How to Tailor Structural Colors for Extended Visibility and White Light Generation Employing Direct Laser Interference Patterning

The appearance of a surface can be controlled by creating periodic microstructures designed to diffract light and produce structural colors. Nevertheless, since structural coloration is based on diffraction, the produced colors have a strong dependence on the viewing angle and absence of coloration takes place while tilting the samples. In this work direct laser interference patterning is used to firstly provide transparent polymer sheets a structural coloration with a high‐range observation angle, and secondly to demonstrate the combination of structural colors, producing a white coloring effect. The employed approaches are based on the fabrication of micro‐gratings with multiple periods in the same structured area and on the engineering of the diffraction orders of the diffraction spectrum. The patterned surfaces are characterized by confocal microscopy and angular spectrometry in reflection mode. The morphological characterization shows homogeneous surface patterns, while the spectral results demonstrate that combining four spatial periods on a single patterned surface, a white appearance is obtained over an angular observation range higher than 30°. The experimental results are supported by theoretical predictions by means of generalized formulas based on the diffraction of light.     

Black-fly assemblage distribution patterns in streams in disturbed areas in southern Brazil

Black flies (Simuliidae) are considered to be pests in rural and in some urban areas in the south of Brazil due to the bites of females. Little information exists on the factors that contribute to Simuliidae distribution in these areas. We sampled 39 streams in the state of Rio Grande do Sul in September 2004 to address ecological aspects. Of the 18 species collected, those that occurred in more than 50% of the streams were: Simulium subnigrum Lutz 1910, Simulium pertinax Kollar 1882, Simulium subpallidum Lutz 1910 and Simulium incrustatum Lutz 1910. Species richness was not influenced by any of the environmental or geographical variables considered, and there was no pattern of species co-occurrence, corroborating the hypothesis of a stochastic distribution of the Simuliidae assemblage. When analyzed individually, only three of seven species with occurrence frequency >30% were related to any of the variables measured. The probabilities of occurrence of Simulium jujuyense Paterson & Shannon 1927 and S. pertinax were higher in streams with high values of water pH and electrical conductivity, whereas the opposite was observed for S. incrustatum. Therefore, due to stochastic distribution, the population studies of Simuliidae are more suitable for predicting the occurrence of species in rural areas than are studies of assemblages.     

Innovation in Chemistry,Manufacturing, and Controls—A Regulatory Perspective From Industry

This review describes the landscape of novel modalities such as cell and gene therapies, viruses, other novel biologics, oligomers, and emerging technologies, including modern analytics. We summarize the regulatory history and recent landmark developments in some major markets and examine specific chemistry, manufacturing, and controls (CMC) challenges, including suggestions for exploration of potential science-based approaches in support of regulatory strategy development from an industry perspective. In addition, we evaluate the economic factors contributing to patient access to innovation and discuss the impact of regulation. There is a desperate need for a consistent form of regulation where global approaches to regulatory strategies can be harmonized, and specific CMC challenges can be dealt with using the appropriate science and risk-based tools. Although these tools are well described in current guidance documents, the specifics of applicability to complex novel modalities can still result in differing regulatory advice and outcomes. The future goals for efficiently regulating innovative modalities and technologies could be aided by more regulatory harmonization, regulatory education, and industry cooperation through consortia, enabling industry to supply key information to regulators in a transparent yet well-defined manner, and utilizing mutually understood risk-benefit analyses to produce drugs with appropriate safety, efficacy, and quality characteristics.     

从结构相似模型化合物进行天然产物结构鉴定-以番石榴叶黄酮苷类化合物鉴定为例

天然产物的结构鉴定主流手段是核磁共振波谱法,与结构相似模型化合物的核磁数据进行比较,确定未知化合物结构是一种重要的方式。论文从结构鉴定过程中有机分子可分拆解析,如何寻找相似模型化合物和实例例举3个方面,探讨相似模型化合物对于未知图谱结构鉴定的作用和意义,并建议在平时的结构分析过程中注重模型化合物数据的收集和积累。     

2014年上半年国内22城市（地区）样本医院用药分析

本文分析了国内22城市（地区）样本医院用药数据，发现，近三年样本医院购入药品总金额增幅继续保持在12％左右，整个医院市场趋于平稳；抗感染药物目前己进入常态化管理，已从负增长的困境中走出，该大类药物在样本医院中所占份额不容忽视；供应医院领先厂商中进口、合资企业较本土企业稍占优势，提示，二三级医院对药品的临床使用效果或药品的来源及质量相当重视。     

Occurrence,detection and ecotoxicity studies of selected pharmaceuticals in aqueous ecosystems- a systematic appraisal

Pharmaceutical compounds (PCs) have globally emerged as a significant group of environmental contaminants due to the constant detection of their residues in the environment. The main scope of this review is to fill the void of information on the knowledge on the African occurrence of selected PCs in environmental matrices in comparison with those outside Africa and their respective toxic actions on both aquatic and non-aquatic biota through ecotoxicity bioassays. To achieve this objective, the study focused on commonly used and detected pharmaceutical drugs (residues). Based on the conducted literature survey, Africa has the highest levels of ciprofloxacin, sulfamethoxazole, lamivudine, acetaminophen, and diclofenac while Europe has the lowest of all these PC residues in her physical environments. For ecotoxicity bioassays, the few data available are mostly on individual groups of pharmaceuticals whereas there is sparsely available data on their combined forms.     

