Esophageal positions relative to the left atrium; data from 293 patients before catheter ablation of atrial fibrillation

AimsThree-dimensional rotational angiography (3DRA) of the left atrium (LA) and the esophagus is a simple and safe method for analyzing the relationship between the esophagus and the LA during catheter ablation of atrial fibrillation. The purpose of this study is to describe the location of the esophagus relative to the LA and mobility of the esophagus during ablation procedure.MethodsFrom 3/2011 to 9/2015, 3DRA of the LA and esophagus was performed in 326 patients before catheter ablation of atrial fibrillation. 3DRAwas performed with visualization of the esophagus via peroral administration of a contrast agent. The positions of the esophagus were determined at the beginning of the procedure, for part of patients also at the end of procedure with contrast esophagography.ResultsThe most frequent position is behind the center of the LA (91 pts., 31.9%) The least frequent position is behind the right pulmonary veins (27 pts., 9.4%). The average shift of the esophagus position was 3.36 ± 2.15 mm, 3.59 ± 2.37 mm and 3.67 ± 3.23 mm for superior, middle and inferior segment resp.ConclusionsThe position of the esophagus to the LA is highly variable. The most common position of the esophagus relative to the LA is behind the middle and left part of the posterior wall of the LA. The least frequently observed position is behind the right pulmonary veins. No significant position change of esophagus motion from before to after the ablation procedure in the majority (≥95%) of the patients was observed.     

Low-Temperature-Processed High-Performance Pentacene OTFTs with Optimal Nd-Ti Oxynitride Mixture as Gate Dielectric

When processed at a low temperature of 200 °C, organic thin-film transistors (OTFTs) with pentacene channel adopting high-k Neodymium-Titanium oxynitride mixtures (NdTiON) with various Ti contents as gate dielectrics are fabricated. The Ti content in the NdTiON is varied by co-sputtering a Ti target at 0 W, 10 W, 20 W and 30 W, respectively, while fixing the sputtering power of an Nd target at 45 W. High-performance OTFT is obtained for the 20 W-sputtered Ti, including a small threshold voltage of −0.71 V and high carrier mobility of 1.70 cm²/V·s. The mobility improvement for the optimal Ti content can be attributed to smoother dielectric surface and resultant larger overlying pentacene grains as reflected by Atomic Force Microscopy measurements. Moreover, this sample with the optimal Ti content shows much higher mobility than its counterpart processed at a higher temperature of 400 °C (0.8 cm²/V·s) because it has a thinner gate-dielectric/gate-electrode interlayer for stronger screening on the remote phonon scattering by the gate electrode. In addition, a high dielectric constant of around 10 is obtained for the NdTiON gate dielectric that contributes to a threshold voltage smaller than 1 V for the pentacene OTFT, implying the high potential of the Nd-Ti oxynitride in future high-performance organic devices.     

Influence of Solvent-Dependent Morphology on Molecular Doping and Charge Transport in Conductive Thiophene Polymer

The utility of a solvent is one of the key factors that impacts resultant film morphology. However, the effect of solvent-dependent morphology on the doping process and electrical conductivity has not been adequately elucidated. In this work, we compared the morphology of chloroform- and chlorobenzene-processed thiophene polymer films and investigated how the choice of solvent influences film morphology, doping level, charge transport properties, and thus electrical conductivity. It was found that the film drop-casted from chloroform exhibits better crystallinity than that drop-casted from chlorobenzene. The crystallinity has negligible impact on the doping level but significant impact on charge transport properties. As a result, the chloroform-processed film shows a higher electrical conductivity of up to 408 S cm⁻¹ due to a high carrier mobility related to the continuously crystalline domains in film. This finding indicates that the choice of solvent for preparation of film, which strongly correlated with molecular orientation, is a new strategy to optimize the electrical conductivity of doped polymers.     

网织红细胞膜生物物理特性的研究

用苯肼使动物造成急性溶血性贫血的方法，诱发动物体内新生网织红细胞大量增多，通过对新生网织红细胞的电泳率、渗透脆性、膜的流动性等生物物理指标连续72h的测量，发现网织红细胞在由网织红细胞转变为成熟红细胞的过程中．其生物物理特性有明显改变。这对研究由于贫血等原因造成的网织红细胞增多情况下，全血的微观流变学特性具有重要的临床意义，同时对新生网织红细胞膜的生物物理特性加以系统研究，具有重要的基础理论研究价值。