改良内固定融合术治疗成人Ⅱ型痛性足副舟骨

目的探讨改良内固定融合术治疗成人Ⅱ型痛性足副舟骨（painful accessory navicular，PAN）的疗效。方法2016 年 1 月—2017 年 12 月，采用改良内固定融合术治疗 29 例（37 足）Ⅱ型 PAN。其中男 12 例，女 17 例；年龄 18～50 岁，平均 41.4 岁。扭伤 24 例，无明显诱因 5 例。患者均行 6 个月以上保守治疗，症状无明显改善。术前及末次随访时采用美国矫形足踝协会（AOFAS）中足评分评估临床疗效；X 线片测量跟骨倾斜角、距骨第 1 跖骨角、距舟关节包容角、距骨第 2 跖骨角。结果术后 1 例出现切口浅表感染，经加强换药后愈合；其余患者切口均Ⅰ期愈合，无深部感染或骨髓炎发生。29 例均获随访，随访时间 12～33 个月，平均 25.1 个月。X 线片示关节面均于术后 2～5 个月愈合，平均 3.4 个月。随访期间未见内固定物松动或断裂。末次随访时，AOFAS 疼痛、功能、力线评分及总分以及距舟关节包容角、距骨第 1 跖骨角和距骨第 2 跖骨角均较术前显著改善，差异有统计学意义（P<0.05）；跟骨倾斜角手术前后差异无统计学意义（t=1.097，P=0.276）。 结论采用改良内固定融合术治疗成人Ⅱ型 PAN 可有效缓解症状，患足功能恢复良好，并发症少。     

Interferon-induced Transmembrane Protein 3 Prevents Acute Influenza Pathogenesis in Mice

Objective Interferon-induced transmembrane protein 3(IFITM3) is an important member of the IFITM family. However, the molecular mechanisms underlying its antiviral action have not been completely elucidated. Recent studies on IFITM3, particularly those focused on innate antiviral defense mechanisms, have shown that IFITM3 affects the body's adaptive immune response. The aim of this study was to determine the contribution of IFITM3 proteins to immune control of influenza infection in vivo.Methods We performed proteomics, flow cytometry, and immunohistochemistry analysis and used bioinformatics tools to systematically compare and analyze the differences in natural killer(NK) cell numbers, their activation, and their immune function in the lungs of Ifitm3-/-and wild-type mice.Results Ifitm3-/-mice developed more severe inflammation and apoptotic responses compared to wild-type mice. Moreover, the NK cell activation was higher in the lungs of Ifitm3-/-mice during acute influenza infection.Conclusions Based on our results, we speculate that the NK cells are more readily activated in the absence of IFITM3, increasing mortality in Ifitm3-/-mice.     

Increase in Streptococcus pneumoniae serotype 3 associated parapneumonic pleural effusion/empyema after the introduction of PCV13 in Germany

IntroductionPediatric pneumococcal pneumonia complicated by parapneumonic pleural effusion/empyema (PPE/PE) remains a major concern despite general immunization with pneumococcal conjugate vaccines (PCVs).MethodsIn a nationwide pediatric hospital surveillance study in Germany we identified 584 children <18 years of age with bacteriologically confirmed PPE/PE from October 2010 to June 2018. Streptococcus pneumoniae was identified by culture and/or PCR of blood samples and/or pleural fluid and serotyped.ResultsS. pneumoniae was identified in 256 of 584 (43.8%) children by culture (n = 122) and/or PCR (n = 207). The following pneumococcal serotypes were detected in 114 children: serotype 3 (42.1%), 1 (25.4%), 7F (12.3%), 19A (7.9%), other PCV13 serotypes (4.4%) and non-PCV13 serotypes (7.9%). Between October 2010 and June 2014 serotype 1 (38.1%) and serotype 3 (25.4%) were most prevalent, whereas between July 2014 and June 2018 serotype 3 (62.7%) and non-PCV13 serotypes (15.7%) were dominant. Compared to children with other pneumococcal serotypes, children with serotype 3 associated PPE/PE were younger (median 3.2 years [IQR 2.1–4.3 years] vs. median 5.6 years [IQR 3.8–8.2 years]; p < 0.001) and more frequently admitted to intensive care (43 [89.6%] vs. 48 [73.8%]; p = 0.04). Seventy-six of 114 (66.7%) children with pneumococcal PPE/PE had been vaccinated with pneumococcal vaccines. Thirty-nine of 76 (51.3%) had received a vaccine covering the serotype detected. Thirty of these 39 breakthrough cases were age-appropriately vaccinated with PCV13 and considered vaccine failures, including 26 children with serotype 3, three children with serotype 19A and one child with serotype 1.ConclusionFollowing the introduction of PCV13 in general childhood vaccination we observed a strong emergence of serotype 3 associated PPE/PE in the German pediatric population, including a considerable number of younger children with serotype 3 vaccine breakthrough cases and failures. Future PCVs should not only cover newly emerging serotypes, but also include a more effective component against serotype 3.     

