China special issue on gastrointestinal tumors-Radiological features of pathological complete response in mismatch repair deficient colorectal cancer after neoadjuvant PD-1 blockade: A post hoc analysis of the PICC phase II trial

Neoadjuvant programmed cell death protein 1 (PD-1) blockade exhibits promising efficacy in patients with mismatch repair deficient (dMMR) colorectal cancer (CRC). However, discrepancies between radiological and histological findings have been reported in the PICC phase II trial (NCT 03926338). Therefore, we strived to discern radiological features associated with pathological complete response (pCR) based on computed tomography (CT) images. Data were obtained from the PICC trial that included 36 tumors from 34 locally advanced dMMR CRC patients, who received neoadjuvant PD-1 blockade for 3 months. Among the 36 tumors, 28 (77.8%) tumors achieved pCR. There were no statistically significant differences in tumor longitudinal diameter, the percentage change in tumor longitudinal diameter from baseline, primary tumor sidedness, clinical stage, extramural venous invasion status, intratumoral calcification, peritumoral fat infiltration, intestinal fistula and tumor necrosis between the pCR and non-pCR tumors. Otherwise, tumors with pCR had smaller posttreatment tumor maximum thickness (median: 10 mm vs 13 mm, P = .004) and higher percentage decrease in tumor maximum thickness from baseline (52.9% vs 21.6%, P = .005) compared to non-pCR tumors. Additionally, a higher proportion of the absence of vascular sign (P = .003, odds ratio [OR] = 25.870 [95% CI, 1.357-493.110]), nodular sign (P < .001, OR = 189.000 [95% CI, 10.464-3413.803]) and extramural enhancement sign (P = .003, OR = 21.667 [2.848-164.830]) was observed in tumors with pCR. In conclusion, these CT-defined radiological features may have the potential to serve as valuable tools for clinicians in identifying patients who have achieved pCR after neoadjuvant PD-1 blockade, particularly in individuals who are willing to adopt a watch-and-wait strategy.     

右美托咪定联合综合体温保护对腔镜手术治疗老年恶性肿瘤患者苏醒期质量及免疫功能的影响

目的 探讨右美托咪定联合综合体温保护对腔镜手术治疗老年恶性肿瘤患者苏醒期质量及免疫功能的影响。方法 选择择期行腔镜手术治疗的老年恶性肿瘤患者90例，随机均分为3组：对照组（C组）、体温保护组（T组）和体温保护联合右美托咪定组（T-D组），每组30例。C组常规体温保护，T组和T-D组综合体温保护；T-D组麻醉诱导前10 min泵注右美托咪定0.5 μg/kg。记录3组患者麻醉诱导开始时（T₀）、手术开始30 min（T₁）、60 min（T₂）、90 min（T₃）、120 min（T₄）以及手术结束时（T₅）的鼻咽温度；于T₀、术后2 h（T₆）、24 h（T₇）和48 h（T₈）时抽取静脉血标本，测定T淋巴细胞亚群（CD3⁺、CD4⁺和CD8⁺）和自然杀伤细胞（NK cell）水平；记录患者术中麻醉药物用量及苏醒期质量指标。结果 与T₀比较，C组T₂～T₅时点鼻咽温度均明显降低（P < 0.05）；与C组比较，T组和T-D组T₂～T₅时点鼻咽温度明显升高（P < 0.05）。与T₀时点比较，C组、T组和T-D组T₆、T₇和T₈时点CD3⁺和NK cell活性均明显降低（P < 0.05）；C组在T₆、T₇和T₈时点，T组和T-D组在T₆和T₇时点，CD4⁺活性均明显降低（P < 0.05）。与C组比较，T组和T-D组T₆和T₇时点CD3⁺细胞活性均明显升高（P < 0.05）；T组在T₇时点，T-D组在T₆和T₇时点，CD4⁺细胞活性均明显升高（P < 0.05）；T组在T₇时点，T-D组在T₆、T₇和T₈时点，NK cell活性均明显升高（P < 0.05）。结论 采用体温保护措施联合右美托咪定能够维持老年恶性肿瘤患者的体温稳定，减少围手术期意外低体温（IPH）的发生，并有效提高患者苏醒期质量，减轻免疫抑制程度，加速患者早期恢复。     

Utility of Tissue Similarity Maps Based on Relative Cerebral Blood Volume for Grading Gliomas as Validated by Histological Results

@@     

靶向测序诊断黑棘皮病1家系

【摘要】 报道临床症状不典型的家族性黑棘皮病1家系。先证者女，4岁，自1周岁时，颈部、腹部出现黑色斑片，近年来逐渐扩大至唇周、躯干前部。腹部皮肤全反式共聚焦显微镜检查可见乳头环下延扭曲及沟壑结构，乳头环内可见中高折光颗粒结构。先证者父亲及祖母既往有类似病史，但随着年龄增长色素沉着自发性消退，仅有局部皮纹增粗。采集先证者及父母、祖母外周血，对先证者外周血DNA行Panel靶向测序，结果显示，先证者存在FGFR3基因14号外显子c.1949A>C（p.Lys650Thr）错义突变，Sanger测序验证证实先证者及其父亲和祖母均存在此突变。诊断：家族性黑棘皮病。     

生命早期抗生素使用与儿童哮喘:因果关系还是混杂效应?

儿童哮喘的发病率逐年上升.基于卫生假说,抗生素使用可能减少了微生物暴露,从而增加了过敏性疾病发生的风险.近十年来,就早期抗生素暴露与儿童哮喘的关系进行的大量的流行病学调查的结果并不一致.大多数回顾性研究发现正相关联系,但前瞻性研究未发现联系或联系强度较弱.逆向因果和指示混淆可部分解释两者的关系,但也难以否定因果关系的存在.     

Mixed Reality Combined with Three‐Dimensional Printing Technology in Total Hip Arthroplasty: An Updated Review with a Preliminary Case Presentation

Three‐dimensional (3D) printing technology, virtual reality, and augmented reality technology have been used to help surgeons to complete complex total hip arthroplasty, while their respective shortcomings limit their further application. With the development of technology, mixed reality (MR) technology has been applied to improve the success rate of complicated hip arthroplasty because of its unique advantages. We presented a case of a 59‐year‐old man with an intertrochanteric fracture in the left femur, who had received a prior left hip fusion. After admission to our hospital, a left total hip arthroplasty was performed on the patient using a combination of MR technology and 3D printing technology. Before surgery, 3D reconstruction of a certain bony landmark exposed in the surgical area was first performed. Then a veneer part was designed according to the bony landmark and connected to a reference registration landmark outside the body through a connecting rod. After that, the series of parts were made into a holistic reference registration instrument using 3D printing technology, and the patient's data for bone and surrounding tissue, along with digital 3D information of the reference registration instrument, were imported into the head‐mounted display (HMD). During the operation, the disinfected reference registration instrument was installed on the selected bony landmark, and then the automatic real‐time registration was realized by HMD through recognizing the registration landmark on the reference registration instrument, whereby the patient's virtual bone and other anatomical structures were quickly and accurately superimposed on the real body of the patient. To the best of our knowledge, this is the first report to use MR combined with 3D printing technology in total hip arthroplasty.