Clinical Potential of Digital Linear Tomosynthesis Imaging of Total Joint Arthroplasty

The present study was performed to evaluate the potential for clinical application of digital linear tomosynthesis in imaging hip prostheses. Volumetric x-ray digital linear tomosysnthesis was used to image hip prostheses. The tomosynthesis was compared to metal artifact reduction (MAR) computed tomography (CT), and non-MAR CT scans of a prosthesis case. The effectiveness of this method in enhancing visibility of a prosthesis case was quantified in terms of the signal-to-noise ratio (SNR), and removal of ghosting artifacts in a prosthesis case was quantified in terms of the artifact spread function (ASF). In the near in-focus plane, the contrast is greater in the MAR CT or tomosynthesis relative to the non-MAR CT. The order of ASF performance of the algorithm was as follows: (1) tomosynthesis; (2) MAR-CT; (3) non-MAR CT. The potential usefulness of digital linear tomosynthesis for evaluation of hip prostheses was demonstrated. Further studies are required to determine the ability of digital linear tomosynthesis to quantify the spatial relationships between the metallic components of these devices as well as to identify bony changes with diagnostic consequences.     

Source of the slippage in the universal joints of the Hoffmann external fixator

An investigation was conducted to determine what improvements in the resistance to slippage could be obtained in selected interfaces (rod/clip torsional, cheek/bowl and cheek/clip) of the Hoffmann external fixator. The modification involved changing the standard wing-nut clamp for a bolt with a thread of 7 mm and a 1 mm pitch and placing an FAG 28–303 thrust-bearing (needle roller and cage assembly) between the bolt and the cheek. The results showed a significant improvement in the slippage values of all interfaces; increases of approximately six times were obtained at all torque values of the wing-nut clamp or fastener tested. Such improvements would markedly increase the reliability of external fixation systems and thus reduce the incidence of loss-of-reduction of fracture due to slippage of the universal joint.     

腰椎间关节及部分相关结构的神经支配

在20具成人腰骶部脊柱标本上,观察了腰椎间关节及部分相关结构的神经分布.腰椎间关节主要由腰神经后内侧支支配,为单源多节段分布模式。后内侧支的行程为双“S”形,可使神经缓冲牵拉免受损伤,它经过狭窄弯曲的骨纤维管时可能易受嵌压导致下背痛.     

Study of the carrying angle of the human elbow joint in full extension: a morphometric analysis

This study measured the carrying angle of the elbow joint in full extension in 600 students, using the supplementary angle to that between the longitudinal axis of the arm and that of the forearm. The mean carrying angle was 12.88°±5.92: 10.97°±4.27 in men and 15.07°±4.95 in women. The carrying angle changes with skeletal growth and maturity. The angle is always greater on the side of the dominant hand. We confirmed the inverse relationship between the carrying angle and the intertrochanteric diameter. Also, the type of constitution influences the value of the carrying angle, especially in women.     

Treatment of acute post-surgical infection of joint arthroplasty

The best antibiotic regimen for acute prosthetic joint infection, treated without removal of the implant, has not been well-defined. This study describes the use of a protocol based on oral rifampicin combinations to treat 47 cases that were followed prospectively for a 2-year period. The regimen used most commonly was levofloxacin 500 mg/24 h plus rifampicin 600 mg/24 h for a mean duration of 2.7 ± 1 months. The cure rate was 76.9%, and the only independent risk-factor associated with treatment failure was infection caused by methicillin-resistant Staphylococcus aureus or Enterococcus spp. (OR 17.6, p 0.003). Overall, the results suggested that use of oral antibiotics, including rifampicin, for 2–3 months was a good treatment option.     

