Five‐year efficacy of finasteride in 801 Japanese men with androgenetic alopecia

Finasteride is standard medical treatment for androgenetic alopecia; however, no large studies with 5 years or more of follow up have been performed in Japan. The authors followed Japanese men with androgenetic alopecia treated with finasteride for 5 years to evaluate long‐term treatment efficacy. Of 903 men treated with finasteride (1 mg/day), 801 patients were evaluated over 5 years by modified global photographic assessment. Although the proportion of improvement was high (99.4%), modified global photographic assessment scores after 5 years of treatment were lower in patients with more advanced disease as measured by the modified Norwood–Hamilton scale. After separating patients into “sufficient” and “insufficient” efficacy groups according to the modified global photographic assessment score after 5 years (scores ≥6 and <6, respectively), multivariate analysis showed that independent risk factors of insufficient efficacy were age at start of treatment of 40 years or more (P = 0.021) and classification on the modified Norwood–Hamilton scale (P < 0.001), whereas presence of stress at start of treatment was a negative predictor (P = 0.025). In conclusion, continuous finasteride treatment for 5 years improved androgenetic alopecia with sustained effect among Japanese. Younger age and less advanced disease at start of treatment were the key predictors of higher finasteride efficacy.     

Estimation of base blood pressure by using a new device in the outpatient clinic.

Direct measurement of intra-arterial blood pressure (BP) for 24-h provides approximately 100,000 values that vary enormously, but each (BPi) can be expressed by the equation BPi = BP0 + DeltaBPi (BP0, base BP; DeltaBPi, BP increment, i=1, 2, ..., 100 x 10(3)). About 20% of outpatients with hypertension exhibit white-coat hypertension (WCH). In such patients, DeltaBPc (i = c; c, time at the clinic) is surmised to be large. A method for explaining the physiological factors in DeltaBPc and the estimation of base BP in the outpatient clinic is important. This study addresses this issue. A total of 293 subjects were divided into four groups: 1) WCH group, 45 individuals (office BP > or = 140/90 mmHg and 24-h indirect BP < 125/80 mmHg); 2) normotensive (NT) group, 84 controls matched for age and sex; 3) WHO-I group, 95 hypertensive patients with WHO stage I (office BP > or = 140/90 mmHg and 24-h BP > or = 125/80 mmHg); and 4) WHO-II group, 69 hypertensive patients with WHO stage II. Their BPc and heart rate (HR; HRc, clinic HR) values were measured by a BP-ECG monitoring device in the outpatient clinic. Power-spectral analysis was used to obtain the ratio between the low-frequency component (LF) and high-frequency component (HF) of ECG-RR variability (LF/HF = LH). Twenty-four-hour indirect BP (and BP0) and base HR (HR0) were measured by a portable device (TM2425) at 30-min intervals. Then, DeltaBPc (= BPc - BP0) was estimated by performing linear multivariate analysis applying the model equation DeltaBPc = (BPc -alphaLH)(1-betaHR0/HRc) + epsilon to the above variables (alpha and beta, constant values; epsilon, error). This model equation made it possible to estimate BP0 (and DeltaBPc) with a high coefficient of correlation (r > or = 0.85, mean of error less than 0.82 +/- 5.9 mmHg). The predictive accuracy for discrimination between WCH and sustained hypertension (WHO-I and WHO-II groups) by this equation was 88%. The new DeltaBP-estimation device (BP-ECG monitor) enabled us to infer BP0 and is therefore useful in estimating WCH in the outpatient clinic.     

Micro-shear bond strength of dual-cured resin cement to glass ceramics.

