单纯 Ilizarov 环形外固定技术治疗合并骨筋膜室综合征的胫骨平台骨折

目的探讨单纯 Ilizarov 环形外固定技术治疗合并骨筋膜室综合征的胫骨平台骨折的疗效。方法2013 年 9 月—2017 年 3 月，收治 30 例合并骨筋膜室综合征的胫骨平台骨折患者，采用单纯 Ilizarov 环形外固定技术治疗。男 23 例，女 7 例；年龄 23～43 岁，平均 34.4 岁。致伤原因：交通事故伤 12 例，高处坠落伤 4 例，摔伤 8 例，重物砸伤 6 例。受伤至入院时间 1～12 h，平均 4.8 h。骨折 Schatzker 分型：Ⅱ型 1 例、Ⅲ型 3 例、Ⅳ型 10 例、Ⅴ型 7 例、Ⅵ型 9 例。30 例均因骨筋膜室综合征行切开减压；切开减压至手术时间为 10～15 d，平均 12.5 d。治疗后采用膝关节学会评分系统（KSS）及 Ilizarov 方法研究与应用协会（ASAMI）协议评价膝关节功能。结果手术时间 110～155 min，平均 123.1 min；术中出血量 100～500 mL，平均 245 mL；术后住院时间 3～5 d，平均 3.8 d。患者均获随访，随访时间 20～24 周，平均 22.7 周。除 2 例患者出现针道感染征象外，无其他并发症发生。X 线片复查显示骨折均愈合，愈合时间 10～20 周，平均 14.6 周。末次随访时，膝关节 KSS 临床评分总分为 70～95 分，平均 87.5 分；功能评分总分为 70～90 分，平均 79.0 分。参照 ASAMI 协议评价获优 24 例、良 3 例、可 2 例、差 1 例。结论对于合并骨筋膜室综合征的胫骨平台骨折，单纯 Ilizarov 环形外固定技术治疗后患者关节功能可以基本恢复且并发症少，是一项相对安全、有效的治疗方法。     

TGFβ promotes YAP‐dependent AXL induction in mesenchymal‐type lung cancer cells

The acquisition of chemoresistance remains a major cause of cancer mortality due to the limited accessibility of targeted or immune therapies. However, given that severe alterations of molecular features during epithelial‐to‐mesenchymal transition (EMT) lead to acquired chemoresistance, emerging studies have focused on identifying targetable drivers associated with acquired chemoresistance. Particularly, AXL, a key receptor tyrosine kinase that confers resistance against targets and chemotherapeutics, is highly expressed in mesenchymal cancer cells. However, the underlying mechanism of AXL induction in mesenchymal cancer cells is poorly understood. Our study revealed that the YAP signature, which was highly enriched in mesenchymal‐type lung cancer, was closely correlated to AXL expression in 181 lung cancer cell lines. Moreover, using isogenic lung cancer cell pairs, we also found that doxorubicin treatment induced YAP nuclear translocation in mesenchymal‐type lung cancer cells to induce AXL expression. Additionally, the concurrent activation of TGFβ signaling coordinated YAP‐dependent AXL expression through SMAD4. These data suggest that crosstalk between YAP and the TGFβ/SMAD axis upon treatment with chemotherapeutics might be a promising target to improve chemosensitivity in mesenchymal‐type lung cancer.

Abbreviations

AUC

area under the curve

AXL

AXL receptor tyrosine kinase

BCL2

B‐cell lymphoma 2

CTD2

cancer target discovery and development

CTGF

connective tissue growth factor

DEG

differentially expressed genes

DOXO

doxorubicin

EMT

epithelial–mesenchymal transition

Eto

etoposide

FDA

Food and Drug Administration

ITGB3

integrin beta‐3

MAPK

mitogen‐activated protein kinase

MMP2

matrix metalloproteinase‐2

MMP9

matrix metalloproteinase‐9

mRNA

messenger RNA

NF‐κB

nuclear factor kappa‐light‐chain‐enhancer of activated B cells

SBE

SMAD binding element

SERPINE1

serpin family E member 1

siRNA

small interfering RNA

ssGSEA

single‐sample gene set enrichment analysis

TCGA

The Cancer Genome Atlas

TGFβ

transforming growth factor beta

YAP

Yes‐associated protein

YAP8SA

mutants of inhibitory phosphorylation site at eight serine to Alanine of YAP

ZEB1

zinc finger E‐box binding homeobox 1

ZEB2

zinc finger E‐box‐binding homeobox 2

     