桡侧腕屈与腕长伸肌腱部分转位修复手部关节脱位应用解剖

目的 :为桡侧腕屈与腕长伸肌腱部分转位修复桡尺远侧及第 1腕掌关节脱位提供解剖学基础。方法 :3 0侧成人上肢标本 ,分别对桡侧腕屈肌腱、桡侧腕长伸肌腱进行形态学测量。结果 :桡侧腕长伸肌腱性部长 ( 17.8± 2 .6)cm ,肌腱的上、中、下段宽分别为 ( 13 .7± 3 .1)、( 5 .6± 1.1)和 ( 4 .6± 0 .5 7)mm肌腱的上、中、下段厚分别为 ( 1.5± 0 .5 )、( 2 .0± 0 .3 )和 ( 2 .4± 0 .3 )mm。桡侧腕屈肌腱性部长 ( 14 .3± 1.1)cm ,肌腱的上、中、下段宽分别为 ( 9.11.4)、( 5 .5± 0 .9)和 ( 4 .0± 0 .4) ,肌腱的上、中、下段厚分别为 ( 2 .4± 0 .6)、( 2 .2± 0 .4)和 ( 2 .6± 0 .5 )mm。结论 :采用桡侧腕屈肌腱和桡侧腕长伸肌腱部分转位 ,有足够的长度和强度 ,适用于桡尺远侧关节或第 1腕掌关节脱位的修复 ,临床应用获得良好效果     

肱骨远端的解剖观测与肱骨假体的设计

目的:为临床肱骨远端假体的设计与安放提供相关数据。方法:测量120块(男35对、女25对)成人干燥肱骨远端相关结构,对所测得结果用SPSS软件处理。结果:(1)肱骨远端前倾角和肱骨滑车外旋角,男女分别为(35.78±5.12)°、(36.33±5.06)°和(5.35±1.13)°、(5.55±1.22)°。(2)内上髁至外上髁最大宽度、滑车最内侧缘至小头最外侧缘宽度、肱骨滑车和肱骨小头宽度男女分别为(58.92±4.03)、(55.75±3.85);(45.34±3.15)、(42.18±3.01);(24.82±1.74)、(21.78±1.51)和(17.69±1.23)、(16.39±1.21)mm。(3)肱骨滑车和肱骨小头最大矢径男女分别为(23.35±2.06)、(23.13±2.15)和(19.47±1.38)、(19.13±2.19)mm。男女之间和左右之间各测量数据无显著性差异(P>0.05)。个体间有较大差异。结论:肱骨远端各项目的测量值,可供设计与安放肱骨假体提供解剖参数。     

不同位置植入SMH人工腰椎间盘对小关节应力分布的影响

目的:通过三维有限元方法研究正常椎间盘、SMH人工腰椎间盘前置、中置和后置四组模型中小关节的应力分布情况,探讨不同位置植入SMH人工腰椎间盘对小关节应力分布的影响。方法:建立正常腰椎间盘、人工SMH腰椎间盘前置、中置和后置的三维模型,然后模拟腰椎节段的运动,进行小关节应力分布的比较研究。结果:与正常L4/5椎间盘模型相比,除SMH人工腰椎间盘前置模型前屈时比正常模型小关节应力小外,其余运动时SMH人工腰椎间盘前置、中置和后置模型中小关节的应力均高于正常腰椎间盘组,但后置SMH人工腰椎间盘组则相对较小。结论:SMH人工腰椎间盘后置可以更好地预防小关节的退变;人工椎间盘植入位置的不同对人工腰椎间盘术远期疗效的预测具一定的作用。     

全膝关节置换后不放置引流的相关管理策略

背景:近年来,随着全膝关节置换技术提升、手术时间缩短、术中及术后止血药的应用,其总失血量不断减少,术后引流量也逐渐减少,术后快速康复理论应运而生,引流管放置也再次成为骨科医生所热议的问题,越来越多的医生认为可以常规取消放置引流,引流似乎已可有可无。目的:旨在复习既往文献,对全膝关节置换后引流放置的相关问题归纳总结,提供围术期引流管理的相关经验。方法:检索中国知网、万方、维普、中国生物医学文献数据库等中文数据库,以及PubMed、The Cochrane Library、WebofScience、EMBASE、OVID等外文数据库,以"引流,膝关节置换术"及"totalknee arthroplasty,drainage"为检索词,检索自建库始至2020年2月为止所有与主题相关的文献,总结归纳全膝关节置换后不放置引流管围术期各方面需综合考虑的要素。结果与结论:①引流管的放置问题关乎全膝关节置换手术的最终结果,与术后出血、血肿、血栓、感染等并发症的发生关系密切;②目前全膝关节置换术后不推荐常规放置引流,但不意味着不需要管理,其实际上对临床医护在围术期各方面的管理提出更高的要求,包括但不限于术前适应证选择、手术操作、止血带使用、术中及术后药物使用、物理疗法的使用等。     

