How to Optimize Radiological Images Captured from Digital Cameras, Using the Adobe Photoshop 6.0 Program

Over the past decade, the technology that permits images to be digitized and the reduction in the cost of digital equipment allows quick digital transfer of any conventional radiological film. Images then can be transferred to a personal computer, and several software programs are available that can manipulate their digital appearance. In this article, the fundamentals of digital imaging are discussed, as well as the wide variety of optional adjustments that the Adobe Photoshop 6.0 (Adobe Systems, San Jose, CA) program can offer to present radiological images with satisfactory digital imaging quality.     

New image-processing system for analysis,display and measurement of static and dynamic foot pressures

A new image-processing system, using a video digitiser with an IBM-compatible PC/AT, is developed for acquisition and processing of low-contrast, lowintensity barographic images of both feet for assessment of pressure distribution during standing and walking. Data displays, in the form of centres of pressures, isopressures contours, perspective views of pressures, grey scale image and walking pressure patterns, combined image of walking pressures, paths of centres of pressures and pressure variations with time, are developed. These have provided very useful and early information regarding the internal structural changes in the bones of the foot and sites at risk of ulcer development in leprosy subjects and enable suitable corrective orthopaedic procedures to be adopted. unitl the end of November 1990, and will then return to the Indian Institute of Technology.     

Program for generation of three-dimensional finite element mesh from magnetic resonance imaging scans of human limbs

A PC-AT based program for conversion of magnetic resonance imaging (MRI) scans into coordinate input for finite element mesh generation is presented. The program is written in Borland C + +3.1 and is compatible with every general-use personal computer, permitting the use of MS-DOS 3.0 or higher with a Microsoft mouse. The program is menu driven and does not demand specialised knowledge from the user. The system and memory requirements are minimal -- 640 kB RAM -- and it runs as a stand-alone program. A second program allows the construction of a three-dimensional representation of the limb sub-structure and generation of the FE mesh from the converted cross-sectional scans. The capabilities of the program are demonstrated using cross-sectional scans of the upper arm; the fat, muscle and bone contours were obtained to a very high level of precision (0.4 mm).     

髋臼CT图像轮廓跟踪方法

目的为重建和测量髋臼的解剖结构,需要大量地读取CT图像的信息,以获得髋臼轮廓的坐标值。方法本研究采用直方图阈值图像分割、kirsh边缘提取法获得髋臼的二值化轮廓图像。轮廓坐标的提取应用了“迷宫”边缘跟踪算法。结果本方法可大量、快捷、正确的提取图像轮廓信息。     

基于暗视场荧光图像分析的大鼠微血管流速测量系统的建立

将荧光标记的自身红细胞注入SD大鼠体内,在荧光显微镜下观测标记红细胞在大鼠微血管中的流动情况,并通过显微摄像系统将整个过程以视频信号的形式存贮。使用视频采集卡将流速变化过程回放采样,得到暗视场下的荧光图像。然后利用帧图像分离出奇偶场的图像分析方法测定血流速度。在该系统下测量流动小室中荧光小球的流速,得到的测量值与实际值之间的误差小于7%,两者没明显的差异(P>0.05),流速测量的上限为9.6mm/s。并在大鼠微循环障碍研究中,应用此系统得到了血流速度随时间变化的情况。     

Physics-Driven CFD Modeling of Complex Anatomical Cardiovascular Flows—A TCPC Case Study

