Effects of Different Doses of Caffeinated Coffee on Muscular Endurance,Cognitive Performance,and Cardiac Autonomic Modulation in Caffeine Naive Female Athletes

Caffeine is widely consumed among elite athletes for its well-known ergogenic properties, and its ability to increase exercise performance. However, studies to date have predominantly focused on the anhydrous form of caffeine in male participants. The aim of the study was to investigate the effect of caffeinated coffee ingestion on lower-upper body muscular endurance, cognitive performance, and heart rate variability (HRV) in female athletes. A total of 17 participants (mean ± standard deviation (SD): age = 23 ± 2 years, body mass = 64 ± 4 kg, height = 168 ± 3 cm) in a randomized cross-over design completed three testing sessions, following the ingestion of 3 mg/kg/bm of caffeine (3COF), 6 mg/kg/bm of caffeine (6COF) provided from coffee or decaffeinated coffee (PLA) in 600 mL of hot water. The testing results included: (1) repetition number for muscular endurance performance; (2): reaction time and response accuracy for cognitive performance; (3): HRV parameters, such as standard deviation of normal-to-normal (NN) intervals (SDNN), standard deviation of successive differences (SDSD), root mean square of successive differences (RMSSD), total power (TP), the ratio of low- and high-frequency powers (LF/HF), high-frequency power (HF), normalized HF (HFnu), low-frequency power (LF), and normalized LF (LFnu). A one-way repeated measures ANOVA revealed that 3COF (p = 0.024) and 6COF (p = 0.036) improved lower body muscular endurance in the first set as well as cognitive performance (p = 0.025, p = 0.035 in the post-test, respectively) compared to PLA. However, no differences were detected between trials for upper body muscular endurance (p = 0.07). Lastly, all HRV parameters did not change between trials (p > 0.05). In conclusion, ingesting caffeinated coffee improved lower body muscular endurance and cognitive performance, while not adversely affecting cardiac autonomic function.     

Comparison of light transmittance in different thicknesses of zirconia under various light curing units

PURPOSE

The objective of this study was to compare the light transmittance of zirconia in different thicknesses using various light curing units.

MATERIALS AND METHODS

A total of 21 disc-shaped zirconia specimens (5 mm in diameter) in different thicknesses (0.3, 0.5 and 0.8 mm) were prepared. The light transmittance of the specimens under three different light-curing units (quartz tungsten halogen, light-emitting diodes and plasma arc) was compared by using a hand-held radiometer. Statistical significance was determined using two-way ANOVA (α=.05).

RESULTS

ANOVA revealed that thickness of zirconia and light curing unit had significant effects on light transmittance (P<.001).

CONCLUSION

Greater thickness of zirconia results in lower light transmittance. Light-emitting diodes light-curing units might be considered as effective as Plasma arc light-curing units or more effective than Quartz-tungsten-halogen light-curing units for polymerization of the resin-based materials.     

Pleural fluid neopterin levels in tuberculous pleurisy

OBJECTIVES: Neopterin is produced by stimulated macrophages under the influence of gamma interferon of lymphocyte origin. It is regarded as a biochemical marker of cell-mediated immune response. This study was designed to assess the diagnostic value of pleural fluid neopterin levels in tuberculous pleurisy in comparison with adenosine deaminase activity. DESIGN AND METHODS: Pleural fluid adenosine deaminase (ADA) activity and neopterin levels were measured in 16 patients with tuberculous pleurisy (TP) and 19 patients with malignant pleurisy (MP). ADA activity was determined by a colorimetric method, whereas neopterin levels were determined by a reversed-phase liquid chromatography technique. All values were given as median (min-max). RESULTS: The mean age was 45.43+/-20.39 years in the TP group and 60.42+/-11.02 years in the MP group (p=0.026). The median pleural fluid ADA activity was 51.75 U/L (3.50-62.40 U/L) in the TP group and was 2.30 U/L (1-8.20 U/L) in the MP group. The difference was statistically significant (p<0.001). The median pleural fluid neopterin levels were 13.15 nmol/L (1.86-59.50 nmol/L) and 2.44 nmol/L (0.92-27.60 nmol/L) in the TP group and the MP group, respectively (p=0.021). In order to evaluate the diagnostic value of pleural fluid neopterin concentrations, receiver-operating-characteristic curve analysis was performed. CONCLUSION: Pleural fluid neopterin concentration is significantly higher in TP when compared to MP, however when compared, its clinical use as a diagnostic marker is not valuable as ADA.     

