The increasing prevalence of overweight and obesity among women of childbearing age is a growing public health concern in the United States. The average body mass index (BMI) is increasing among all age categories and women enter pregnancy at higher weights. Women are also more likely to retain gestational weight with each pregnancy. Women who are overweight (BMI 25–30) and obese (BMI ≥30) are at greater risk of adverse reproductive health outcomes compared to women of normal weight status (BMI 19.8–25). This article provides an overview of the complications associated with maternal overweight and obesity including diabetes, pre-eclampsia, c-sections, and birth defects. We present updated information on the weight trends among women. Finally, we present an overview of the prevention studies aimed at adolescents and women prior to pregnancy.
The World Health Report 2000 on health systems has raised concerns about its political biases, its methods and indicators, and its lack of reliable data. Tracing the origins of the Report, this article argues that it counteracts many of the concerns that gave rise to preparation of the Report in the first place. The mutually agreed-upon value-base, expressed in the Health for All strategy, has been largely abandoned. The Report includes contradictory messages, and many of its recommendations are not evidence-based. Furthermore, the ranking of countries according to their health systems' performance is not useful for health-policy-making, even if the methods and data could be improved. Because the member states and governing bodies of the WHO were not consulted during the production of the Report, the WHO secretariat has not received a mandate to change the value-base of the WHO's health policy or the aims of the Report. The WHO should return to its mandate as a normative intergovernmental U.N. agency on health. 相似文献
Abstract A blood purification system, molecular adsorbents re-circulating system (MARS), is based on the removal of both protein-bound and water-soluble substances and toxins in the liver. We treated a total of 88 patients within 2 years. Of these patients, 45 had acute liver failure (ALF), 31 had acute decompensation of chronic liver disease, eight had graft failure and four had miscellaneous conditions. Of the patients with ALF, 80% survived; in 23 patients their own liver recovered and 13 patients underwent successful transplantation. Only 23% of patients with acute-on-chronic liver failure survived. Most of them were not considered for transplantation due to their having liver failure from alcoholism and from not abstaining from drinking. MARS is a promising therapy for ALF, allowing the patient's own liver to recover or allowing enough time to find a liver graft. Best results were achieved in patients who had been intoxicated with a lethal dose of toxin. On the other hand, we did not observe much benefit in patients with severe acute-on-chronic liver failure (AcoChr) who did not undergo liver transplantation. 相似文献
Journal of Immigrant and Minority Health - Parental support is of paramount importance in the promotion of positive parenting, strengthening parenthood and protecting children from disadvantages... 相似文献
Frontal polymerization (FP) has attracted increasing interest in recent years in various applications. This polymerization method can be very promising for the polymerization of thick materials with high fillers content in the range of 50–80% (weight) by local application of a reasonable amount of energy. In this work, recent advances in controllable and predictive behavior for photoinduced frontal photopolymerization are reported. Here, tert-butyl peroxybenzoate (Luperox-P) is selected to initiate thermal polymerization at depth because its high polymerization ability and its decomposition temperature is in a promising range, i.e., neither extremely high (monomer decomposition) nor very low (storage stability issues). Thermal imaging experiments are used to follow the temperatures in the samples in real time. The number of cured layers and the depth of cure are also determined. This paper investigates various factors such as the contents of both photo and thermal initiators, the light intensity, the fiber contents, the irradiation time, etc., resulting in a statistical design of experiments with the factors: 1) content of Luperox P and 2) the irradiation time used to investigate the influence on photoinduced frontal polymerization. Markedly, FP appears to be fully controllable for a storage-stable, tunable 1K system. 相似文献
Polymeric material for 3-dimensional printing can be used to fabricate occlusal devices. However, information about fracture resistance and wear is scarce.
Purpose
The purpose of this in vitro study was to investigate the fracture resistance and 2-body wear of 3-dimensional–printed (3DP) (FotoDent splint; Dreve Dentamid GmbH), milled polymethylmethacrylate (CAM) (Temp Basic; Transpa 95H16, Zirkonzahn GmbH), and conventionally fabricated polymethylmethacrylate (CAST) (Castdon; Dreve Dentamid GmbH) occlusal devices.
