Results of Transplanting Developing Third Molars as Part of Orthodontic Space Management

PATIENTS AND METHOD: The aim of the present study was to contribute to a more accurate indication and better integration of developing third molar transplantation into orthodontic space management, using the results gleaned from the authors' own pool of patients. For this purpose, a clinical and radiographic examination of 61 transplanted developing molars in 57 patients was carried out after an average of 3.3 years. RESULTS: The overall success rate was 85%. Failure was due in 10% of cases to impaired periodontal healing (inflammatory root resorption, ankylosis, or increased pocket probing depths) and in 5% of cases to insufficient or arrested postoperative root development accompanied by increased transplant mobility. The incidence of postoperative cessation of further root development was significantly higher (p = 0.011) in transplants at early developmental stages, which also had a negative impact on the final root length, the crown-root ratio and the mobility values of these transplants. CONCLUSIONS: The transplantation of developing third molars should be given stronger consideration in treatment plans for orthodontic space management although it represents a real alternative to orthodontic space closure only in exceptional cases. However, unlike implantological or prosthodontic treatment, it offers an opportunity to replace a missing or non-retainable tooth with a patient's own vital and fully functional tooth, provided the appropriate transplant is selected.     

Challenges that nurses face in caring for morbidly obese patients in the acute care setting.

BACKGROUND: Despite increasing numbers of morbidly obese patients admitted to acute care facilities for surgery or treatment of nonsurgical conditions, there is little evidence of the problems nurses face in providing care to these patients. Anecdotal evidence suggests that the care of these patients is more demanding than the care of nonobese patients. The objective of this study was to describe nurses' perceptions of the challenges that they face when caring for morbidly obese patients. METHODS: Focus groups of nurses from a tertiary care facility were convened. A trained facilitator posed questions to the group concerning various aspects of care for morbidly obese patients. Comments of respondents were categorized using NVIVO software. RESULTS: Nurses reported concerns about the increased staffing needs required for care of these patients and the particular challenges of the physical care. Concerns also included the availability, placement, and use of specialized equipment. Room size and the absence of some equipment were also problematic. Finally, nurses perceived safety issues, both for themselves and their patients. CONCLUSIONS: Morbidly obese patients in the acute care setting require specialized nursing care in terms of techniques, levels of staffing required, and the use of specialized equipment.     

Endoscopically controlled sinus floor augmentation. A preliminary report.

Sinus augmentation has been advocated to be a surgical technique with predictable results in peri‐implant surgery. Endoscopic surgery of the maxillary sinus so far has been used as diagnostic procedure. In this paper, the use of endoscopy is described as a low invasive adjunctive technique in sinus floor augmentation. After preparation of the mucoperiosteum, bone grafts can be placed under endoscopic control between sinus floor and mucoperiosteum. A laterobasal approach via a small osteotomy and a transalveolar approach are possible for mucosal elevation and graft placement. First clinical results are reported. Endoscopic sinus lift may contribute to a reduction of perioperative morbidity, reduction of oroantal fistulae and control of graft position. The less invasive technique may allow to extend the indication for sinus augmentation.     

Universal standardization of forearm bone densitometry.

As part of an effort to quantify device-dependent differences in forearm bone density, 101 women, aged 20-80 years (approximately 16 women in each age decade), were scanned on six forearm bone densitometers: the Aloka DCS-600EX, the Hologic QDR-4500A, the Lunar PIXI, the Norland pDEXA, the Osteometer DTX-200, and the Pronosco X-posure System. Regression statistics are reported for all similar regions of interest (ROIs). However, comparisons were confounded because of large differences in the ROI size and placement. The number of ROIs reported for a single scan by each device varied from 1 to 12. The correlation coefficients ranged from 0.7 < r < 0.97, with the highest correlation coefficients and lowest SEs for comparisons between the most similar ROIs. Standardized units of bone mineral density are derived for distal (sdBMD), mid-(smBMD), and proximal (spBMD) ROTs that allow for comparable mean bone densities to be derived for patient populations. Five phantoms were scanned and characterized on five of the devices and the precision and mean values were reported. These phantom values will aid in the in vitro cross-calibration between manufacturers to recreate the presented in vivo relationships. Care should be exercised when using these equations for cross-calibrating patient databases or pooling clinical data from different devices because the least significant differences detectable from measurements taken on two different machines can be increased substantially.     

Application of the condylar positioning appliance in mandibular sagittal split osteotomies with rigid skeletal fixation.

During orthodontic-surgical treatment of dentofacial deformities, centric relation of the mandibular condylar head to the fossa articularis must be maintained. Intraoperative application of the condylar positioning appliance, in combination with different surgical splints, allows three-dimensional adjustment of the jaw segments. The condylar positioning appliance can be used in osteotomies of the mandible alone, in isolated Le Fort I osteotomies, or in simultaneous osteotomies of the maxilla and mandible.     

Bone loss detection in rats using a mouse densitometer.