The effect of zinc sulphate in the prevention of radiation-induced dermatitis

There is currently substantial clinical interest in zinc (Zn) as a protective agent against radiation-related normal tissue injury. To further assess this drug's potential, the effect of Zn was studied in rats using a radiation-induced skin injury model. Sprague-Dawley rats were divided into four groups. Group 1 received neither Zn nor irradiation (control group). Group 2 received 30 Gy of gamma irradiation as a single dose to the right hind legs of the rats (RT Group). Groups 3 and 4 received the same irradiation plus 5 mg/kg/day Zn (RT+5 Zn group) or 10 mg/kg/day Zn orally (RT+10 Zn group), respectively. The rats were irradiated using a cobalt-60 teletherapy unit. Acute skin reactions were assessed every three days by two independent radiation oncology experts. At the endpoint of the study, light-microscopic findings were assessed by two independent expert pathology physicians. Clinically and histopathologically, irradiation increased dermatitis when compared with the control group (p < 0.05). The severity of radiodermatitis of the rats in the RT+5 Zn and RT+10 Zn groups was significantly lower than in the RT group (p < 0.05); radiodermatitis was seen earlier in the RT group than in the other groups (p < 0.05). Zn was found to be efficacious in preventing epidermal atrophy, dermal degeneration such as edema and collagen fiber loss, and hair follicle atrophy. The most protection for radiation dermatitis was observed in the RT+10 Zn group. It would be worthwhile studying the effects of zinc sulphate supplements in radiation-treated cancer patients, in the hope of reducing radiation-induced toxicity.     

Effect of different light curing methods on mechanical and physical properties of resin-cements polymerized through ceramic discs

Objective

The aim of this study was to compare the polimerization ability of three different light-curing units (quartz tungsten halogen, light-emitting diodes and plasma arc) and their exposure modes (high-intensity and soft-start) by determination of microhardness, water sorption and solubility, and diametral tensile strength of 5 dual-curing resin cements.

Material and methods

A total of 720 disc-shaped samples (1 mm height and 5 mm diameter) were prepared from different dual-curing resin cements (Duolink, Nexus, Bifix-QM, Panavia F and RelyX Unicem). Photoactivation was performed by using quartz tungsten halogen (high-power and soft-up modes), light-emitting diode (standard and exponential modes) and plasma arc (normal and ramp-curing modes) curing units through ceramic discs. Then the samples (n=8/per group) were stored dry in the dark at 37ºC for 24 h. The Vickers hardness test was performed on the resin cement layer with a microhardness tester (Shimadzu HMV). For sorption and solubility tests; the samples were stored in a desiccator at 37ºC and weighed to a constant mass. The samples were weighed both before and after being immersed in deionized water for different periods of time (24 h and 7 days) and being desiccated. The diametral tensile strength of the samples was tested in a universal testing machine at a crosshead speed of 0.5 mm/min. Data were analyzed statistically by nonparametric Kruskal Wallis and Mann-Whitney U tests at 5% significance level.

Results

Resin cement and light-curing unit had significant effects (p<0.05) on microhardness, diametral tensile strength, water solubility and sorption. However, no significant differences (p>0.05) were obtained with different modes of LCUs.

Conclusion

The study indicates that polymerization of resin cements with different light-curing units may result in various polymer structures, and consequently different mechanical and physical properties.     

Effect of fiber-reinforced composite at the interface on bonding of resin core system to dentin

The aim of this study was to evaluate the effect of fiber-reinforced composite (FRC) at the interface on bonding of resin core systems to bovine dentin using different adhesive systems. To this end, the labial surfaces of 60 bovine incisors were ground to obtain flat dentin surfaces and then divided into two groups according to the adhesive system used: total-etching (Solobond Plus) versus self-etching (Clearfil SE Bond). Resin core systems were bonded to tooth structure either without or with a FRC layer (everStick Net, StickTech). For groups with FRC layer, a silicon forming aid was used to adapt the latter on the dentin surfaces. After resin core was polymerized with Optilux 501 for 40 seconds, the specimens were tested in a universal testing machine. ANOVA revealed that presence of FRC at the interface had a significantly positive effect on bond strength (p < 0.001). However, differences between groups were not significant for either adhesive system (p = 0.076) or with the use of silicon forming aid (p = 0.348).