Increased bone strontium levels in hemodialysis patients with osteomalacia

BACKGROUND: In this study, we report on the association between increased bone strontium levels and the presence of osteomalacia in end-stage renal failure patients treated by hemodialysis. METHODS: We performed a histologic examination and determined the strontium content and strontium/calcium ratios in bone biopsies of 100 hemodialysis patients recruited from various centers all over the world. Aside from the bone strontium concentration, the bone aluminum content was assessed. The bone zinc concentration, a nonrelevant element for bone toxicity, was also measured. RESULTS: Bone strontium levels and bone strontium/calcium ratios were increased in subjects with osteomalacia when compared with those with the other types of renal osteodystrophy. Bone strontium and bone calcium levels correlated with each other. The slope of the linear regression curve correlating these parameters was much steeper in the osteomalacic group (Y = 2.22X - 120) as compared with the other types of renal osteodystrophy (Y = 0.52X - 5.7). Within the group of patients with osteomalacia, bone strontium levels also significantly correlated with the bone aluminum content (r = 0.72, P = 0.018). No such correlation was found for the other types of renal osteodystrophy. The bone zinc concentration of subjects with normal renal function did not differ significantly from the values noted for the various types of renal osteodystrophy taken as separate groups, nor could increased bone zinc concentrations be associated with a particular bone lesion. CONCLUSIONS: Our data demonstrate an association between osteomalacia and increased bone strontium concentrations in dialysis patients. Further studies are warranted to establish whether strontium plays either a primary, secondary, or contributive role in the development of the latter type of renal osteodystrophy.     

Hospital services for people with HIV infection in Flanders: patients' satisfaction

Two questionnaire surveys about satisfaction with hospital services were carried out among HIV-infected people in Flanders. In a first survey (CIRCA '93 study) between 1993 and 1995, before highly active antiretroviral treatment (HAART) was available, questionnaires were distributed by HIV treatment centres, general practitioners and HIV support organizations: 315 people with HIV infection completed the questionnaire. The level of patient satisfaction was generally higher with services at university hospitals than at general hospitals. Most patients preferred to be hospitalized in a ward specialized in HIV care. Contact with other HIV-infected patients was generally experienced as supportive. The second survey included 34 patients with HIV-infection and 83 patients with lung disease. They were admitted to the same ward at the Antwerp University Hospital, between July 1996 and July 1997. Patients with HIV infections were expecting more services than patients with lung disease. Both studies showed that HIV-infected patients wanted to be actively involved in diagnostic and treatment decisions. The multidisciplinary approach, offered by the Antwerp University Hospital, was widely appreciated by patients and could be used as an example for organizing patient care for other diseases.     

Validation of a finite element model of a unilateral external fixator in a rabbit tibia defect model

In case of large segmental defects in load-bearing bones, an external fixator is used to provide mechanical stability to the defect site. The overall stiffness of the bone–fixator system is determined not only by the fixator design but also by the way the fixator is mounted to the bone. This stiffness is an important factor as it will influence the biomechanical environment to which tissue engineering scaffolds and regenerating tissues are exposed. A finite element (FE) model can be used to predict the system stiffness. The goal of this study is to develop and validate a 3D anatomical FE model of a bone–fixator system which includes a previously developed unilateral external fixator for a large segmental defect model in the rabbit tibia. It was hypothesized that the contact interfaces between bone and fixator screws play a major role for the prediction of the stiffness. In vitro mechanical testing was performed in order to measure the axial stiffness of cortical bone from mid-shaft rabbit tibiae and of the tibia–fixator system, as well as the bending stiffness of individual fixator screws, inserted in bone. μCT-based case-specific FE models of cortical bone and SCREW–BONE specimens were created to simulate the corresponding mechanical test set-ups. The Young's modulus of rabbit cortical bone as well as appropriate screw–bone contact settings were derived from those FE models. We then used the derived settings in an FE model of the tibia–fixator system. The difference between the FE predicted and measured axial stiffness of the tibia–fixator system was reduced from 117.93% to 7.85% by applying appropriate screw–bone contact settings. In conclusion, this study shows the importance of screw–bone contact settings for an accurate fixator stiffness prediction. The validated FE model can further be used as a tool for virtual mechanical testing in the design phase of new tissue engineering scaffolds and/or novel patient-specific external fixation devices.     

Antiretroviral treatments used among adults with HIV infection in Europe

International guidelines for the treatment of human immunodeficiency virus (HIV) infection change rapidly. They are mainly based on results from large-scale randomized clinical trials, but also on hypotheses. The objective of the study was to look at the use of antiretrovirals (ARVs) in different HIV treatment centres in Europe. Between August 1996 and September 1997 self-administered anonymous questionnaires were distributed to persons with HIV infection at inpatient and outpatient departments in 11 European countries; 1,366 people completed the questionnaire. Important differences in use of ARVs were noted between different centres. Zidovudine was the drug that was used predominantly in all countries and by 77% of all patients; the use of didanosine, zalcitabine and stavudine differed widely. Use of ARVs was found to be lower for people who reported intravenous drug use (compared to homosexual transmission), people with a low education level, and those with a monthly income lower than 992 Euro. The use of a protease inhibitor containing ARV treatment regimen was significantly lower in the centres in the south of Europe. Between 1996 and 1997, many persons with HIV infection in Europe received a suboptimal ARV treatment regimen. Use of ARVs should be improved for intravenous drug users, persons with lower educational level and lower income.     

Bone regeneration performance of surface-treated porous titanium

The large surface area of highly porous titanium structures produced by additive manufacturing can be modified using biofunctionalizing surface treatments to improve the bone regeneration performance of these otherwise bioinert biomaterials. In this longitudinal study, we applied and compared three types of biofunctionalizing surface treatments, namely acid–alkali (AcAl), alkali–acid–heat treatment (AlAcH), and anodizing-heat treatment (AnH). The effects of treatments on apatite forming ability, cell attachment, cell proliferation, osteogenic gene expression, bone regeneration, biomechanical stability, and bone-biomaterial contact were evaluated using apatite forming ability test, cell culture assays, and animal experiments. It was found that AcAl and AnH work through completely different routes. While AcAl improved the apatite forming ability of as-manufactured (AsM) specimens, it did not have any positive effect on cell attachment, cell proliferation, and osteogenic gene expression. In contrast, AnH did not improve the apatite forming ability of AsM specimens but showed significantly better cell attachment, cell proliferation, and expression of osteogenic markers. The performance of AlAcH in terms of apatite forming ability and cell response was in between both extremes of AnH and AsM. AcAl resulted in significantly larger volumes of newly formed bone within the pores of the scaffold as compared to AnH. Interestingly, larger volumes of regenerated bone did not translate into improved biomechanical stability as AnH exhibited significantly better biomechanical stability as compared to AcAl suggesting that the beneficial effects of cell-nanotopography modulations somehow surpassed the benefits of improved apatite forming ability. In conclusion, the applied surface treatments have considerable effects on apatite forming ability, cell attachment, cell proliferation, and bone ingrowth of the studied biomaterials. The relationship between these properties and the bone-implant biomechanics is, however, not trivial.