Reconstruction of parietal bone defects with adiposederived mesenchymal stem cells. Experimental study

Purpose:This study assessed the regeneration potential of mesenchymal stem cells (MSC) from adipose tissue associated with platelet-rich plasma (PRP) in bone regeneration.Methods:Thirty Wistar rats (Rattus norvegicus albinos) were divided into five groups (according to the grafting material and time to euthanasia): (1) autograft - 14 days (control), (2) autograft - 28 days (control), (3) MSC + PRP - 14 days, (4) MSC + PRP + papaverine - 14 days and (5) MSC + PRP + papaverine - 28 days. After euthanasia, the graft was removed and histological slides were prepared. They were assessed by a blinded pathologist using a previously published histological scale as parameter.Results:There was some degree of neoformed bone trabeculae (NBT) in 93.3% of the samples, as well as osteoblastic activity (OA). The autograft groups (14 and 28 days) had higher levels in the formation of bone trabeculae. Nonparametric data were analyzed using the Wilcoxon-Mann-Whitney test and proved not to be statistically significant at p < 0.05.Conclusions:Experimental parietal bone reconstruction, combining MSC, PRP and papaverine presented regeneration in all groups with no significant difference among them.Key words: Bone Regeneration, Platelet-Rich Plasma, Tissue Engineering, Rats     

Titanium dioxide nanotubes with triazine-methacrylate monomer to improve physicochemical and biological properties of adhesives

ObjectiveFormulate experimental adhesives containing titanium dioxide nanotubes (nt-TiO₂) or titanium dioxide nanotubes with a triazine-methacrylate monomer (nt-TiO₂:TAT) and evaluate the effect of these fillers on the physical, chemical, and biological properties of the adhesives.MethodsFirst, nt-TiO₂ were synthesized via a hydrothermal method. The nt-TiO₂ were mixed with a triazine-methacrylate monomer (TAT) to formulate nt-TiO₂:TAT, which were characterized by transmission electron microscopy (TEM). The nt-TiO₂, TAT, and nt-TiO₂:TAT were evaluated via Fourier Transform Infrared, Ultraviolet–visible, and micro-Raman spectroscopies. An experimental adhesive resin was formulated with bisphenol A glycerolate dimethacrylates, 2-hydroxyethyl methacrylate, and photoinitiator/co-initiator system. nt-TiO₂ or nt-TiO₂:TAT were incorporated at 2.5 wt.% and 5 wt.% in the adhesive. The base resin without nt-TiO₂ or nt-TiO₂:TAT was used as a control group. The adhesives were evaluated for antibacterial activity, cytotoxicity, polymerization kinetics, degree of conversion (DC), Knoop hardness, softening in solvent (ΔKHN%), ultimate tensile strength (UTS), 24 h- and 1 year- microtensile bond strength (μ-TBS).ResultsTEM confirmed the nanotubular morphology of TiO₂. FTIR, UV–vis, and micro-Raman analyses showed the characteristic peaks of each material, indicating the impregnation of TAT in the nt-TiO₂. Adhesives with nt-TiO₂:TAT showed antimicrobial activity against biofilm formation compared to control (p < 0.05), without differences in the viability of planktonic bacteria (p > 0.05). All groups showed high percentages of pulp cell viability. The polymerization kinetics varied among groups, but all presented DC above 50%. The addition of 5 wt.% of nt-TiO₂ and both groups containing nt-TiO₂:TAT showed higher values ??of Knoop hardness compared to the control (p < 0.05). The groups with nt-TiO₂:TAT presented lower ΔKHN% (p < 0.05) and higher UTS (p < 0.05) than the control group. After one year, the group with 5 wt.% of nt-TiO₂, as well as both groups containing nt-TiO₂:TAT, showed higher μ-TBS than the control (p < 0.05).SignificanceThe mixing of a triazine-methacrylate monomer with the nt-TiO₂ generated a filler that improved the physicochemical properties of the adhesive resins and provided antibacterial activity, which could assist in preventing carious lesions around tooth-resin interfaces. The set of physical, chemical, and biological properties of the formulated polymer, together with the greater stability of the bond strength over time, make nt-TiO₂:TAT a promising filler for dental adhesive resins.     

