Sequential Therapy Based on Evolvement of Patterns: A New Model for Treatment of Alzheimer’s Disease

In order to solve the problem of long-term (>9 months) efficacy in the treatment of Alzheimer''s disease (AD) by conventional therapy (CT), a staged and multiply-targeted sequential therapy based on the evolvement of patterns (STEP) was developed. Its main innovations include: (1) the time order of evolution of patterns defined by Chinese medicine (CM) in AD was found, that is, "the orderly pattern evolution starting from Shen (Kidney) deficiency, progressing to phlegm, stasis and fire, and worsening to severe toxin as well as functional collapse"; (2) the cascade hypothesis of Shen deficiency in AD and its sequential therapy based on Shen-reinforcing was proposed, that is, "reinforcing Shen in the early stage and throughout the whole process, resolving phlegm, activating blood and purging fire in the middle stage, detoxifying and replenishing vitality to stop the collapse in the advanced stage", and through meta-analysis, clinical drug use was optimized, thus the leap from "inferential selection" to "evidence-based selection" was realized; (3) the STEP regimen combined with CT maintained cognitive and behavioral stability in AD patients for at least 12 months, with cognitive enhancement and behavioral synergy after 9 months, and cognitive benefit was superior to CT at 9, 12, 15, 18, 21, and 24 months, respectively. The 2-year cognitive improvement rate was increased by 25.64% (P=0.020) and the cognitive deterioration rate was decreased by 48.71% (P=0.000). Among them, the cognitive and functional benefits of Shen-reinforcing therapy for very early AD (350 cases) for 1 year were better than the placebo (P<0.001), and the dementia conversion rate was reduced by 8.85% (P=0.002). The behavioral symptomatic relief of patients with vascular dementia received fire-purging therapy (540 cases) was superior to those received CT (P=0.016). These data suggested that the STEP regimen has synergistic effects on CTs at least in terms of cognitive benefit, and the earlier the use, the greater the benefit will have. Therefore, the STEP regimen should be considered as one of the clinical options, particularly for the dearth of effective pharmaceutical or immunological interventions that are currently available for AD.     

Contextualizing the lived experience of quality of life for persons with spinal cord injury: A mixed-methods application of the response shift model

Objective: The objective of this study was to gain greater insight into individuals’ quality of life (QOL) definitions, appraisals, and adaptations following spinal cord injury (SCI).

Design: A mixed-methods design, applying the Schwartz and Sprangers response shift (RS) model. RS is a cognitive process wherein, in response to a change in health status, individuals change internal standards, values, or conceptualization of QOL

Setting: Community-dwelling participants who receive medical treatment at a major Midwestern medical system and nearby Veterans’ Affairs hospital.

Participants: A purposive sample of participants with SCI (N?=?40) completed semi-structured interviews and accompanying quantitative measures.

Interventions: Not applicable.

Outcome Measures: Qualitative data were analyzed using content analysis to identify themes. Analysis of variance were performed to detect differences based on themes and QOL, well-being, and demographic and injury characteristics.

Results: Four RS themes were identified, capturing the range of participant perceptions of QOL. The themes ranged from complete RS, indicating active engagement in maintaining QOL, to awareness and comparisons redefining QOL, to a relative lack of RS. Average QOL ratings differed as a function of response shift themes. PROMIS Global Health, Anxiety, and Depression also differed as a function of RS themes.

Conclusion: The RS model contextualizes differences in QOL definitions, appraisals, and adaptations in a way standardized QOL measures alone do not.     

余尚贞以六戊年麦门冬汤治疗高血压经验浅析

高血压病为临床最常见的慢性病,余尚贞根据多年临床经验辨证,结合开、阖、枢理论,以太阴阳明升降不和为病机,从太阴阳明入手论治高血压病,结合五运六气选方六戊年麦门冬汤,临床治疗多例,疗效甚佳。开、阖、枢理论源于内经,是对人体三阴三阳经生理功能、病理特点及其相互关系的概括,我们可从中窥得开、阖、枢理论之部分面貌,比如对太阴、阳明经的了解,并拓展中医在治疗高血压病方面的治疗思路。     

Quality of life after single-incision laparoscopic cholecystectomy: A randomized,clinical trial

Background

Controversy continues as to whether single-incision laparoscopic cholecystectomy, with the somewhat larger incision at the umbilicus, may lead to a worse postoperative quality of life and more pain compared with the more classic 4-port laparoscopic cholecystectomy. The aim of this study was to compare single-incision and 4-port laparoscopic cholecystectomy from the perspective of quality of life.

