Ultrasound-Assist Extrusion Methods for the Fabrication of Polymer Nanocomposites Based on Polypropylene/Multi-Wall Carbon Nanotubes

Isotactic polypropylenes (iPP) with different melt flow indexes (MFI) were used to fabricate nanocomposites (NCs) with 10 wt % loadings of multi-wall carbon nanotubes (MWCNTs) using ultrasound-assisted extrusion methods to determine their effect on the morphology, melt flow, and electrical properties of the NCs. Three different types of iPPs were used with MFIs of 2.5, 34 and 1200 g/10 min. Four different NC fabrication methods based on melt extrusion were used. In the first method melt extrusion fabrication without ultrasound assistance was used. In the second and third methods, an ultrasound probe attached to a hot chamber located at the exit of the die was used to subject the sample to fixed frequency and variable frequency, respectively. The fourth method is similar to the first method, with the difference being that the carbon nanotubes were treated in a fluidized air-bed with an ultrasound probe before being used in the fabrication of the NCs with no ultrasound assistance during extrusion. The samples were characterized by MFI, Optical microscopy (OM), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), electrical surface resistivity, and electric charge. MFI decreases in all cases with addition of MWCNTs with the largest decrease observed for samples with the highest MFI. The surface resistivity, which ranged from 10¹³ to 10⁵ Ω/sq, and electric charge, were observed to depend on the ultrasound-assisted fabrication method as well as on the melt flow index of the iPP. A relationship between agglomerate size and area ratio with electric charge was found. Several trends in the overall data were identified and are discussed in terms of MFI and the different fabrication methods.     

Low-dose hydrocortisone in patients with COVID-19 and severe hypoxia (COVID STEROID) trial—Protocol and statistical analysis plan

Introduction

Severe acute respiratory syndrome coronavirus-2 has caused a pandemic of coronavirus disease (COVID-19) with many patients developing hypoxic respiratory failure. Corticosteroids reduce the time on mechanical ventilation, length of stay in the intensive care unit and potentially also mortality in similar patient populations. However, corticosteroids have undesirable effects, including longer time to viral clearance. Clinical equipoise on the use of corticosteroids for COVID-19 exists.

Methods

The COVID STEROID trial is an international, randomised, stratified, blinded clinical trial. We will allocate 1000 adult patients with COVID-19 receiving ≥10 L/min of oxygen or on mechanical ventilation to intravenous hydrocortisone 200 mg daily vs placebo (0.9% saline) for 7 days. The primary outcome is days alive without life support (ie mechanical ventilation, circulatory support, and renal replacement therapy) at day 28. Secondary outcomes are serious adverse reactions at day 14; days alive without life support at day 90; days alive and out of hospital at day 90; all-cause mortality at day 28, day 90, and 1 year; and health-related quality of life at 1 year. We will conduct the statistical analyses according to this protocol, including interim analyses for every 250 patients followed for 28 days. The primary outcome will be compared using the Kryger Jensen and Lange test in the intention to treat population and reported as differences in means and medians with 95% confidence intervals.

Discussion

The COVID STEROID trial will provide important evidence to guide the use of corticosteroids in COVID-19 and severe hypoxia.

     

Approximation of diffuse attenuation,Kd, for MODIS high-resolution bands

A high resolution depth attenuation product (K_d^hires) was developed using MODIS 500 m and 250 m spectral bands. The K_d^hires was compared with Wang’s operational K_d for the Chesapeake Bay. Minimal differences were observed between the two methods, with greatest deviation occurring in areas of high turbidity in the tributaries. After tuning the new K_d^hires, the mean absolute error and bias between the two algorithms was 0.22 m^?1 and 0.026 m^?1, indicating good agreement. Higher spatial resolution provides for improved retrievals along the coast and into the narrow sections of the tributaries, coinciding with areas of concern to estuarine health and coastal management applications.     

Case of a palatal tic resembling palatal tremor in a patient with Tourette syndrome.

We describe a case of a palatal tic resembling palatal tremor (PT) in a young female patient with a previously unrecognized mild Tourette syndrome. At the time of her visit, the patient complained about ear clicks that were audible to others. We discuss the differential diagnoses of hyperkinetic palatal movements emphasizing the ongoing discussion about essential PT representing a more heterogeneous disorder than previously thought.