High plasma microfibrillar-associated protein 4 is associated with reduced surgical repair in abdominal aortic aneurysms

ObjectiveIdentifying biomarkers for abdominal aortic aneurysms (AAA) could prove beneficial in prognosis of AAA and thus the selection for treatment. Microfibrillar-associated protein 4 (MFAP4) is an extracellular matrix protein that is highly expressed in aorta. MFAP4 is involved in several tissue remodeling-related diseases. We aimed to investigate the potential role of plasma MFAP4 (pMFAP4) as a biomarker of AAA.MethodsPlasma samples and data were obtained for 504 male AAA patients and 188 controls in the Viborg Vascular (VIVA) screening trial. The pMFAP4 levels were measured by Alphalisa. The Mann-Whitney U test assessed differences in pMFAP4 levels between the presence and absence of different exposures of interest. The correlation between pMFAP4 and aorta growth rate were investigated through spearman's correlation analysis. Immunohistochemistry and multiple logistic regression adjusted for potential confounders assessed the association between pMFAP4 and AAA. Multiple linear regression assessed the correlation between pMFAP4 and aorta growth rate. Cox regression and competing risk regression were used to investigate the correlation between AAA patients with upper tertile pMFAP4 and the risk of undergoing later surgical repair.ResultsA significant negative correlation between pMFAP4 and aorta growth rate was observed using spearman's correlation analysis (ρ = −0.14; P = .0074). However, this finding did not reach significance when applying multiple linear regression. A tendency of decreased pMFAP4 was observed in AAA using immunohistochemistry. Competing risk regression adjusted for potential confounders indicated that patients with upper tertile pMFAP4 had a hazard ratio of 0.51 (P = .001) for risk of undergoing later surgical repair.ConclusionsHigh levels of pMFAP4 are associated with a decreased likelihood of receiving surgical repair in AAA. This observation warrants confirmation in an independent cohort.     

Customized three-dimensionally printed mandibular external fixator

The advent of customized three-dimensional (3D) printing allows the affordable manufacturing of sophisticated medical devices, thereby providing swift and simple solutions to specific needs in modern healthcare. Meanwhile, certain devices such as industrial mandibular external fixators (EFs) have become less and less available from medical device companies because of decreased indications. What is more, their handling is often complex. The authors report, step by step, the original design and uneventful clinical use of a 3D-printed, customized mandibular EF. This device was designed together with a positioning and drilling guide for the fixation of a septic mandibular pseudarthrosis. It provided an adequate and satisfactory balance between lightness and rigidity. A simple, accurate and safe placement of the EF was achieved thanks to the skin-supported positioner and drilling guide, thereby making the procedure minimally invasive and time-efficient. To our knowledge, this is the first reported clinical use of a 3D-printed, customized mandibular EF to date. Because such 3D technology is becoming increasingly available to a large number of surgeons, the authors believe that the present innovation could become an alternative to reusable standard EFs.     