Adult Renal Cell Carcinoma: A Review of Established Entities from Morphology to Molecular Genetics

According to the current World Health Organization (WHO), renal cell carcinomas (RCCs) that primarily affect adults are classified into 8 major subtypes. Additional emerging entities in renal neoplasia have also been recently recognized and these are discussed in further detail by Mehra et al (Emerging Entities in Renal Neoplasia, Surgical Pathology Clinics, 2015, Volume 8, Issue 4). In most cases, the diagnosis of a RCC subtype can be based on morphologic criteria, but in some circumstances the use of ancillary studies can aid in the diagnosis. This review discusses the morphologic, genetic, and molecular findings in RCCs previously recognized by the WHO, and provides clues to distinction from each other and some of the newer subtypes of RCC. As prognosis and therapeutic options vary for the different subtypes of RCC, accurate pathologic distinction is critical for patient care.     

Heteroepitaxy of Cerium Oxide Thin Films on Cu(111)

An important part of fundamental research in catalysis is based on theoretical and modeling foundations which are closely connected with studies of single-crystalline catalyst surfaces. These so-called model catalysts are often prepared in the form of epitaxial thin films, and characterized using advanced material characterization techniques. This concept provides the fundamental understanding and the knowledge base needed to tailor the design of new heterogeneous catalysts with improved catalytic properties. The present contribution is devoted to development of a model catalyst system of CeO₂ (ceria) on the Cu(111) substrate. We propose ways to experimentally characterize and control important parameters of the model catalyst—the coverage of the ceria layer, the influence of the Cu substrate, and the density of surface defects on ceria, particularly the density of step edges and the density and the ordering of the oxygen vacancies. The large spectrum of controlled parameters makes ceria on Cu(111) an interesting alternative to a more common model system ceria on Ru(0001) that has served numerous catalysis studies, mainly as a support for metal clusters.     

Lesion regression rate based on RECIST: prediction of treatment outcome in patients with head and neck cancer treated with chemoradiotherapy compared with FDG PET-CT

The aim of this study was to evaluate whether the lesion regression rate (ΔLR) based on the Response Evaluation Criteria in Solid Tumors (RECIST) criteria could be used for the prediction of treatment outcome in head and neck squamous cell carcinoma (HNSCC) patients treated with chemoradiotherapy (CRT) compared with FDG PET-CT. A total of 33 patients underwent MRI and PET-CT at pretreatment and at 8 weeks after CRT. We assessed the treatment outcome by analyzing the following parameters: the RECIST criteria, ΔLR, the European Organization for Research and Treatment of Cancer (EORTC) criteria, and pretreatment SUV_max of the primary tumor and node. The correlation between the analysis of the parameters and the results of the long-term follow-up of the patients was determined. The RECIST did not significantly correlate with locoregional control (LRC) or survival. The ΔLR was significantly lower for the lesions with locoregional failure (LRF) than for those with LRC. A threshold ΔLR of 48% revealed a sensitivity of 72.7% and specificity of 77.3% for the prediction of LRF. Progression-free survival (PFS) of patients with ΔLR ≥ 48% was significantly better than that of patients with ΔLR < 48% (P = 0.001), but not overall survival. There was a significant correlation between LRC and the EORTC (P = 0.02). The patients who achieved a complete response by the EORTC criteria showed significantly better PFS and overall survival (P = 0.01 and 0.04, respectively). The ΔLR was inferior to FDG PET-CT with respect to the prediction of patient survival; however, it may be useful for selecting patients in need of more aggressive monitoring after CRT.     

Current status and challenges of Additive manufacturing in orthopaedics: An overview

Additive manufacturing is a rapidly emerging technology which is being successfully implemented in the various field of medicine as well as in orthopaedics, where it has applications in reducing cartilage defects and treatments of bones. The technology helps through systematic collection of information about the shape of the "defects" and precise fabrication of complex 3D constructs such as cartilage, heart valve, trachea, myocardial bone tissue and blood vessels. In this paper, a large number of the relevant research papers on the additive manufacturing and its application in medical specifically orthopaedics are identified through Scopus had been studied using Bibliometric analysis and application analysis is undertaken. The bibliometric analysis shows that there is an increasing trend in the research reports on additive manufacturing applications in the field of orthopaedics. Discussions are on using technological advancement like scanning techniques and various challenges of the orthopaedic being met by additive manufacturing technology. For patient-specific orthopaedic applications, these techniques incorporate clinical practice and use for effective planning. 3D printed models printed by this technology are accepted for orthopaedic surgery such as revision of lumbar discectomy, pelvic surgery and large scapular osteochondroma. The applications of additive manufacturing in orthopaedics will experience a rapid translation in future. An orthopaedic surgeon can convert need/idea into a reality by using computer-aided design (CAD) software, analysis software to facilitate the manufacturing. Thus, AM provides a comprehensive opportunity to manufacture orthopaedic implantable medical devices.