Optimization of the defibrillation current density in the heart region by a two-layer segmented electrode

Transthoracic defibrillation is a procedure applying high intensity electrical current through the thorax region by electrodes, in order to simultaneously activate most of the myocardial cells, thus enforcing them to reinstate a normal rhythm. A solution is proposed for analysis and synthesis of the current density distribution field J in the heart region. In an attempt to reach uniform excitation of the greatest possible quantity of myocardial cells, a field image is searched for, with the J-vector uniformity distribution as a criterion. The finite element method and the method of approximating functions are used, as well as nonlinear programming. This approach resulted in designing a two-layer defibrillation electrode, with the layer applied to the thorax divided in three different resistivity regions.     

Evaluation of GAFCHROMIC EBT film for Cyberknife dosimetry

External beam therapy (EBT) GAFCHROMIC film is evaluated for dosimetry and characterization of the CyberKnife radiation beams. Percentage depth doses, lateral beam profiles, and output factors are measured in solid water using EBT GAFCHROMIC film (International Specialty Products, Wayne, NJ) for the 6 MV radiation beams of diameter 5 to 60 mm produced by the CyberKnife (Accuray, Sunnyvale, CA). The data are compared to those measured with the PTW 60008 diode and the Wellhofer CC01 ion chamber in water. For the small radiation field sizes used in stereotactic radiosurgery, lateral electronic disequilibrium and steep dose gradients exist in a large portion of these fields, requiring the use of high-resolution measurement techniques. For small beams, the detector size approaches the dimensions of the beam and adversely affects measurement accuracy in regions where the gradient varies across the detector. When film is the detector, the scanning system is usually the resolution-limiting component. Radiographic films based upon silver halide (AgH) emulsions are widely used for relative dosimetry of external radiation treatment beams in the megavoltage energy range, because of their good spatial resolution and capability to provide integrated dosimetry over two dimensions. Film dosimetry, however, has drawbacks due to its steep energy dependence at low photon energies as well as film processor and densitometer artifacts. EBT radiochromic film, introduced in 2004 specifically for IMRT dosimetry, may be a detector of choice for the characterization of small radiosurgical beams, because of its near-tissue equivalence, radiation beam energy independence, high spatial resolution, and self developing properties. For radiation beam sizes greater than 10 mm, the film measurements were identical to those of the diode and ion chamber. For the smaller beam diameters of 7.5 and 5 mm, however, there were differences in the data measured with the different detectors, which are attributed to their different spatial resolution and non-water-equivalence.     

Possibilities for predictive measurement of the transthoracic impedance in defibrillation.

Transthoracic electrical defibrillation is administered by high voltages and currents applied through large size electrodes. Therefore, the defibrillator load impedance becomes an essential factorfor the efficacy of the procedure. Attempts at prediction of transthoracic impedance by pre-shock measurement with low-amplitude high-frequency current have yielded apparently promising results. A reassessment was undertaken of the comparison between transthoracic impedance measured over a wide frequency range (bioimpedance spectroscopy) and measured during the shock. An estimation of the possibilities for pre-shock 'prediction ' of the impedance was performed, to allow adequate selection of the defibrillation energy or current with the intention of increasing the possibility for positive results with the first shock. Data were obtained from experimental fibrillation/defibrillation cycles on dogs andfrom cardioversion of atrial fibrillation or flutter in patients. The final results suggest that high-frequency low-amplitude impedance measurements cannot predict the corresponding value during the shock with very high accuracy, as differences up to 15-17% were found using biphasic pulses in patients. However, the method can be used for approximate assessments.     

In-house development of test equipment for quality control and training. Case study: a prototype ECG simulator-tester

The support services for biomedical technology address a variety of technical and administrative issues, concerning the safe and efficient operation of medical equipment over the period of its intended use and the training of hospital personnel in issues concerning safety and quality. Clinical Engineering Departments undertake the responsibility of developing and operating training programs in medical equipment utilisation apart from the traditional role of training and supervising technicians involved in testing, calibration and preventive/corrective maintenance of electromedical equipment. In view of the above, the Institute of Biomedical Technology and the Centre of Biomedical Engineering collaborated for the design and development of a prototype digital ECG and arrhythmia simulator. In the absence of internationally accepted inspection protocols for ECG simulators, the verification phase of the project involved mainly the inspection of the device's conformity to its initial technical specifications. The results demonstrated that this tester. due to simplicity in construction and easiness of use could be a practical, reliable and economical solution for electrocardiograph and ECG monitor testing and waveform recognition training.     

A microprocessor-electrocardiograph

The electrocardiograph has eight input channels and the signals are multiplexed, digitised and stored using a microprocessor system, The 12 routine leads data are the computed and plotted by a fast microdot thermal printer/plotter. Digital filtering for EMG signals can be used and an extremely effective 50 Hz interference elimination digital filter is provided, simplifying the design of the input circuitry and avoiding the use of an earth connection. Thus 12 synchronous leads, plotted sequentially, are obtained. The necessary lead designations, filter data and error messages are automatically printed out together with the electrocardiogram. The operation includes simple pushbutton selection of one of three modes (12 leads or peripheral leads—3 s epoch each and a ll-lead 30s epoch) and the activation of a ‘start’ key     

Automatic adjustment of biphasic pulse duration in transthoracic defibrillation

Many studies have proven that biphasic defibrillation pulses are more efficient than the damped sinusoid monopolar waveform. Transthoracic resistance was shown to change during the two phases. On the other hand, it was proven that transthoracic resistance plays an important role in the defibrillation process, yielding the current for selected energy or voltage. Pre-shock measurement of the resistance may lead to improved selection. Stabilized current defibrillators are of low stored-to-delivered energy ratio. Therefore, automatic dynamic adjustment of some defibrillator parameters with respect to transthoracic resistance changes seems rational. An approach is known for modifying the pulse duration, in order to deliver a selected energy. A method is proposed here and an experimental defibrillator is developed for dynamic pulse duration adjustment with the purpose of obtaining a desired optimal timecourse of the cardiac cell transmembrane potential.