Explicit Finite Element Models Accurately Predict Subject-Specific and Velocity-Dependent Kinetics of Sideways Fall Impact

The majority of hip fractures in the elderly are the result of a fall from standing or from a lower height. Current injury models focus mostly on femur strength while neglecting subject-specific loading. This article presents an injury modeling strategy for hip fractures related to sideways falls that takes subject-specific impact loading into account. Finite element models (FEMs) of the human body were used to predict the experienced load and the femoral strength in a single model. We validated these models for their predicted peak force, effective pelvic stiffness, and fracture status against matching ex vivo sideways fall impacts (n = 11) with a trochanter velocity of 3.1 m/s. Furthermore, they were compared to sideways impacts of volunteers with lower impact velocities that were previously conducted by other groups. Good agreement was found between the ex vivo experiments and the FEMs with respect to peak force (root mean square error [RMSE] = 10.7%, R² = 0.85) and effective pelvic stiffness (R² = 0.92, RMSE = 12.9%). The FEMs were predictive of the fracture status for 10 out of 11 specimens. Compared to the volunteer experiments from low height, the FEMs overestimated the peak force by 25% for low BMI subjects and 8% for high BMI subjects. The effective pelvic stiffness values that were derived from the FEMs were comparable to those derived from impacts with volunteers. The force attenuation from the impact surface to the femur ranged between 27% and 54% and was highly dependent on soft tissue thickness (R² = 0.86). The energy balance in the FEMS showed that at the time of peak force 79% to 93% of the total energy is either kinetic or was transformed to soft tissue deformation. The presented FEMs allow for direct discrimination between fracture and nonfracture outcome for sideways falls and bridge the gap between impact testing with volunteers and impact conditions representative of real life falls. © 2019 American Society for Bone and Mineral Research.     

The technological imperative in tuberculosis care and prevention in Vietnam

ABSTRACT

A monocausal bacteriological understanding of infectious disease orients tuberculosis control efforts towards antimicrobial interventions. A bias towards technological solutions can leave multistranded public health and social interventions largely neglected. In the context of globalising biomedical approaches to infectious disease control, this ethnography-inspired review article reflects upon the implementation of rapid diagnostic technology in low- and middle-income countries. Fieldwork observations in Vietnam provided a stimulus for a critical review of the global rollout of tuberculosis diagnostic technology. To address local needs in tuberculosis control, health managers in resource-poor settings are readily cooperating with international donors to deploy novel diagnostic technologies throughout national tuberculosis programme facilities. Increasing investment in new diagnostic technologies is predicated on the supposition that these interventions will ameliorate disease outcomes. However, suboptimal treatment control persists even when accurate diagnostic technologies are available, suggesting that promotion of singular technological solutions can distract from addressing systemic change, without which disease susceptibility, propagation of infection, detection gaps, diagnostic delays, and treatment shortfalls persist.     

Effect of temperature on blood flow and metabolism in a neurovascular island skin flap

Using the buttock flap in 29 white Yorkshire pigs, blood flow and O2 consumption were measured at dermal temperatures between 35 degrees C and 15 degrees C. Flow was measured with an electromagnetic flowmeter and O2 consumption was calculated as the product of blood flow and the difference in flap A-VO2. Baseline flow was 6.6 +/- .9 (SE) ml/100 g/min at 35 degrees C and 3.1 +/- .02 (SE) ml/10 g/min at 15 degrees C. Blood flow through the flap stopped completely at a dermal temperature of 14 degrees C. Oxygen consumption was 0.16 +/- .02 (SE) ml/100 g/min at 35 degrees C and 0.04 +/- 0.01 (SE) ml/100 g/min at 15 degrees C. At 20 degrees C blood flow was 4.3 ml/100 g/min and metabolism was .04 ml/100 g/min. In other words, blood flow was 65% of baseline, while O2 consumption was only 25% of baseline. The therapeutic effect of local cooling at 20 degrees C deserves further investigation. The cessation of flow at 14 degrees C may be caused by increased plasma viscosity.     

The effect of pressurized carbon dioxide as a temporary plasticizer and foaming agent on the hot stage extrusion process and extrudate properties of solid dispersions of itraconazole with PVP-VA 64.

The aim of the current research project was to explore the possibilities of combining pressurized carbon dioxide with hot stage extrusion during manufacturing of solid dispersions of itraconazole and polyvinylpyrrolidone-co-vinyl acetate 64 (PVP-VA 64) and to evaluate the ability of the pressurized gas to act as a temporary plasticizer as well as to produce a foamed extrudate. Pressurized carbon dioxide was injected into a Leistritz Micro 18 intermeshing co-rotating twin-screw melt extruder using an ISCO 260D syringe pump. The physicochemical characteristics of the extrudates with and without injection of carbon dioxide were evaluated with reference to the morphology of the solid dispersion and dissolution behaviour and particle properties. Carbon dioxide acted as plasticizer for itraconazole/PVP-VA 64, reducing the processing temperature during the hot stage extrusion process. Amorphous dispersions were obtained and the solid dispersion was not influenced by the carbon dioxide. Release of itraconazole from the solid dispersion could be controlled as a function of processing temperature and pressure. The macroscopic morphology changed to a foam-like structure due to expansion of the carbon dioxide at the extrusion die. This resulted in increased specific surface area, porosity, hygroscopicity and improved milling efficiency.     

Bladder dysfunction and neurosyphilis

Neurosyphilis today is a rare problem. We describe a man who presented with organic brain syndrome, psychosis and incontinence, and diagnosis was neurosyphilis with resultant bladder dysfunction. Urodynamic studies defined the voiding dysfunction as detrusor areflexia with a positive bethanechol test. This case reminds us of the necessity of obtaining a test for venereal disease to rule out neurosyphilis in patients with idiopathic voiding dysfunction.     

Mechanical Testing of Seven Fixation Methods for Generation of Compression Across a Midtarsal Osteotomy: A Comparison of Internal and External Fixation Devices

The purpose of this study was to assess 7 methods of fixation for a midtarsal osteotomy. Polyurethane foam models (N = 6) and cadaver specimens (N = 4-7) were used to examine the force generated by the different constructs of fixation. A midtarsal osteotomy was performed on each specimen in the test groups. The osteotomies were fixated either with 2 parallel 0.062-in Kirschner wires and 40-mm-long, 4-mm partially threaded, cancellous, cannulated titanium screws, an external ring fixator (frame), a frame with wires tensioned (tension), a frame with wires tensioned and compressed toward the osteotomy (tension and compression), a frame with tension, compression, and parallel Kirschner wires, or a frame with tension, compression, and two 4.0 cannulated parallel screws, respectively. Each model was fixated, and the force generated by the construct across the osteotomy was recorded via the use of pressure-sensitive film. Statistical analysis of the data in the polyurethane foam group determined that the use of frame with tension, compression, and two 4.0 parallel cannulated screws was statistically superior to 1) frame, 2) frame with tension, 3) 2 parallel Kirschner wires, 4) two 4.0 cannulated parallel screws, and 5) frame with tension and compression. A cadaver study determined that the frame with tension, compression, and 2 parallel Kirschner wires was statistically superior to 1) frame and 2) two parallel Kirschner wires. These findings suggest that there is a difference in the force generated by the type of fixation construct across a midtarsal osteotomy.