Impaired compensatory beta‐cell function and growth in response to high‐fat diet in LDL receptor knockout mice

In this study, we investigated the effect of low density lipoprotein receptor (LDLr) deficiency on gap junctional connexin 36 (Cx36) islet content and on the functional and growth response of pancreatic beta-cells in C57BL/6 mice fed a high-fat (HF) diet. After 60 days on regular or HF diet, the metabolic state and morphometric islet parameters of wild-type (WT) and LDLr−/− mice were assessed. HF diet-fed WT animals became obese and hypercholesterolaemic as well as hyperglycaemic, hyperinsulinaemic, glucose intolerant and insulin resistant, characterizing them as prediabetic. Also they showed a significant decrease in beta-cell secretory response to glucose. Overall, LDLr−/− mice displayed greater susceptibility to HF diet as judged by their marked cholesterolaemia, intolerance to glucose and pronounced decrease in glucose-stimulated insulin secretion. HF diet induced similarly in WT and LDLr−/− mice, a significant decrease in Cx36 beta-cell content as revealed by immunoblotting. Prediabetic WT mice displayed marked increase in beta-cell mass mainly due to beta-cell hypertrophy/replication. Nevertheless, HF diet-fed LDLr−/− mice showed no significant changes in beta-cell mass, but lower islet–duct association (neogenesis) and higher beta-cell apoptosis index were seen as compared to controls. The higher metabolic susceptibility to HF diet of LDLr−/− mice may be explained by a deficiency in insulin secretory response to glucose associated with lack of compensatory beta-cell expansion.     

Quantitative computed tomography and cranial burr holes: a model to evaluate the quality of cranial reconstruction in humans

Current methods to evaluate the biologic development of bone grafts in human beings do not quantify results accurately. Cranial burr holes are standardized critical bone defects, and the differences between bone powder and bone grafts have been determined in numerous experimental studies. This study evaluated quantitative computed tomography (QCT) as a method to objectively measure cranial bone density after cranial reconstruction with autografts. In each of 8 patients, 2 of 4 surgical burr holes were reconstructed with autogenous wet bone powder collected during skull trephination, and the other 2 holes, with a circular cortical bone fragment removed from the inner table of the cranial bone flap. After 12 months, the reconstructed areas and a sample of normal bone were studied using three-dimensional QCT; bone density was measured in Hounsfield units (HU). Mean (SD) bone density was 1535.89 (141) HU for normal bone (P < 0.0001), 964 (176) HU for bone fragments, and 453 (241) HU for bone powder (P < 0.001). As expected, the density of the bone fragment graft was consistently greater than that of bone powder. Results confirm the accuracy and reproducibility of QCT, already demonstrated for bone in other locations, and suggest that it is an adequate tool to evaluate cranial reconstructions. The combination of QCT and cranial burr holes is an excellent model to accurately measure the quality of new bone in cranial reconstructions and also seems to be an appropriate choice of experimental model to clinically test any cranial bone or bone substitute reconstruction.     

Niobium pentoxide as a novel filler for dental adhesive resin

Objectives

The purpose of this study was to develop an adhesive resin with incorporation of niobium pentoxide and evaluate its properties.

Methods

Niobium pentoxide was characterised by X-ray diffraction, surface area, particle size, micro-Raman, scanning electron microscopy and the effectiveness of silanisation process by Fourier Transform Infrared (FTIR). An experimental adhesive resin was formulated with 0, 5, 10 and 20 wt% Nb₂O₅. The formulated adhesive resins were evaluated based on microhardness, degree of conversion, radiopacity and interface (resin/dentine) characterisation by micro-Raman.

Results

The particles used in this study presented a monoclinic crystalline phase with typical chemical groups and micrometre mean size. Microhardness and radiopacity increased with higher amounts of Nb₂O₅, and the particles were able to penetrate into the hybrid layers.

Conclusions

Therefore, Nb₂O₅ may be an alternative for polymer-based biomaterials.Clinical significance: Niobium pentoxide could be used to produce adhesive resins with enhanced properties.     

Experimental dilatation of the cecum and colon in rats. IV. Evaluation of a model produced by the use of lactose in the food of animals in the chronic phase of infection by the Colombia strain of T. cruzi

Female Wistar albino rats (30 day of age) were inoculated three times in intervals of 7 days with 1 x 10(7) epimastigote forms of T. cruzi and challenged 30 days after the last inoculation with 1 x 10(5) trypomastigote forms of the Colombia strain of T. cruzi. Rats of the same sex and age were used as controls. One-hundred-fifty days after inoculation the animals were allocated into 4 groups: Group I (control), divided into subgroup L (fed lactose for 4 weeks) and subgroup S (fed saccharose for 4 weeks); Group II (inoculated), divided into subgroup L (fed lactose for 4 weeks) and subgroup S (fed saccharose for 4 weeks); Group III (control), divided into subgroup L-S (fed lactose for 4 weeks and saccharose for the following 4 weeks) and subgroup S (fed saccharose for 8 weeks); and Group IV (inoculated), divided into subgroup L-S (fed lactose for 4 weeks and saccharose for the following 4 weeks) and subgroup S (fed saccharose for 8 weeks). The disaccharide (lactose or saccharose) was added to a standard laboratory diet, 25 g/100 g of the final weight of the diet. At the end of the experimental periods the animals were sacrificed in light ether anesthesia. The volume of the large intestine was measured, and the weights of the cecum and colon were recorded.(ABSTRACT TRUNCATED AT 250 WORDS)