靶向测序诊断黑棘皮病1家系

【摘要】 报道临床症状不典型的家族性黑棘皮病1家系。先证者女，4岁，自1周岁时，颈部、腹部出现黑色斑片，近年来逐渐扩大至唇周、躯干前部。腹部皮肤全反式共聚焦显微镜检查可见乳头环下延扭曲及沟壑结构，乳头环内可见中高折光颗粒结构。先证者父亲及祖母既往有类似病史，但随着年龄增长色素沉着自发性消退，仅有局部皮纹增粗。采集先证者及父母、祖母外周血，对先证者外周血DNA行Panel靶向测序，结果显示，先证者存在FGFR3基因14号外显子c.1949A>C（p.Lys650Thr）错义突变，Sanger测序验证证实先证者及其父亲和祖母均存在此突变。诊断：家族性黑棘皮病。     

Differentiating autoimmune pancreatitis from pancreatic ductal adenocarcinoma with CT radiomics features

PurposeThe purpose of this study was to determine whether computed tomography (CT)-based machine learning of radiomics features could help distinguish autoimmune pancreatitis (AIP) from pancreatic ductal adenocarcinoma (PDAC).Materials and MethodsEighty-nine patients with AIP (65 men, 24 women; mean age, 59.7 ± 13.9 [SD] years; range: 21–83 years) and 93 patients with PDAC (68 men, 25 women; mean age, 60.1 ± 12.3 [SD] years; range: 36–86 years) were retrospectively included. All patients had dedicated dual-phase pancreatic protocol CT between 2004 and 2018. Thin-slice images (0.75/0.5 mm thickness/increment) were compared with thick-slices images (3 or 5 mm thickness/increment). Pancreatic regions involved by PDAC or AIP (areas of enlargement, altered enhancement, effacement of pancreatic duct) as well as uninvolved parenchyma were segmented as three-dimensional volumes. Four hundred and thirty-one radiomics features were extracted and a random forest was used to distinguish AIP from PDAC. CT data of 60 AIP and 60 PDAC patients were used for training and those of 29 AIP and 33 PDAC independent patients were used for testing.ResultsThe pancreas was diffusely involved in 37 (37/89; 41.6%) patients with AIP and not diffusely in 52 (52/89; 58.4%) patients. Using machine learning, 95.2% (59/62; 95% confidence interval [CI]: 89.8–100%), 83.9% (52:67; 95% CI: 74.7–93.0%) and 77.4% (48/62; 95% CI: 67.0–87.8%) of the 62 test patients were correctly classified as either having PDAC or AIP with thin-slice venous phase, thin-slice arterial phase, and thick-slice venous phase CT, respectively. Three of the 29 patients with AIP (3/29; 10.3%) were incorrectly classified as having PDAC but all 33 patients with PDAC (33/33; 100%) were correctly classified with thin-slice venous phase with 89.7% sensitivity (26/29; 95% CI: 78.6–100%) and 100% specificity (33/33; 95% CI: 93–100%) for the diagnosis of AIP, 95.2% accuracy (59/62; 95% CI: 89.8–100%) and area under the curve of 0.975 (95% CI: 0.936–1.0).ConclusionsRadiomic features help differentiate AIP from PDAC with an overall accuracy of 95.2%.     

