FEV1/FEV6 is effective as a surrogate for FEV1/FVC in the diagnosis of chronic obstructive pulmonary disease

Background and objectiveChronic Obstructive Pulmonary Disease (COPD) causes substantial morbidity and mortality across the globe. Diagnosis of COPD requires post-bronchodilator FEV1/FVC <0.70 as per GOLD Guidelines. FVC maneuver requires a minimum of 6 seconds of forceful expiration with no flow for 1 second for an accepted effort, which lacks any fixed cut-off point. This leads to discomfort, especially in advanced COPD and old aged population. We conducted this study to find the utility of FEV1/FEV6 as a surrogate for FEV1/FVC, the correlation between the two ratios, and the fixed cut-off value of FEV1/FEV6 for COPD diagnosis.MethodsThis was a prospective, cross-sectional study approved by the institutional ethics committee conducted from January 2017 to November 2018. Consented patients above 18 years suspected of COPD underwent Spirometry as per ATS guidelines. FEV1, FEV6, FEV1/FEV6 and FEV1/FVC ratios were recorded from the best acceptable maneuver.ResultsOut of 560 screened patients, 122 diagnosed as COPD. The correlation coefficient between the post-bronchodilator FEV1/FVC ratio and FEV1/FEV6 ratio was 0.972 (p < 0.01). The relationship between the post-bronchodilator FEV1/FVC ratio and FEV1/FEV6 ratio (linear regression analysis) was found out as: FEV1/FVC = ?1.845 + 1.009(FEV1/FEV6). Using this formula, the post-bronchodilator FEV1/FEV6 value of 71.845 was obtained corresponding to the post-bronchodilator FEV1/FVC value of 70.00.ConclusionWe found a positive correlation coefficient (r = 0.972, p < 0.001) between the FEV1/FEV6 and FEV1/FVC ratios and the cut off value of 71.845 (p < 0.01) for the post-bronchodilator FEV1/FEV6 ratio for the diagnosis of COPD. Thus FEV1/FEV6 should be used as a surrogate for FEV1/FVC for the diagnosis of COPD.     

Haploidentical Hematopoietic Stem Cell Transplantation in Leukemia’s: Experience from a Cancer Center in India

There has been a surge in haploidentical hematopoietic stem cell transplantation (HSCT) in India recently. However, there is a paucity of data on haploidentical HSCT from India. The report is an analysis of data of haploidentical HSCT performed at our center. Analysis of patients with acute leukemia or chronic myeloid leukemia who underwent haploidentical HSCT during 2014–2019 was performed. The graft versus host disease (GVHD) prophylaxis was post-transplant Cyclophosphamide with Mycophenolate-mofetil and Cyclosporine. All patients were transfused peripheral blood stem cells from donors. Overall survival (OS) was calculated using the Kaplan–Meier method. Twenty-one patients underwent haploidentical HSCT. Fourteen-patients were males. The median age of patients was 15 years. Fludarabine with total body irradiation was the most common conditioning regimen (n = 15, 71.4%). The median duration for neutrophil and platelet engraftment was 14 days. Cumulative incidence of acute and chronic GVHD was 19%, and 38% respectively. The median follow-up was 26 months and the two-year OS was 38%. Twelve (57%) patients died during the study period, 8 patients (38%) died from transplant-related mortality (TRM), and 4 from disease relapse. Sepsis was the cause of death in six of the eight TRM. Nine out of 21 patients (42.8%) are leukemia-free on follow-up. Haploidentical HSCT is a promising modality of treatment in patients who have no suitable matched donors. Though the TRM remains high, good disease control was achieved in 42.8% of patients. Multi-drug resistant bacterial infection remains a challenge in performing haploidentical HSCT in developing countries.     

A modified olanzapine-based anti-emetic regimen for the control of nausea and vomiting in patients receiving weekly cisplatin

International Journal of Clinical Pharmacy - Background There is limited data on specific antiemetic protocols for control of chemotherapy-induced nausea/vomiting (CINV) caused by weekly cisplatin...     