Material and Methods
A total of 96 occlusal devices were prepared according to the 3 different manufacturing techniques 3DP, CAM, and CAST (n=32). For each manufacturing technique, specimens were further divided into initial fracture resistance tests (n=16) and artificial aging in the mastication simulator (50 N, 37°C) with 2-body wear followed by fracture resistance tests (n=16). The fracture resistance was determined using a universal testing machine (1 mm/min). The wear was measured after 20?000 and 120?000 mastication cycles with the replica technique, mapped with a laser scanner, and quantified in R software. Data were analyzed using a 2-way ANOVA followed by a 1-way ANOVA with Scheffé or Games-Howell post hoc tests, repeated measures ANOVA with corrected Greenhouse-Geisser P values, and the Levene, Mann-Whitney, and paired t tests (α=.05).
Results
CAM presented higher initial fracture resistance than 3DP or CAST (P<.001). After mastication simulation, CAM followed by 3DP showed higher fracture resistance than CAST (P<.001). Mastication simulation decreased the fracture resistance for CAM and CAST (P<.001) but not for 3DP (P=.78). Three-dimensional–printed occlusal devices showed the highest material volume loss, followed by CAM and the lowest in CAST (P<.001).
Conclusions
Three-dimensional–printed occlusal devices showed lower wear resistance and lower fracture resistance than those milled or conventionally fabricated. Therefore, only short-term application in the mouth is recommended. Further developments of occlusal device material for 3-dimensional printing are necessary. 相似文献
OBJECTIVE: To study the impact of 24 months of strength training on the physical function of patients with early rheumatoid arthritis (RA). METHODS: Seventy patients were assigned to either the strength training (experimental) group (n = 35) or the control group (n = 35). Patients in the experimental group performed strength training for 24 months, and control patients were instructed to perform range of motion exercises. Maximal strength of the knee extensors, trunk flexors, and extensors, as well as grip strength were recorded with dynamometers. Disease activity was assessed by the erythrocyte sedimentation rate and Ritchie's articular index, joint damage was determined by the Larsen x-ray index, and functional capacity was assessed using the Valpar 9 test and the Stanford Health Assessment Questionnaire (HAQ). The employment status of each patient was recorded. RESULTS: In the experimental group, strength training led to significant increases (19-59%) in maximal strength of the trained muscles. Such increases in the control group varied from 1% to 31%. There was a clear training effect on muscular strength in favor of the experimental group, but significant improvements in the HAQ indices as well as in the Valpar 9 test were seen also in control patients. Results of the Valpar 9 and the HAQ were statistically significantly better in patients who remained gainfully employed compared with patients who retired preterm during followup. However, compared with patients who remained in the work force, patients who retired were older, and their work was physically more demanding. CONCLUSION: As expected, strength training led to increased muscle strength, but this increase did not correlate with improved physical function as assessed by the Valpar 9 work sample test. The increased muscle performance did not prevent a substantial proportion of patients from retiring preterm. The 2 items from the Valpar 9 test that were applied were not sensitive enough to differentiate the patients according to their working status. 相似文献
Patients with paroxysmal nocturnal hemoglobinuria (PNH) have a large clonal population of blood cells deriving from hematopoietic stem cells (HSCs) deficient in glycosylphosphatidylinositol (GPI)-anchored surface molecules. A current model postulates that PNH arises through negative selection against normal HSCs exerted by autoreactive T cells, whereas PNH HSCs escape damage. We have investigated the inhibitory receptor superfamily (IRS) system in 13 patients with PNH. We found a slight increase in the proportion of T cells expressing IRS. In contrast to what applies to healthy donors, the engagement of IRS molecules on T cells from patients with PNH elicited a powerful cytolytic activity in a redirected killing assay, indicating that these IRSs belong to the activating type. This was confirmed by clonal analysis: 50% of IRS+ T-cell clones in patients with PNH were of the activating type, while only 5% were of the activating type in healthy donors. Moreover, the ligation of IRS induces (1) production of tumor necrosis factor alpha (TNF-alpha) and interferon gamma (IFN-gamma) and (2) brisk cytolytic activity against cells bearing appropriate IRS counter-ligands. In addition, these IRS+ T cells show natural killer (NK)-like cytolytic activity to which GPI- cells were less sensitive than GPI+ cells. Thus, T cells with NK-like features, expressing the activating isoforms of IRS, may include effector cells involved in the pathogenesis of PNH. 相似文献