Ultrasound-Assist Extrusion Methods for the Fabrication of Polymer Nanocomposites Based on Polypropylene/Multi-Wall Carbon Nanotubes

Isotactic polypropylenes (iPP) with different melt flow indexes (MFI) were used to fabricate nanocomposites (NCs) with 10 wt % loadings of multi-wall carbon nanotubes (MWCNTs) using ultrasound-assisted extrusion methods to determine their effect on the morphology, melt flow, and electrical properties of the NCs. Three different types of iPPs were used with MFIs of 2.5, 34 and 1200 g/10 min. Four different NC fabrication methods based on melt extrusion were used. In the first method melt extrusion fabrication without ultrasound assistance was used. In the second and third methods, an ultrasound probe attached to a hot chamber located at the exit of the die was used to subject the sample to fixed frequency and variable frequency, respectively. The fourth method is similar to the first method, with the difference being that the carbon nanotubes were treated in a fluidized air-bed with an ultrasound probe before being used in the fabrication of the NCs with no ultrasound assistance during extrusion. The samples were characterized by MFI, Optical microscopy (OM), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), electrical surface resistivity, and electric charge. MFI decreases in all cases with addition of MWCNTs with the largest decrease observed for samples with the highest MFI. The surface resistivity, which ranged from 10¹³ to 10⁵ Ω/sq, and electric charge, were observed to depend on the ultrasound-assisted fabrication method as well as on the melt flow index of the iPP. A relationship between agglomerate size and area ratio with electric charge was found. Several trends in the overall data were identified and are discussed in terms of MFI and the different fabrication methods.     

Case of a palatal tic resembling palatal tremor in a patient with Tourette syndrome.

We describe a case of a palatal tic resembling palatal tremor (PT) in a young female patient with a previously unrecognized mild Tourette syndrome. At the time of her visit, the patient complained about ear clicks that were audible to others. We discuss the differential diagnoses of hyperkinetic palatal movements emphasizing the ongoing discussion about essential PT representing a more heterogeneous disorder than previously thought.     

Phase I trial of doxorubicin-containing low temperature sensitive liposomes in spontaneous canine tumors.

PURPOSE: To determine the maximum tolerated dose, dose-limiting toxicities, and pharmacokinetic characteristics of doxorubicin encapsulated in a low temperature sensitive liposome (LTSL) when given concurrently with local hyperthermia to canine solid tumors. EXPERIMENTAL DESIGN: Privately owned dogs with solid tumors (carcinomas or sarcomas) were treated. The tumors did not involve bone and were located at sites amenable to local hyperthermia. LTSL-doxorubicin was given (0.7-1.0 mg/kg i.v.) over 30 minutes during local tumor hyperthermia in a standard phase I dose escalation study. Three treatments, given 3 weeks apart, were scheduled. Toxicity was monitored for an additional month. Pharmacokinetics were evaluated during the first treatment cycle. RESULTS: Twenty-one patients were enrolled: 18 with sarcomas and 3 with carcinomas. Grade 4 neutropenia and acute death secondary to liver failure, possibly drug related, were the dose-limiting toxicities. The maximum tolerated dose was 0.93 mg/kg. Other toxicities, with the possible exception of renal damage, were consistent with those observed following free doxorubicin administration. Of the 20 dogs that received > or = 2 doses of LTSL-doxorubicin, 12 had stable disease, and 6 had a partial response to treatment. Pharmacokinetic variables were more similar to those of free doxorubicin than the marketed liposomal product. Tumor drug concentrations at a dose of 1.0 mg/kg averaged 9.12 +/- 6.17 ng/mg tissue. CONCLUSION: LTSL-doxorubicin offers a novel approach to improving drug delivery to solid tumors. It was well tolerated and resulted in favorable response profiles in these patients. Additional evaluation in human patients is warranted.     

Effect of a patellar realignment brace on patellofemoral relationships: Evaluation with kinematic MR imaging

The effect of a newly developed patellar realignment brace was evaluated in 21 patellofemoral joints (19 patients) with patellar subluxation (13 joints with lateral subluxation and eight with medial subluxation) by using active-movement, loaded kinematic magnetic resonance (MR) imaging. Sixteen patellofemoral joints (76%) demonstrated a qualitative correction of or improvement in patellar subluxation (ie, centralization of the patella or a decrease in the displacement of the patella) after application of the brace. Four of the five “failures” occurred in patellofemoral joints that had patella alta and/or dysplastic bone anatomy. These results indicate that the patellar realignment brace was able to counteract patellar subluxation in the majority of patellofemoral joints studied, as shown by active-movement, loaded kinematic MR imaging. This brace appears to be useful for conservative treatment of patients with patellofemoral joint pain secondary to patellar malalignment and maltracking.     

Evaluation of the influence of the aqueous phase bioconstituent environment on the F-19 T1 of perfluorocarbon blood substitute emulsions

Oxygen-sensitive F-19 magnetic resonance imaging of perfluorocarbon compounds requires that fluorocarbon T1 changes correlate with the local Po₂ and not with the composition of the surrounding aqueous phase. The influence of various bioconstituents and paramagnetic ions within the aqueous phase on the F-19 fluorocarbon phase T1 for PFC emulsions was evaluated at 0.14 and 0.66 T. T1 was measured for FC-43, perflubron, and a fluorinated surfactant. Controlled variables introduced in the aqueous phase included annex solution constituents, blood, pH changes, and Gd-DTPA. For a constant Po₂, the F-19 T1s were independent of the emulsion constituents, blood concentration, and pH. For FC-43 and perflubron, F-19 T1 was independent of the Gd-DTPA concentration, while the aqueous phase T1 decreased by more than an order of magnitude. XMO-10 (smallest emulsion particle size) showed a slight decrease in F-19 T1 with increasing Gd-DTPA concentration at 0.66 T.