Ovicidal, repellent, adulticidal and field evaluations of plant extract against dengue, malaria and filarial vectors

Mosquitoes are insect vectors responsible for the transmission of parasitic and viral infections to millions of people worldwide, with substantial morbidity and mortality. Infections transmitted by mosquitoes include malaria, yellow fever, chikungunya, filariasis and other arboviruses. Insecticides of botanical origin may serve as suitable alternative biocontrol techniques in the future. The adulticidal activities of crude hexane, benzene, ethyl acetate, acetone and methanol leaf extracts of Acalypha alnifolia were assayed for their toxicity against three important vector mosquitoes, viz., Aedes aegypti, Anopheles stephensi and Culex quinquefasciatus. The adult mortality was observed after 24 h of exposure. All extracts showed moderate adulticide effects; however, the highest adult mortality was found in methanol extract were observed. The LC₅₀ values of A. alnifolia leaf extracts against adulticidal activity of (hexane, benzene, ethyl acetate, acetone and methanol) A. aegypti, A. stephensi and C. quinquefasciatus were the following: A. aegypti values were 371.87, 342.97, 320.17, 300.86 and 279.75 ppm; A. stephensi values were 358.35, 336.64, 306.10, 293.01 and 274.76 ppm; C. quinquefasciatus values were 383.59, 354.13, 327.74, 314.33 and 291.71 ppm. The results of the repellent activity of hexane, benzene, ethyl acetate, acetone and methanol extract of A. alnifolia plant at three different concentrations of 1.0, 3.0, and 5.0 mg/cm² were applied on skin of forearm in man and exposed against adult female mosquitoes. In this observation, this plant crude extracts gave protection against mosquito bites without any allergic reaction to the test person, and also, the repellent activity is dependent on the strength of the plant extracts. Mean percent hatchability of the ovicidal activity was observed 48 h post-treatment. The percent hatchability was inversely proportional to the concentration of extract and directly proportional to the eggs. Mortality of 100 % with methanol extract of A. alnifolia was exerted at 125 and 300 ppm. The larval density was decreased after the treatment of plant extracts at the breeding sites (water bodies system) of vector mosquitoes, and hence, these plant extracts are suitable alternatives of synthetic insecticides for mosquito vector management.These results suggest that the leaf solvent plant extracts have the potential to be used as an ideal eco-friendly approach for the control of mosquitoes. This study provides first report on the mosquito ovicidal, repellent and adulticidal activities of these plant extracts against mosquito vector species from India.     

The rapid response and high sensitivity of a ruthenium-doped copper ferrite thin film (Ru–CuFe2O4) sensor

A sensor displaying a rapid response and high sensitivity was developed by following a simple route. Ionic defects in this sensor were explored using X-ray diffraction analysis. In general, such defects arise from a mismatch of ionic radii, which actually improves the sensing performance. SEM and TEM images of the currently produced particles demonstrated negligible agglomeration, which greatly enhanced the flow of water molecules through the particles. The current sensor showed a rapid response to changes in humidity. Its sensing performance was classified into three different ranges of humidity. Of these humidity ranges, the sensor showed the highest sensitivity (8.84 MΩ per %RH) at low relative humidity (10–20% RH). Furthermore, the sensitivity fall off as the RH was increased from 20 to 99%. The sensor showed a rapid response time of 20 s. Also, the sensor showed 92.98% reproducibility and few effects of aging.

A sensor displaying a rapid response and high sensitivity was developed by following a simple route.     

Hydrothermal synthesis of cobalt telluride nanorods for a high performance hybrid asymmetric supercapacitor

Cobalt telluride nanostructured materials have demonstrated various applications, particularly in energy generation and storage. A high temperature and reducing atmosphere are required for the preparation of cobalt telluride-based materials, which makes this a difficult and expensive process. The development of a facile route for producing the desirable nanostructure of cobalt telluride remains a great challenge. We demonstrated a simple hydrothermal method for preparing cobalt telluride nanorods (CoTe NRs) and telluride nanorods (Te NRs) for supercapacitor applications. The morphology of CoTe NRs and Te NRs was analyzed using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The prepared CoTe NR electrode material exhibited a high specific capacity of 170 C g⁻¹ at a current density of 0.5 A g⁻¹ with an exceptional cyclic stability. The asymmetric supercapacitor was assembled using CoTe NRs and orange peel-derived activated carbon (OPAA-700) as a positive and negative electrode, respectively. The fabricated device delivered a high energy density of 40.7 W h kg⁻¹ with a power density of 800 W kg⁻¹ at 1 A g⁻¹ current density. When the current density was increased to 30 A g⁻¹, the fabricated device delivered a high power density of 22.5 kW kg⁻¹ with an energy density of 16.3 W h kg⁻¹. The fabricated asymmetric supercapacitor displayed a good cyclic stability performance for 10 000 cycles at a high current density of 30 A g⁻¹ and retained 85% of its initial capacity for after 10 000 cycles. The prepared materials indicate their applicability for high performance energy storage devices.

A one-step hydrothermal derived cobalt telluride nanorods and activated carbon-based hybrid asymmetric supercapacitor delivered a high energy (40.7 W h kg⁻¹) and power density (22.5 kW kg⁻¹) with an electrochemical stability of 85% for 10000 cycles.