Combining lung-protective strategies in experimental acute lung injury: The impact of high-frequency partial liquid ventilation.

OBJECTIVE: To evaluate the independent and combined effects of high-frequency oscillatory ventilation (HFOV) and partial liquid ventilation (PLV) on gas exchange, pulmonary histopathology, inflammation, and oxidative tissue damage in an animal model of acute lung injury. DESIGN: Prospective, randomized animal study. SETTING: Research laboratory of a health sciences university. SUBJECTS: Fifty New Zealand White rabbits. INTERVENTIONS: Juvenile rabbits injured by lipopolysaccharide infusion and saline lung lavage were assigned to conventional ventilation (CMV), PLV, HFOV, or high-frequency partial liquid ventilation (HF-PLV) with a full or half dose (HF-PLV1/2) of perfluorochemical (PFC). Uninjured ventilated animals served as controls. Arterial blood gases were obtained every 30 mins during the 4-hr study. Histopathologic evaluation was performed using a lung injury scoring system. Oxidative lung injury was assessed by measuring malondialdehyde and 4-hydroxynonenal in lung homogenates. MEASUREMENTS AND MAIN RESULTS: HFOV, PLV, or a combination of both methods (HF-PLV) resulted in significantly improved oxygenation, more favorable lung histopathology, reduced neutrophil infiltration, and attenuated oxidative damage compared with CMV. HF-PLV with a full PFC dose did not provide any additional benefit compared with HFOV alone. HF-PLV1/2 was associated with decreased pulmonary leukostasis compared with HF-PLV. CONCLUSIONS: The combination of HFOV and PLV (HF-PLV) does not provide any additional benefit compared with HFOV or PLV alone in a combined model of lung injury when lung recruitment and volume optimization can be achieved. The use of a lower PFC dose (HF-PLV1/2) is associated with decreased pulmonary leukostasis compared with HF-PLV and deserves further study.     

Fabrication of Metallic Biomedical Scaffolds with the Space Holder Method: A Review

Bone tissue engineering has been increasingly studied as an alternative approach to bone defect reconstruction. In this approach, new bone cells are stimulated to grow and heal the defect with the aid of a scaffold that serves as a medium for bone cell formation and growth. Scaffolds made of metallic materials have preferably been chosen for bone tissue engineering applications where load-bearing capacities are required, considering the superior mechanical properties possessed by this type of materials to those of polymeric and ceramic materials. The space holder method has been recognized as one of the viable methods for the fabrication of metallic biomedical scaffolds. In this method, temporary powder particles, namely space holder, are devised as a pore former for scaffolds. In general, the whole scaffold fabrication process with the space holder method can be divided into four main steps: (i) mixing of metal matrix powder and space-holding particles; (ii) compaction of granular materials; (iii) removal of space-holding particles; (iv) sintering of porous scaffold preform. In this review, detailed procedures in each of these steps are presented. Technical challenges encountered during scaffold fabrication with this specific method are addressed. In conclusion, strategies are yet to be developed to address problematic issues raised, such as powder segregation, pore inhomogeneity, distortion of pore sizes and shape, uncontrolled shrinkage and contamination.     

Factors affecting stresses in cortical bone around miniscrew implants

Abstract Objective: To evaluate various types of stress in cortical bone around miniscrew implants using finite element analysis. Materials and Methods: Twenty-six three-dimensional assemblies of miniscrew models placed in alveolar bone blocks were constructed using Abaqus (Dassault Systèmes Simulia Corp, Providence, RI), a commercial finite element analysis software package. The model variables included implant design factors and bone-related factors. All miniscrew implants were loaded in the mesial direction with a linear force equal to 2 N. Peak von Mises and principal stress values in cortical bone were compared between the different models for each factor. Results: The results demonstrated that some factors affected the stresses in bone (implant diameter, implant head length, thread size, and elastic modulus of cancellous bone), while other factors did not (thread shape, thread pitch, and cortical bone thickness). Conclusions: Miniscrew implant diameter, head length, and thread size as well as the elastic modulus of cancellous bone affect the stresses in cortical bone layer surrounding the miniscrew implant and may therefore affect its stability.     

Association of calcium channel blocker use with clinical outcome of COVID-19: A meta-analysis

AimsThis meta-analysis aims to analyze the association of calcium channel blocker (CCB) use with COVID-19 clinical outcomes.MethodsPubMed, ProQuest, Science Direct, Scopus, and medRxiv databases were searched systematically in a limited period. The primary outcome was mortality.ResultsA total of 119,298 patients from 31 eligible studies were included. Pooled analysis of the random-effect model revealed CCB was not associated with reduced mortality (OR = 1.21 [95%CI: 0.98–1.49], p = 0.08). Interestingly, subgroup analysis in hypertensive patients revealed significantly reduced mortality (OR = 0.69 [95%CI: 0.52–0.91], p = 0.009).ConclusionCCB usage was not associated with the outcome of COVID-19. However, CCB was associated with a decreased mortality rate in hypertensive COVID-19 patients.     