Estrogen-depletion bone-loss studies often use ovariectomized (ovx) rats and measure bone mineral density in vivo or ex vivo using DXA. Recently, a portable densitometer (PIXImus) was developed for mouse research; however, its use in rats is unclear. This study compared the ability of PIXImus and a standard densitometer (DPXL) to detect ovx-induced bone loss in rats both in vivo and ex vivo. Additionally, instrument accuracy was assessed by comparing measured bone mass with ash weight. Finally, the use of two distal femur regions of interest (ROI) to detect ovx-induced bone loss was evaluated. Twenty-three 6-month-old nulliparous female Sprague-Dawley rats were randomly assigned to sham or ovx groups. Distal femur bone mineral density was assessed at baseline and at 1 and 2 months postoperatively, using a PIXImus and DPXL densitometer. At 3 months postoperatively, all animals were killed, and ex vivo femur scans obtained. Distal femur bone loss was demonstrable by 1 month post-ovx using either densitometer. With the PIXImus, a 4-mm ROI demonstrated greater bone loss (p < 0.05) than an 8-mm ROI. Using the 4-mm ROI, similar amounts of bone loss were detected by the PIXImus and DPXL: 22.2% and 22.4%, respectively, at 2 months post-ovx. Total femur bone mineral content was overestimated by the PIXImus but highly correlated with the DPXL measurement (r = 0.988) and ash weight (r = 0.998). Given its comparability to standard DXA plus its rapid scan speed and portability, the PIXImus is useful in evaluating ovx-induced osteopenia in rats.     

Accuracy limits for the determination of cortical width and density: the influence of object size and CT imaging parameters

In this study we analysed the accuracy of computed tomography (CT) measurements in assessing cortical bone. We determined the dependency of thickness and density measurements on the true width and density of the cortex and on the spatial resolution in the CT images using two optimized segmentation methods. As a secondary goal, we assessed the ability of CT to reflect small changes in cortical thickness. Two different bone-mimicking phantoms with varying cortical thickness were scanned with single-slice CT on a Somatom Plus 4 scanner. Images were reconstructed with both a standard and a high-resolution convolution kernel. Two special operator-independent segmentation methods were used to automatically detect the edges of the cortical shell. We measured cortical thickness and density and compared the phantom measurements with theoretical computations by simulating a cross-sectional shape of the cortical shell. Based on the simulations, we calculated CT's power to detect small changes in cortical thickness. Simulations and phantom measurements were in very good agreement. Cortical thickness could be measured with an error of less than 10% if the true thickness was larger than 0.9 (0.7) mm for the standard (high-resolution) kernel which is close to the full width at half maximum (FWHM) of the point spread functions for these kernels and our scanner. Density measurements yielded errors of less than 10% for true cortical thickness values above two to three times the FWHM corresponding to 2.5 (2) mm in our case. The simulations showed that a 10% change in cortical width would not be detected with satisfying probability in bones with a cortical shell thinner than 1.2 mm. An accurate determination of the cortical thickness is limited to bones with a thickness higher than the FWHM of the scanner's point spread function. Therefore, the use of a high-resolution reconstruction kernel is crucial. Cortical bone mineral density can only be measured accurately in bones two to three times thicker than this number. In thinner bones, the measured density becomes dependent on the thickness. Changes in cortical thickness can only be assessed if the change is rather large or if the measured bone has sufficient thickness. Therefore, assessing density or thickness of the vertebral shell by CT should be treated with caution.     

Detraining Effects on Muscle Quality in Older Men with Osteosarcopenia. Follow-Up of the Randomized Controlled Franconian Osteopenia and Sarcopenia Trial (FrOST)

The present study aimed to determine the effect of detraining on muscle quality (MQ) in older men with osteosarcopenia. Forty-three community-dwelling older men (78 ± 4 years) were randomly allocated to a consistently supervised high-intensity resistance exercise training (HIRT) group (n = 21) or a control group (CG, n = 22). The HIRT scheduled a periodized single set protocol twice weekly. After the intervention, the men were subjected to six months of detraining. Muscle quality (MQ), defined as maximum isokinetic hip/leg extensor strength per unit of mid-thigh intra-fascia volume, was determined by magnetic resonance imaging (MRI) or per unit of thigh muscle mass assessed by dual-energy X-ray absorptiometry (DXA). Intention-to-treat analysis with multiple imputations was applied. We observed significant exercise effects for MQ (p = 0.001). During detraining, the HIRT group lost about one-third of the intervention-induced gain and displayed significantly (p = 0.001) higher MQ reductions compared to the CG. Nevertheless, after training and detraining, the overall intervention effect on MQ remained significant (p ≤ 0.004). In summary, six months of absence from HIRT induce a significant deleterious effect on MQ in older osteosarcopenic men. We conclude that intermitted training programs with training breaks of six months and longer should be replaced by largely continuous exercise programs, at least when addressing MQ parameters.