OBJECTIVES: The aim of this study was to investigate the effects of sandblasting, etching, and a silane coupling agent on the ability of dual-cured resin cement to bond to glass ceramics designed for in indirect adhesive restoration. METHODS: A cast glass ceramic (Olympus Castable Ceramics) with a crystalline phase consisting of mica and beta-spondumene was selected as the substrate material. The glass surfaces, which were sandblasted, polished, or etched with phosphoric acid or hydrofluoric acid (HF), were bonded with a dual-cured resin cement (Panavia Fluoro Cement) using a dentin adhesive system (Clearfil SE Bond), both with and without a silane coupling agent. A micro-shear bond test was carried out to measure the bond strength of the resin cement to the glass surface. Each glass surface was bonded and tested using the shear test. In addition, surfaces with the bonding removed after the shear bond test, the adhesive interface between the glass and cement, and an etched glass surface without any bonding, were studied morphologically using scanning electron microscopy or field emission scanning electron microscopy. RESULTS: Usage of a silane coupling agent effectively raised the bond-strength values of resin cement (Fisher's PLSD, P<0.01). The effectiveness of using phosphoric acid etching to improve bonding was not clear (Fisher's PLSD, P>0.01). HF-etching for 30s seemed to over-etch the glass surface, resulting in adverse effects on bonding (Fisher's PLSD, P<0.01). SIGNIFICANCE: The micro-shear bond strength between Olympus Castable Ceramics and resin cement can be increased by the silane coupling agent used along with an acidic primer.     

Vasovagal syncope with asystole associated with intravenous access.

Two cases of vasovagal syncope (VVS) during venous access are reported. Both patients had a history of fainting episodes and experienced bradycardia with asystole, hypotension, and fainting. Pain and phobic stress during venous access triggered an increase in parasympathetic tone, resulting in bradycardia with asystole and hypotension in both cases. Hypotension and bradycardia likely caused cerebral hypoperfusion, leading to fainting. The intense parasympathetic tone triggered by somatic or emotional stress was likely responsible for directly depressing the sinus node, leading to asystole and bradycardia. Bradycardia with asystole progressing to syncope is a potentially fatal dysrhythmia in patients with cardiovascular disease or older patients with decreased cardiac function. Appropriate treatment for VVS includes the administration of intravenous fluids, vagolytics, ephedrine, and the rapid use of the Trendelenburg position. Intravenous fluids and atropine were used to treat the present patients.     

A novel quinolinone diuretic, M12285, and its activation mechanism through sulfate conjugation.

The diuretic activity of a quinolinone oxime diuretic, M12285, was examined after renal arterial, i.v. and portal injection in rats. M12285 injected into the renal artery at a dose of 1 mg/kg caused no diuretic effect, whereas i.v. and portal injections induced marked diuresis dose dependently. The minimum effective dose with portal injection was lower (1 mg/kg) than that with i.v. injection (3 mg/kg) and the start of the effect was faster with portal injection. These results indicated that some metabolic modification in the liver is necessary for the diuretic activity to appear. Accordingly, we performed in situ rat liver perfusion with M12285 and obtained several metabolites. Renal arterial injection of each fractionated metabolite of M12285 revealed that all the diuretic activity derived from one of these metabolites. From IR and 1H-nuclear magnetic resonance (1HNMR) measurements, the chemical structure of this active metabolite was assumed to be a sulfate-conjugated form of M12285 at the oxime moiety. Based on this tentative chemical structure, we synthesized the oxime sulfate of M12285 (potassium salt, M17000) and confirmed the identity of IR and 1HNMR spectra. Administration of M17000 into the renal artery induced apparent diuresis in a dose-dependent manner in both rats and dogs. These results indicate that the oxime sulfate of M12285 is responsible for the diuretic activity of M12285. Therefore, we synthesized several derivatives of M17000 and confirmed their possible therapeutic value as a novel family of diuretics, namely quinolinone oxime sulfonic acids.     

An Evaluation of the Residual Activity of Antiseptic Handrub Lotions: An ‘In Use’ Setting Study

An evaluation of the residual activity of quick-drying agents (alcoholic solutions) used for hygienic hand disinfection is described. We looked for residual efficacy following hand disinfection with soap and water alone or followed by one of two alcoholic handrub lotions supplied from an automatic hand washing machine. The bacterial counts on the hands obtained before and within 2 successive hours after disinfection showed that alcoholic chlorhexidine was the most effective for 10 minutes after contamination of the hands. WELPAS® (alcoholic chlorbenzarconium) followed this in its immediate effect and was better than soap and water alone. There were no significant differences after 30‘ or 120‘ between the three disinfecting methods.