Maternal Amino Acid Status in Severe Preeclampsia: A Cross-Sectional Study

Introduction: Preeclampsia has been one of the leading causes of maternal death in Indonesia. It is postulated that its relationship with oxidative stress may be the underlying pathology of the disease. Nutrients and amino acids have been suggested as a scavenger for oxygen-free radicals. No previous study regarding the amino acid status in preeclampsia has been conducted in women in Indonesia. Methods: This was a cross-sectional study of a total of 64 pregnant women, 30 with normal pregnancy and 34 with severe preeclampsia. Data were obtained in Cipto Mangunkusumo National Referral Hospital in Jakarta from July to December 2020. Maternal blood samples were taken during or soon after delivery. Amino acid levels were analyzed using liquid chromatography-tandem mass spectrometry (LC-MS/MS). Bivariate analysis was then performed. Results: We identified 19 different levels of amino acids in this study. Four amino acids that were elevated in the preeclampsia group were phenylalanine, serine, glycine, and glutamate. Serine (331.55 vs. 287.43; p = 0.03), glycine (183.3 vs. 234.35, p = 0.03), and glutamate levels (102.23 vs. 160.70, p = 0.000) were higher in preeclamptic patients. While in the essential amino acids group, phenylalanine levels (71.5 vs. 85.5, p = 0.023) were higher, and methionine levels (16.3 vs. 12.9, p = 0.022) were lower in preeclamptic patients. Conclusions: These findings suggest that severe preeclampsia had differences in concentration of some amino acids compared to normal pregnancy. Glutamate and methionine were associated with preeclampsia. Furthermore, a more detailed study regarding amino acids in the pathomechanism of preeclampsia is suggested.     

Oxygen-enriched surface modification for improving the dispersion of iron oxide on a porous carbon surface and its application as carbon molecular sieves (CMS) for CO2/CH4 separation

The separation of CO₂/CH₄ can be enhanced by impregnating porous carbon with iron oxide. Dispersion of iron oxide is one of the critical factors which supports the separation process performance. Iron oxide dispersion can be enhanced by enriching the oxygen functional groups on the carbon surface. This study investigates three distinct oxidation processes: oxidation with a 10% H₂O₂ solution, ozonation with distilled water, and ozonation with a 10% H₂O₂ solution. The research steps included the following: (i) oxidation, (ii) impregnation of iron oxide followed by calcination, (iii) material characterization, and (iv) material performance analysis. Materials were characterized using N₂ sorption analysis, X-ray diffraction analysis (XRD), scanning electron microscopy-energy dispersive X-ray spectroscopy analysis (SEM-EDX), and Fourier transform infrared analysis (FT-IR). Iron oxide was well dispersed on the carbon surface, as evidenced by the elemental mapping of materials. In addition, the oxygen functional groups increased significantly in the range of 28.6–79.7% following the oxidation process, as indicated by the elemental component using SEM-EDX analysis. The impregnation of iron oxide on oxidized carbon ozonated with distilled water (COA–Fe) obtained a maximum CO₂ uptake capacity of 3.0 mmol g⁻¹ and CO₂/CH₄ selectivity increased by up to 190% at a temperature of 30 °C and pressure of 1 atm. Furthermore, the enhancement of CO₂/CH₄ separation up to 1.45 times was the best performance achieved by COA–Fe. Thus, improving iron oxide dispersion on oxidized carbon surfaces has a potential application in CO₂/CH₄ separation.

The separation of CO₂/CH₄ can be enhanced by impregnating porous carbon with iron oxide.     

Are smokers rational addicts? Empirical evidence from the Indonesian Family Life Survey

Background  

Indonesia is one of the largest consumers of tobacco in the world, however there has been little work done on the economics addiction of tobacco. This study provides an empirical test of a rational addiction (henceforth RA) hypothesis of cigarette demand in Indonesia.     

New prenylated flavones from <Emphasis Type="Italic">Artocarpus champeden</Emphasis>, and their antimalarial activity in vitro

Two new prenylated flavones, artocarpones A and B (1 and 2), and seven known isoprenylated flavonoids, artonin A (3), cycloheterophyllin (4), artoindonesianin E (5), artoindonesianin R (6), heterophyllin (7), heteroflavanone C (8), and artoindonesianin A-2 (9), have been isolated from the stem bark of Artocarpus champeden. Their structures were determined by spectroscopic analysis. Among the compounds isolated, 8 had the most potent inhibitory activity against the growth of Plasmodium falciparum 3D7 clone, with an IC₅₀ value of 1 nmol L⁻¹.     

Community-acquired pneumonia in the elderly: prognostic factors

The incidence and mortality rates of community-acquired pneumonia are far higher in the elderly than among younger populations. However, the explanation may lie in the presence of comorbidity rather than in age itself. We performed a retrospective study of 226 patients over the age of 65 years who were admitted to our hospital with a diagnosis of community-acquired pneumonia over a period of 36 months, with the objective of identifying factors predicting mortality and to describe clinical features. The patients' mean age was 78.71 (65-96) years. One hundred forty-two were men (63%) and 84 were women (37%). Upon admission, 27.4% showed signs of altered mental state. The crude mortality rate was 20.8%. Multivariate analysis demonstrated the following independent risk factors associated with higher mortality: serum creatinine > 1.2 mg/dL (RR = 13.93; 95% CI 8.14-16.08); patient previously bedridden (RR = 5.73; 95% CI 3.41-6.79), PaO2/FiO2 < 200 (RR = 5; 95% CI 2.67-6.62) and neoplastic disease (RR = 4.08; 95% CI 1.96-5.24). The presence of chest pain was associated with a lower risk of mortality (RR = 0.11; 95% CI 0.01-0.54). Age itself was not a risk factor. We conclude that pneumonia in the elderly requires hospitalization and that it commonly presents with severe symptoms and high risk of mortality. Risk factors such as those identified in this study may help in the diagnosis and treatment of patients requiring special care.