中日友好医院分型股骨头坏死腓骨植入治疗的三维有限元分析

文题释义：股骨头坏死中日友好医院分型的有限元分析：根据李子荣等提出的中日友好医院分型，建立股骨头坏死三维模型，分为 M型(内侧型)、C型(中央型)和 L型(外侧型)，其中 L型包括L1型(次外侧型)、L2型(极外侧型)和 L3型(全头型)。通过对建立的模型进行有限元分析，为该分型的保髋治疗提供了一定力学依据，显示外侧柱的存留是精准预防塌陷的重要因素，为进一步实现个体化治疗提供力学基础。 腓骨支撑坏死股骨头保髋手术：是对于早中期股骨头坏死需要保留股骨头患者进行的一种手术方式。首先需对股骨头进行髓芯减压，清除一定坏死骨，空腔填塞松质骨(髂骨为主)，打压结实后植入腓骨(异体或自体)支撑，给坏死区的提供力学支撑及生物学修复，预防股骨头进一步坏死及塌陷。 背景：研究报道股骨头坏死的保髋疗效与外侧柱存留密切相关，中日友好医院分型是根据三柱结构确立的，对股骨头塌陷的预测准确性高。 目的：建立股骨头坏死中日友好医院分型各分型仿真的三维有限元模型，通过有限元分析各分型腓骨植入的力学变化，探讨外侧柱存留对保髋疗效的意义，为该分型的塌陷精准预测提供基础。 方法：建立正常股骨头、中日友好医院分型(M型、C型、L1型、L2型、L3型)股骨头坏死及其腓骨植入3组11种三维有限元模型，运用ANSYS软件进行有限元分析计算，观察各组模型的最大应力值、最大位移值及股骨头内部载荷传递模式。 结果与结论：①坏死组位移最大，应变最大，且因坏死分型不同而位移不同，位移变化如下：M型相似文献   

Customized three-dimensionally printed mandibular external fixator

The advent of customized three-dimensional (3D) printing allows the affordable manufacturing of sophisticated medical devices, thereby providing swift and simple solutions to specific needs in modern healthcare. Meanwhile, certain devices such as industrial mandibular external fixators (EFs) have become less and less available from medical device companies because of decreased indications. What is more, their handling is often complex. The authors report, step by step, the original design and uneventful clinical use of a 3D-printed, customized mandibular EF. This device was designed together with a positioning and drilling guide for the fixation of a septic mandibular pseudarthrosis. It provided an adequate and satisfactory balance between lightness and rigidity. A simple, accurate and safe placement of the EF was achieved thanks to the skin-supported positioner and drilling guide, thereby making the procedure minimally invasive and time-efficient. To our knowledge, this is the first reported clinical use of a 3D-printed, customized mandibular EF to date. Because such 3D technology is becoming increasingly available to a large number of surgeons, the authors believe that the present innovation could become an alternative to reusable standard EFs.     

Standard versus customised locking plates for fixation of schatzker ii tibial plateau fractures

Aim3D-printed implants could improve the capture of fracture fragments for improved stability of tibial plateau fracture fixation. The aim of this study was to compare the biomechanical strength of fixation constructs using standard and customised 3D-printed proximal tibial locking plates for fixation of tibial plateau fractures.MethodsThis is a biomechanical study utilising six pairs of cadaveric tibiae. Fractures were created in an identical fashion using an osteotome and mallet, and fixed using either a standard, commercially-available proximal tibia locking plate or a customised 3D-printed plate. Design and production of the customised plates followed a “3D printing at point-of-care” model. Customised stainless steel 316 L plates were produced within a local additive manufacturing laboratory based upon pre-operative CT scans. Determination of implant choice within each cadaver pair was performed via simple randomisation. Following fracture fixation, the tibiae were skeletalised and biomechanically tested using a customised loading jig and a size-matched femoral knee prosthesis. The constructs were loaded cyclically from 100 N to approximately three times the cadaveric body-weight at 5 Hz for 10 000 cycles. Every 1000 cycles, the test was paused and the tibia was physically checked for failure. If failure had not occurred by the end of the testing cycle, the construct was loaded to failure and the load at which the construct failed was noted.ResultsFixation constructs using the 3D-printed plates performed comparably to those using the standard plates. There was no significant difference in the degree of fracture fragment displacement in both constructs. Overall longitudinal construct stiffness and load to failure was higher in the 3D-plates group but this did not reach statistical significance.ConclusionProduction of customised plates for proximal tibia fractures at point-of-care is feasible, however fixation constructs with these plates did not provide any biomechanical advantage over standard plates in terms of axial loading stiffness.