Standard versus customised locking plates for fixation of schatzker ii tibial plateau fractures

Aim3D-printed implants could improve the capture of fracture fragments for improved stability of tibial plateau fracture fixation. The aim of this study was to compare the biomechanical strength of fixation constructs using standard and customised 3D-printed proximal tibial locking plates for fixation of tibial plateau fractures.MethodsThis is a biomechanical study utilising six pairs of cadaveric tibiae. Fractures were created in an identical fashion using an osteotome and mallet, and fixed using either a standard, commercially-available proximal tibia locking plate or a customised 3D-printed plate. Design and production of the customised plates followed a “3D printing at point-of-care” model. Customised stainless steel 316 L plates were produced within a local additive manufacturing laboratory based upon pre-operative CT scans. Determination of implant choice within each cadaver pair was performed via simple randomisation. Following fracture fixation, the tibiae were skeletalised and biomechanically tested using a customised loading jig and a size-matched femoral knee prosthesis. The constructs were loaded cyclically from 100 N to approximately three times the cadaveric body-weight at 5 Hz for 10 000 cycles. Every 1000 cycles, the test was paused and the tibia was physically checked for failure. If failure had not occurred by the end of the testing cycle, the construct was loaded to failure and the load at which the construct failed was noted.ResultsFixation constructs using the 3D-printed plates performed comparably to those using the standard plates. There was no significant difference in the degree of fracture fragment displacement in both constructs. Overall longitudinal construct stiffness and load to failure was higher in the 3D-plates group but this did not reach statistical significance.ConclusionProduction of customised plates for proximal tibia fractures at point-of-care is feasible, however fixation constructs with these plates did not provide any biomechanical advantage over standard plates in terms of axial loading stiffness.     

A modality-specific somatosensory evoked potential test protocol for clinical evaluation: A feasibility study

ObjectiveWe aimed to establish an objective neurophysiological test protocol that can be used to assess the somatosensory nervous system.MethodsIn order to assess most fiber subtypes of the somatosensory nervous system, repetitive stimuli of seven different modalities (touch, vibration, pinprick, cold, contact heat, laser, and warmth) were synchronized with the electroencephalogram (EEG) and applied on the cheek and dorsum of the hand and dorsum of the foot in 21 healthy subjects and three polyneuropathy (PNP) patients. Latencies and amplitudes of the modalities were assessed and compared. Patients received quantitative sensory testing (QST) as reference.ResultsWe found reproducible evoked potentials recordings for touch, vibration, pinprick, contact-heat, and laser stimuli. The recording of warm-evoked potentials was challenging in young healthy subjects and not applicable in patients. Latencies were shortest within Aβ-fiber-mediated signals and longest within C-fibers. The test protocol detected function loss within the Aβ-fiber and Aδ-fiber-range in PNP patients. This function loss corresponded with QST findings.ConclusionIn this pilot study, we developed a neurophysiological test protocol that can specifically assess most of the somatosensory modalities. Despite technical challenges, initial patient data appear promising regarding a possible future clinical application.SignificanceEstablished and custom-made stimulators were combined to assess different fiber subtypes of the somatosensory nervous system using modality-specific evoked potentials.     

Molecular simplification of lipid A structure: TLR4-modulating cationic and anionic amphiphiles

A growing body of data suggests that therapies based on Toll-like receptors (TLR) targeting, in particular TLR4, holds promise in curing autoimmune and inflammatory pathologies still lacking specific treatment, included several rare diseases. While TLR4 activators (agonists) have already found successful clinical application as vaccine adjuvants, the use of TLR4 blockers (antagonists) as antisepsis agents or as agents against inflammatory diseases (including arthritis, multiple sclerosis, neuroinflammations) and cancer is still at a preclinical phase of development. This minireview focuses on recent achievements on the development of TLR4 modulators based on lipid A structure simplification, in particular on compounds having disaccharide or monosaccharide structures. As the TLR4 activity of natural TLR4 ligands (lipopolysaccharide, LPS and its biologically active part, the lipid A) depends on both the structure of endotoxin aggregates in solution and on single-molecule interaction with MD-2 and CD14 receptors, the rational design of TLR4 modulators should in principle take into account both these factors. In the light of the most recent advances in the field, in this minireview we discuss the structure–activity relationship in simplified lipid A analogs, with cationic or anionic amphiphilic structures.