Impact of ultra-low dose CT acquisition on semi-automated RECIST tool in the evaluation of malignant focal liver lesions

PurposeTo compare the evaluation of malignant focal liver lesions (FLLs) using a semi-automated RECIST tool with a standard and an ultra-low dose (ULD) computed tomography (CT) protocol.Materials and methodsThirty-four patients with malignant FLLs underwent two abdominal-pelvic CT examinations one using a standard protocol and one using an ULD protocol. There were 23 men and 11 women with a mean age 64.3 ± 14.4 (SD) years (range: 22–91 years). Dosimetric indicators were recorded, and effective dose was calculated for both examinations. Mean malignant FLL attenuation, image noise and contrast-to-noise-ratio (CNR) were compared. The largest malignant FLL per patient was evaluated using the semi-automated RECIST tool to determine longest axis length, longest orthogonal axis length, volume and World Health Organisation area.ResultsDosimetric values were significantly reduced by −56% with ULD compared to standard protocol. No differences in mean malignant FLL attenuation values were found between the two protocols. Image noise was significantly increased for all locations (P < 0.05) with ULD compared to standard protocol, and CNR was significantly reduced (P < 0.05). On the 34 malignant FLLs analyzed, six semi-automated shapes non-concordant with radiologist's visual impression were highlighted with the software, including one FLL (1/34; 3%) with standard CT acquisition only, three FLLs (3/34; 9%) with ULD CT acquisition only and two FLLs (2/34; 6%) with both CT acquisitions. After manual editing, the concordance of the values of the studied criteria between both acquisitions was good and no significant difference was reported.ConclusionSemi-automated RECIST tool demonstrates good performances using ULD CT protocol. It could be used in routine clinical practice with a ULD protocol for follow-up studies in patients with known malignant FLL.     

Survival after transfusion in the Netherlands

Background Cost‐effectiveness analyses of blood safety interventions require estimates of the life expectancy after blood product transfusion. These are best derived from survival after blood transfusion, per age group and blood component type. Study design and methods In the PROTON (PROfiles of TransfusiON recipients) study transfusion recipient data was collected from a hospital sample covering 28% of the total blood use between 1996 and 2006 in the Netherlands. The dataset includes date of transfusion, blood component type transfused and recipient identification details. PROTON data were individually matched to mortality data of the Netherlands. Survival after first transfusion and after any transfusion was calculated, per blood component type and age group. PROTON mortality rates were compared to mortality rates in the general population. The results were used to estimate survival beyond the study period and to estimate life expectancy after transfusion. Results Of all 2 405 012 blood product transfusions in the PROTON dataset, 92% was matched to the national Dutch Municipal Population Register, which registers all deaths. After 1 year, survival after any transfusion was 65·4%, 70·4% and 53·9% for RBC, FFP and PLT respectively. After 5 years, this was 46·6%, 58·8% and 39·3% for RBC, FFP and PLT, respectively. Ten years after transfusion, mortality rates of recipients are still elevated in comparison with the general population. Conclusion Mortality rates of transfusion recipients are higher than those of the general population, but the increase diminishes over time. The mortality rates found for the Netherlands are lower than those found in comparable studies for other countries.     

Investigation of Solid Dosage Form Components Interaction Using Orthogonal Techniques- Discovery of New Forms of Sodium Stearyl Fumarate

Physical or chemical interactions between drug product (DP) components can occur during manufacturing and/or upon storage; and may alter DP shelf life and performance. In this work a new Powder X-ray Diffraction (PXRD) peak was observed in DP under accelerated storage conditions. Due to the complex drug product matrix (including API, polymer, fillers, super disintegrant and lubricant), it was challenging to pinpoint the component(s) responsible for the new peak. In addition to PXRD, other orthogonal techniques including Differential Scanning Calorimetry (DSC), thermogravimetric analysis (TGA), dynamic vapor sorption (DVS), Solid State Nuclear Magnetic Resonance (SSNMR) and Infrared (IR) spectroscopy were employed in this investigation to understand the root cause mechanistically. Specifically, multi nuclei SSNMR (¹H, ²³Na, ¹³C) was instrumental in delineating the components of the matrix. We identified the root cause to be an acid base reaction occurring in the DP, whereby sodium ion in sodium stearyl fumarate (SSF) is replaced by proton leading to SSF form conversion. We also identified commercially available SSF to be a hydrate that can dehydrate to an anhydrous form upon heating. In general, the same techniques can be used to investigate interactions of any multi component solid dosage forms.