Die Beanspruchung des menschlichen Ellenbogengelenks

Zusammenfassung Bei 80 Objekten werden die Gelenkflächen des menschlichen Ellenbogengelenks untersucht. Die Trochlea und das Capitulum humeri sowie das Caput radii zeigen keine nennenswerten Unterschiede in der Ausdehnung der mit typischem Gelenkknorpel bedeckten Flächen. Dagegen lassen sich für die Ulnazange drei charakteristische Formgruppen abgrenzen: In 3 Fällen kann eine einheitliche Knorpelfläche beobachtet werden. Bei etwa zwei Drittel der untersuchten Objekte liegt im mittleren Bereich der Incisura trochlearis in horizontaler Richtung ein 2–5 mm breiter knorpelfreier Streifen, der den Gelenkknorpel in 2 vollständig getrennte Flächen unterteilt. Das restliche Drittel der Objekte besitzt eine unvollständige Trennung der Gelenkfläche. Unter Berücksichtigung der Vorstellungen von Pauwels über die causale Histogenese der mesenchymalen Stützgewebe sowie der Materialverteilung im Knochengewebe in Abhängigkeit von der einwirkenden Spannungsgröße werden die morphologischen Befunde den für die jeweiligen Skeletelemente von Pauwels ermittelten Spannungsdiagrammen gegenübergestellt. An der Trochlea und dem Capitulum humeri und am Caput radii findet sich eine geradezu ideale Übereinstimmung in der Ausdehnung der Knorpelfläche und der Knochendichte unter den Gelenkflächen mit den entsprechenden Spannungsdiagrammen. An der Ulna trifft dies nur für einen geringen Teil der Objekte zu. Für die unterschiedliche Ausgestaltung der Incisura trochlearis werden zwei mögliche Ursachen diskutiert: 1. die Resultierende R verharre während des Bewegungsablaufes in einzelnen Positionen innerhalb der Incisura trochlearis verschieden lange; 2. der Krümmungsradius der Trochlea humeri sei größer als derjenige im mittleren Bereich der Ulnazange, so daß hier wegen des fehlenden Kontaktes der Gelenkflächen keine Druckübertragung möglich ist.

---

The stress of the human elbow jointI. Functional morphology of the articular surfaces

Summary The articular surfaces of 80 human elbow joints are analysed. The trochlea and capitulum humeri and the caput radii of the investigated individuals show no particular differences in the extent of their surfaces covered with typical articular cartilage. On the other hand the form of the incisura trochlearis is rather variable. Three characteristic formgroups are to be discerned. In three objects a continuous cartilage surface has been observed. In 50 of the investigated joints there is a small intersection free from cartilage in the midst of the incisura trochlearis, dividing the articular cartilage in two isolated surfaces. In the rest of the analysed objects the articular surface is divided only partially. According to Pauwels' hypothesis on the causal histogenesis of the mesenchymal supporting tissues and of the density distribution of the bone dependence upon the magnitude of the local unit stress the morphological findings in the single investigated parts of the elbow joint are confronted with the corresponding stress diagram as described by Pauwels. In the trochlea and capitulum humeri and in the caput radii a nearly ideal correspondence of the extent of the articular surface and the density of the bone tissue with the unit stress diagrams are found. In the ulna this correspondence exists only in few of the analysed objects. For the different form of the incisura trochlearis two possible explanations are discussed: 1, during the motion the resultant of forces may stay for a different time in their single positions in the incisura trochlearis; 2. the curvature radius of the trochlea humeri may be greater than that one of the incisura trochlearis in the central area. So no pressure occurs in this part of the articular surface.

Mit freundlicher Unterstützung durch die Deutsche Forschungsgemeinschaft.