the visual analog scale for pain (VAS). Residual trochanteric pain and length discrepancies were recorded. Radiographic evaluation included signs of osteolysis, subsidence, loosening, and heterotopic ossification.ResultsPCS survivorship was 100% at 5 years and 95.9% at 10 years. Overall, significant postoperative improvements (P < .01) were observed on the HHS (44.3 vs 86.9), WOMAC (42.8 vs 82.8), and VAS (7.0 vs 3.0). Postoperative scores on all scales were higher for Group 1 (P < .01). Three patients (4.1%) underwent further stem revision. Demarcation lines (1 mm) were found in 12 (16.2%) patients and significant heterotopic ossifications in 22 (29.7%).ConclusionThe use of PCS for stem revision in failed THA with a limited femoral bone defect is a reliable option for both isolated stem revision and concomitant cup revision in well-selected patients.     

Dietary Carbohydrate as Glycemic Load,Not Fat,Coupled with Genetic Permissiveness Favoring Rapid Growth and Extra Calories,Dictate Metabolic Syndrome and Diabetes Induction in Nile Rats (Arvicanthis niloticus)

Objective: Whether dietary carbohydrate (CHO) or fat is more involved in type 2 diabetes (T2DM) induction uncomplicated by dietary fiber was addressed in a spontaneous diabetic model, the diurnal Nile rat that mimics the human condition. Methods: A total of 138 male Nile rats were fed plant-based and animal-based saturated fat where 10% energy as CHO and fat were exchanged across 5 diets keeping protein constant, from 70:10:20 to 20:60:20 as CHO:fat:protein %energy. Diabetes induction was analyzed by: 1. diet composition, i.e., CHO:fat ratio, to study the impact of diet; 2. quintiles of average caloric intake per day to study the impact of calories; 3. quintiles of diabetes severity to study the epigenetic impact on diabetes resistance. Results: High glycemic load (GLoad) was most problematic if coupled with high caloric consumption. Diabetes severity highlighted rapid growth and caloric intake as likely epigenetic factors distorting glucose metabolism. The largest weanling rats ate more, grew faster, and developed more diabetes when the dietary GLoad exceeded their gene-based metabolic capacity for glucose disposal. Diabetes risk increased for susceptible rats when energy intake exceeded 26 kcal/day and the GLoad was >175/2000 kcal of diet and when the diet provided >57% energy as CHO. Most resistant rats ate <25 kcal/day independent of the CHO:fat diet ratio or the GLoad adjusted to body size. Conclusion: Beyond the CHO:fat ratio and GLoad, neither the type of fat nor the dietary polyunsaturated/saturated fatty acid (P/S) ratio had a significant impact, suggesting genetic permissiveness affecting caloric and glucose intake and glucose disposition were key to modulating Nile rat diabetes. Fat became protective by limiting GLoad when it contributed >40% energy and displaced CHO to <50% energy, thereby decreasing the number of diabetic rats and diabetes severity.     

Effect of imaging geometry on evaluating natural white-spot lesions using quantitative light-induced fluorescence

The objective of this study was to determine the effect of imaging geometry on evaluating natural white-spot lesions with quantitative light-induced fluorescence (QLF). A total of 34 specimens were prepared from extracted human premolars and permanent molars with white spots on the interproximal surface. The specimens were each adjusted to a final thickness of 3.0 mm. Images were acquired with the QLF system perpendicular to the white spots and at 5 degrees intervals up to 30 degrees above and below the perpendicular. The specimens were rotated around the buccolingual axis of the tooth (pitch angle) and around the long axis of the tooth (roll angle). The averages of fluorescence loss (DeltaF, %) and lesion size (mm2) were determined with QLF. Another variable, DeltaQ, which was defined as the fluorescence loss integrated over the lesion size (% x mm2), was also calculated. DeltaF was smaller when lesions were viewed from the cervical direction (angles less than 90 degrees ), and became bigger when viewed from the coronal direction. Roll angle did not significantly affect DeltaF. Apparent lesion size diminished with deviations from 90 degrees in both directions for pitch and roll angles. DeltaQ was affected by pitch and roll angles with the largest value at 90 degrees and values decreasing in both directions from 90 degrees. In general, there were significant differences for angles larger than 20 degrees from the perpendicular for all three QLF variables. This study suggests that angle is an important factor to control when performing QLF studies; however, small changes (deviations within 20 degrees ) have a minimal effect on QLF variables.     

Clinical applications and outcomes of using indicators of risk in caries management.

