慢性心衰患者电话干预的随机试验：DIAL试验

目的:明确集中的电话干预能否降低慢性心衰门诊患者死亡或因心衰加重而住院的发生率。设计:多中心、随机对照试验。地点:阿根廷的51个中心(包括公立、私立的医院及流动设施)。参与者:1518例患有稳定的慢性心衰且已接受最佳药物治疗方案治疗的门诊患者,由心脏科主治医师分层后随机分为电话干预组和常规治疗组。干预:在常规治疗的基础上,由一个中心通过护士频繁的电话随访对患者进行教育、辅导和监督。主要观察指标:全因死亡或由于心衰加重而住院。结果:99.5%的患者完成了全部随访。常规治疗组758例患者中由于心衰加重而住院或死亡的比例(235…     

Poly(D,L-lactide/epsilon-caprolactone)/hydroxyapatite composites as bone filler: an in vivo study in rats

In this study, a novel composite bone substitute was implanted in animal models (rats) and their in vivo characteristics were examined. A D,L-lactide and E-caprolactone copolymer (Mw: 80,000; Mn:40,000, and PI:2.00) was synthesized by ring-opening polymerization of the respective dimers using stannous octoate as the catalyst. The final ratio of D,L-lactide to epsilon-caprolactone obtained by 1NMR was 60/40. Hydroxyapatite (HA) powder was loaded in the copolymer. The HA/copolymer ratio was 60/40 (w/w). These composites were easily shaped by hand. Animal tests were performed on mature wistar rats (n=30). Defects were created on the proximal, the thickest part of the femur. The bone defects of the first group were filled with polymer/HA composite, the second group filled with only HA and the third group was left empty. Histologic examination of bone tissues showed new bone formation around the yellow-green polymer/HA composite material in the first group of animals whereas no evidence of new bone growth was observed in other groups.     

Clinical and ethical perspective of neurosurgical care in patients from beyond the southern border of Turkey: challenges of patients in war

Journal of Public Health - Because an increasing number of patients travel internationally to seek medical care, Turkey offers comprehensive and outstanding services under extraordinary conditions...     

Helical CT amniography of congenital diaphragmatic hernia

OBJECTIVE: Accurate prenatal diagnosis of congenital diaphragmatic hernia is important for perinatal planning and potential fetal surgery. We describe the application and usefulness of helical CT amniography in the evaluation of suspected congenital diaphragmatic hernia in three fetuses. CONCLUSION: Helical CT amniography is an efficient means for evaluation of congenital diaphragmatic hernia. Accurate diagnosis was made in all three patients.     

The effects of antioxidants on exercise-induced lipid peroxidation in patients with COPD

OBJEctive: The oxidant-antioxidant balance plays an important role in the pathogenesis of COPD. The aim of the present study was to evaluate the effects of exercise, as an oxidative stress factor on the oxidant-antioxidant balance and to investigate whether short-term antioxidant treatment affects lipid peroxidation products. METHODOLOGY: Twenty-one stable COPD patients and 10 control subjects were included in the study. Symptom-limited exercise tests were performed by all subjects. Blood was collected before and 1 h after exercise in control subjects and before, 1 and 3 h after exercise in COPD patients, for analysis of malondialdehyde (MDA), reduced glutathione (GSH) and vitamin E (VE) levels. VE and vitamin C treatments were added to the regular bronchodilator therapy in 10 COPD patients for 1 month. After the treatment period, an exercise test was performed and blood was collected again for MDA, GSH and VE levels. RESULTS: Baseline GSH and VE levels were significantly lower in the COPD group when compared with the control subjects. There was no statistically significant difference in MDA levels between the two groups. In the COPD group, MDA levels 3 h after exercise were significantly higher than at baseline. In contrast there were no significant differences in MDA, VE and GSH levels in the control group after exercise. VE and MDA levels increased significantly after exercise in COPD patients but there was no difference in GSH levels. Baseline exercise time was significantly lower in the COPD group than in the controls. In 10 COPD patients who were given antioxidant therapy, their exercise time increased significantly and there was no increase in MDA and VE levels after the repeated exercise test. CONCLUSIONS: Antioxidant levels were significantly lower in COPD patients than in control subjects. In these patients, exercise results in more significant oxidative stress and lipid peroxidation than in control subjects and antioxidant therapy may decrease lipid peroxidation following exercise and improve exercise capacity.     

Diagnostic utilities of tracheal ultrasound and USB-endoscope for the confirmation of endotracheal tube placement: A cadaver study

Objectives

Confirmation of the endotracheal tube placement (CoETP) has the utmost importance in the management of an airway. Visualization of tracheal rings or carina with a fiber-optical bronchoscope (FOB) has considered to be a reliable method for the CoETP. However, FOB is expensive, time-consuming, and not always practical. Inexpensive endoscopic USB-cameras were shown to aid intubation successfully and reliably. On the other hand, there have been no studies investigating their use for the CoETP. Tracheal ultrasonography (TUS) is also a new, inexpensive and widely available alternative. A cadaver study has planned to evaluate the diagnostic utility of TUS and a USB-camera.

Effect of layer thickness on the marginal and internal adaptation of laser-sintered metal frameworks

Statement of problemLaser sintering is commonly used for fabricating metal-ceramic restorations. The layer thickness of the sintering process may affect restoration adaptation. However, limited information is available regarding its impact.PurposeThe purpose of this in vitro study was to compare the marginal and internal adaptation of laser-sintered cobalt-chromium single crown frameworks sintered with layer thicknesses of 25 and 50 μm.Material and methodsThirty resin dies that represented prepared single molar abutment teeth were prepared by using a 3-dimensional printer and were divided into 3 groups (n=10) according to the method used for fabricating metal frameworks: group C, metal frameworks fabricated by using the lost-wax method (control); group L25, metal frameworks fabricated by using direct metal laser melting with a layer thickness of 25 μm; and group L50, metal frameworks fabricated by using direct metal laser melting with a layer thickness of 50 μm. After fabricating the metal frameworks, 15 vertical marginal discrepancy measurements were made in each axial region (mesial, distal, buccal, and lingual) using a stereomicroscope. Next, all the specimens were sectioned from the midline, and 5 internal discrepancy measurements were made in each internal region (inner marginal, axial, and occlusal). The data were analyzed statistically by using 1-way ANOVA, the Tukey honestly significant difference, and Tamhane T2 tests (α=.05).ResultsThe highest marginal and internal discrepancy values were obtained for metal frameworks in group C, and these values were significantly different (P<.001) from those obtained for metal frameworks in the other 2 groups. No significant difference was observed in the marginal and internal discrepancy values of metal frameworks in groups L25 and L50.ConclusionsThese results indicate that layer thickness does not affect the adaptation of laser-sintered metal frameworks, yet both sintering parameters yielded significantly lower mean marginal discrepancy values than the cast group.