Determination of Mechanical Properties of Biocompatible Three-Dimensional Nanocomposites Manufactured Using Laser Methods

Porous biocompatible three-dimensional nanocomposite materials were screened for improved mechanical properties. These nanocomposite materials should be potentially appropriate as filling for surgical implants and for regenerative medicine. Nanocomposite materials based on albumin and carbon nanotubes manufactured using laser technology meet these requirements. Density of nanocomposite materials (∼1200 kg/m³) is about 10% higher than density of their matrix materials (albumin and water). Hardness of nanocomposite materials (∼300 MPa) is about five times higher than hardness of crystalline albumin. This value is significantly higher than hardness of organic glass (PMMA) and aluminum (150-200 MPa). It is close to the hardness of native human bone tissue (∼500 MPa). Reduced hardness of nanocomposite materials (∼0.3 MPa/(kg/m³)) is close to this value in native human bone tissue (0.1-0.3 MPa/(kg/m³)). It is slightly lower than the similar value in titanium and its alloys (∼0.8 MPa/(kg/m³)) and significantly higher than this parameter in organic glass (∼0.13 MPa/(kg/m³) or aluminum (∼0.07 MPa/(kg/m³)). High hardness of nanocomposite materials is probably due to their nanotubular texture. This texture is induced by laser radiation.     

Serum Ornithine Carbamoyl Transferase as a Surrogate Marker in Malaria

Ornithine carbamoyl transferase (OCT) activity and other liver function tests were studied in a total of 50 patients of clinical malaria and 15 controls. They were grouped as group I (positive for malarial parasite on peripheral blood smear, n=18), group II (negative for malarial parasite on peripheral blood smear (PBS) but responded to antimalarials, n=17) and group III (peripheral blood smear negative and did not respond to antimalarial therapy, n=15). The mean OCT levels were significantly raised in group I (6.79 ± 1.84 IU/L, p value = 0.006) and group II (5.0 ± 1.15 IU/L, p value = 0.014) as compared to controls (2.5 ± 1.13 IU/L) and returned to normal after treatment In contrast, group III had normal levels except in a case of kala azar and septicemia where OCT levels were high and increased further on treatment. Taking PBS positivity as a gold standard of diagnostic criteria, OCT had a sensitivity of 83% and specificity of 86% with a high positive predictive value of 88% as compared to ALT which had a lower sensitivity of 55% and specificity of 80%. The clinical response rate in PBS negative cases of fever having high OCT level was 83% as compared to 35% in cases with normal OCT level, making OCT a good surrogate marker of malaria. OCT levels could also be of prognostic significance as 2 cases of cerebral malaria had high OCT levels of 11.1 UAL and 10.7 IU/L, respectively.Key Words: Malaria, Ornithine carbamoyl transferase     

Spectrin-alpha I/61: a new structural variant of alpha-spectrin in a double-heterozygous form of hereditary pyropoikilocytosis

Recent biochemical studies have led to the identification of abnormal spectrins in the erythrocytes of patients with hereditary pyropoikilocytosis (HPP) and hereditary elliptocytosis (HE). In this report we describe the biochemical characterization of the erythrocytes from a proband with severe HPP who is doubly heterozygous for two mutant spectrins (Sp): Sp alpha I/74 and a new, previously undetected, mutant of alpha-spectrin designated Sp alpha I/61. The proband's erythrocytes are unstable when exposed to 45 degrees C, and her membrane skeletons exhibit instability to shear stress. The content of spectrin in the proband's erythrocyte membranes is decreased to 75% of control values. The amount of spectrin dimers in crude 4 degrees C spectrin extracts is increased (58%) as compared with control values (6% +/- 4%). Limited tryptic digestion reveals a marked decrease in the normal 80,000-dalton alpha I domain, an increase in the 74,000-dalton fragment that is characteristic of Sp alpha I/74, and an increase in a series of new fragments of 61,000, 55,000, 21,000, and 16,000 daltons. Both parents are asymptomatic, but they have increased amounts of spectrin dimers (17% to 25%). Limited tryptic digestion of the father's spectrin demonstrates the presence of a previously identified abnormal spectrin (Sp alpha I/74) that is characterized by a decrease in content of the 80,000-dalton peptide and an increase in concentration of the 74,000-dalton peptide. The mother's spectrin digests show a decrease in the amount of 80,000-dalton peptide and the formation of new peptides of 61,000, 55,000, 21,000, and 16,000 daltons. The data indicate that this severe form of HPP is due to the inheritance of two distinct abnormal spectrins, Sp alpha I/74 and a new spectrin mutant, Sp alpha I/61.     

Osteoblast growth on titanium foils coated with hydroxyapatite by pulsed laser ablation

Pulsed laser ablation is a new method for deposition of thin layers of hydroxyapatite (HA) on to biomaterial surfaces. In this paper, we report activity and morphology of osteoblasts grown on HA surfaces fabricated using different laser conditions. Two sets of films were deposited from dense HA targets, at three different laser fluences: 3, 6 and 9 Jcm(-2). One set of the surfaces was annealed at 575 degrees C to increase the crystallinity of the deposited films. Primary human osteoblasts were seeded onto the material surfaces and cytoskeletal actin organisation was examined using confocal laser scanning microscopy. The annealed surfaces supported greater cell attachment and more defined cytoskeletal actin organisation. Cell activity, measured using the alamar Blue assay, was also found to be significantly higher on the annealed samples. In addition, our results show distinct trends that correlate with the laser fluence used for deposition. The cell activity increases with increasing fluence. This pattern was repeated for alkaline phosphatase production by the cells. Differences in cell spreading were apparent which were correlated with the fluence used to deposit the HA. The optimum surface for initial attachment and spreading of osteoblasts was one of the HA films deposited using 9 J cm(-2) laser fluence and subsequently annealed at 575 degrees C.