Recent developments in medical image acquisition combined with the latest advancements in numerical methods for solving the Navier-Stokes equations have created unprecedented opportunities for developing simple and reliable computational fluid dynamics (CFD) tools for meeting patient-specific surgical planning objectives. However, for CFD to reach its full potential and gain the trust and confidence of medical practitioners, physics-driven numerical modeling is required. This study reports on the experience gained from an ongoing integrated CFD modeling effort aimed at developing an advanced numerical simulation tool capable of accurately predicting flow characteristics in an anatomically correct total cavopulmonary connection (TCPC). An anatomical intra-atrial TCPC model is reconstructed from a stack of magnetic resonance (MR) images acquired in vivo. An exact replica of the computational geometry was built using transparent rapid prototyping. Following the same approach as in earlier studies on idealized models, flow structures, pressure drops, and energy losses were assessed both numerically and experimentally, then compared. Numerical studies were performed with both a first-order accurate commercial software and a recently developed, second-order accurate, in-house flow solver. The commercial CFD model could, with reasonable accuracy, capture global flow quantities of interest such as control volume power losses and pressure drops and time-averaged flow patterns. However, for steady inflow conditions, both flow visualization experiments and particle image velocimetry (PIV) measurements revealed unsteady, complex, and highly 3D flow structures, which could not be captured by this numerical model with the available computational resources and additional modeling efforts that are described. Preliminary time-accurate computations with the in-house flow solver were shown to capture for the first time these complex flow features and yielded solutions in good agreement with the experimental observations. Flow fields obtained were similar for the studied total cardiac output range (1–3 l/min); however hydrodynamic power loss increased dramatically with increasing cardiac output, suggesting significant energy demand at exercise conditions. The simulation of cardiovascular flows poses a formidable challenge to even the most advanced CFD tools currently available. A successful prediction requires a two-pronged, physics-based approach, which integrates high-resolution CFD tools and high-resolution laboratory measurements.     

A survey of different high resolution visualization modes of a volumetric object with applications

Summary In view of the variety of 3D representation techniques, a clinical study was carried out in order to evaluate their respective usefulness. It appears that a single technique cannot be claimed to be valid for all clinical situations and that a combination of representations brings more relevant information. Among the different techniques a clear delineation must be established between those which allow the accurate definition of landmarks (multiplanar reformation, surface representation), and those which do not (integral shading, reconstructed radiology). The main point is the possibility to recognize anatomical landmarks on these latter modes and to choose oblique cut planes in relation to them. Visualization quality is strongly dependent upon the acquisition protocol which must provide a spatial resolution as isotropic as possible.

---

Une revue de différents modes de visualisation en haute résolution d'un objet volumique avec des applications

Résumé Face à la variété des techniques de représentation 3D une étude clinique a été conduite pour évaluer leurs utilités respectives. Il apparait qu'une technique unique ne peut pas convenir à toutes les situations cliniques et qu'une combinaison de différents modes de présentation apporte une information plus pertinente. Parmi les différentes techniques une distinction claire doit être établie entre celles qui autorisent la prise de repères précis (reformatage multiplanaire, représentation de surface), et celles qui ne le permettent pas (ombrage intégral, radiologie reconstruite). Le point principal est la possibilité de reconnaître des repères anatomiques sur ces derniers modes et de choisir des plans de coupe en relation avec eux. La qualité de la visualisation dépend étroitement du protocole d'acquisition qui doit fournir une résolution aussi isotrope que possible.

     

基于自由变形法的多模态医学图像的配准与融合

本研究提出了一种自动识别颈部PET-CT图像特征点的算法，它应用自由变形（FFD）方法以CT图像的特征点为参考使PET图像产生变形，再结合最大互信息法对颈部PET与CT图像进行非刚体配准，最后用改进的小波图像融合法把两者进行融合得出视觉效果比较理想的融合图像。经实际计算得出的变形PET图像与对应CT图像的互信息量大于原始PET图像，并且最后用改进的小波图像融合法得出的融合图像的信息量比一般小波融合大，由此证明本研究所用方法是有效的。     

Methodology used for "software for automated linkage in Italy" (SALI)

Linkage of epidemiological registries can provide cost-effective information on the associations between different diseases or exposures in the population under study and on completeness of surveillance system databases. We describe the program SALI (software for automated linkage in Italy) aimed at matching individual records from medium-sized registries (in the order of 100,000 records), where the desired outcome is to miss as few links as possible and, because of low link-likelihood (< 1%), a manual revision of matched pairs is feasible. SALI, developed in CA-Clipper language, uses registry files in dBase format. It requires only name, surname, and date of birth as key fields, and it allows for spelling errors in Italian or other Latin languages through a specific algorithm. Furthermore, a double-blind procedure ensures data confidentiality. The main linkage procedure is based on four stages, two automatic ones, and two where the operator can decide through specific windows whether to accept stage-selected matches. SALI takes into account possible errors in key fields thus reducing false negatives. It was used to solve the problem of linkage between AIDS and cancer registries in Italy. It can be used with every IBM-compatible computer system, assuring uniquely high portability.     

Oracle基于Server的性能调整

本文主要从四个方面,通过探讨和研究Oracle数据库服务器的特点与原理,阐述了如何提高、调整Oracle数据库服务器性能的一些原则和方法。