The aim of this review was to systematically assess clinical evidence in the literature to determine the predictive validity of currently available multivariate caries risk-assessment strategies (including environmental, sociodemographic, behavioral, microbiological, dietary/nutritional, and/or salivary risk factors) in: 1) primary teeth; 2) coronal surfaces of permanent teeth; and 3) root surfaces of permanent teeth. We identified 1,249 articles in the search, and selected 169 for full review. Inclusion and exclusion criteria were established prior to commencement of the literature search. Papers that conformed to these criteria were included (n = 15 for primary teeth; n = 22 for permanent teeth; and n = 6 for root surfaces), and 126 papers were excluded. Included articles were grouped by study design as: longitudinal, retrospective, and cross-sectional. The predictive validity of the models reviewed depended strongly on the caries prevalence and characteristics of the population for which they were designed. In many instances, the use of a single predictor gave equally good results as the use of a combination of predictors. Previous caries experience was an important predictor for all tooth types.     

Oral food clearance and the pH of plaque and saliva

Carbohydrate clearance, plaque pH, and saliva pH resulting from eating foods containing high levels of sugar or starch were measured in the same experimental runs on the same test subjects. Foods with a higher content of sugar were removed more rapidly and depressed the pH of the plaque for a shorter time than did starchy foods containing less sugar. This finding suggests that retention of food in the mouth may be as important an indicator of its cariogenic potential as is the level of the pH it produces in plaque.     

A prospective study of treatment techniques to minimize the volume of pelvic small bowel with reduction of acute and late effects associated with pelvic irradiation

The volume, distribution, and mobility of opacified pelvic small bowel (PSB) were determined by fluoroscopy and orthogonal radiographs in 150 consecutive patients undergoing pelvic irradiation. Various techniques including uteropexy, omental transposition, bladder distention, inclining the patient, and anterior abdominal wall compression in the supine and prone treatment position were studied for their effect on the volume and location of small bowel within the pelvis. Abdominal wall compression in the prone position combined with bladder distention was selected for further investigation because of its simplicity, reproducibility, patient comfort, and ability to displace the small bowel. Factors correlating with the volume of pelvic small bowel (PSB) included prior pelvic surgery, pelvic irradiation (XRT), and body mass index. After pelvic surgery, especially following abdominoperineal resection (APR), there was a greater volume of PSB which was also less mobile. The severity of acute gastrointestinal effects positively correlated with the volume of irradiated small bowel. Overall, 67% of patients experienced little or no diarrhea, 30% developed mild diarrhea, and no patient required treatment interruption. Late gastrointestinal effects correlated with the prior pelvic surgery and with the volume of small bowel receiving greater than 45 Gy. Small bowel obstruction was not observed in 75 patients who had no previous pelvic surgery. However, following pelvic surgery excluding APR, 2/50 patients and following APR, 3/25 patients developed small bowel obstruction.     

Summary Workshop Report: Facilitating Oral Product Development and Reducing Regulatory Burden Through Novel Approaches to Assess Bioavailability/Bioequivalence

This summary workshop report highlights presentations and over-arching themes from an October 2011 workshop. Discussions focused on best practices in the application of biopharmaceutics in oral drug product development and evolving bioequivalence approaches. Best practices leverage biopharmaceutic data and other drug, formulation, and patient/disease data to identify drug development challenges in yielding a successfully performing product. Quality by design and product developability paradigms were discussed. Development tools include early development strategies to identify critical absorption factors and oral absorption modeling. An ongoing theme was the desire to comprehensively and systematically assess risk of product failure via the quality target product profile and root cause and risk analysis. However, a parallel need is reduced timelines and fewer resources. Several presentations discussed applying Biopharmaceutics Classification System (BCS) and in vitro-in vivo correlations in development and in post-development and discussed both resource savings and best scientific practices. The workshop also focused on evolving bioequivalence approaches, with emphasis on highly variable products (HVDP), as well as specialized modified-release products. In USA, two bioequivalence approaches for HVDP are the reference-scaled average bioequivalence approach and the two-stage group-sequential design. An adaptive sequential design approach is also acceptable in Canada. In European Union, two approaches for HVDP are a two-stage design and an approach to widen C (max) acceptance limits. For some specialized modified-release products, FDA now requests partial area under the curve. Rationale and limitations of such metrics were discussed (e.g., zolpidem and methylphenidate). A common theme was the benefit of the scientific and regulatory community developing, validating, and harmonizing newer bioequivalence methodologies (e.g., BCS-based waivers and HVDP trial designs).