6～7岁儿童第一恒磨牙窝沟封闭防龋效果观察

目的:了解窝沟封闭剂预防龋齿的临床效果。方法:将4 6 7例儿童的第一恒磨牙分为两组,一侧第一恒磨牙进行光固化窝沟封闭,为实验组;另侧同名牙不做封闭,为对照组。进行1～3年的随访观察。结果:封闭了93 4颗牙,3年复查后的封闭剂保留率76. 0 5 % ,龋齿降低率92. 6 5 %。结论:窝沟封闭能有效地预防窝沟龋的发生,是目前预防窝沟龋的较好方法之一     

Spatially disaggregated disease transmission risk: land cover, land use and risk of dengue transmission on the island of Oahu

Vector-borne diseases persist in transmission systems that usually comprise heterogeneously distributed vectors and hosts leading to a highly heterogeneous case distribution. In this study, we build on principles of classical mathematical epidemiology to investigate spatial heterogeneity of disease risk for vector-borne diseases. Land cover delineates habitat suitability for vectors, and land use determines the spatial distribution of humans. We focus on the risk of exposure for dengue transmission on the Hawaiian island of Oahu, where the vector Aedes albopictus is well established and areas of dense human population exist. In Hawai'i, dengue virus is generally absent, but occasionally flares up when introduced. It is therefore relevant to investigate risk, but difficult to do based on disease incidence data. Based on publicly available data (land cover, land use, census data, surveillance mosquito trapping), we map the spatial distribution of vectors and human hosts and finally overlay them to produce a vector-to-host ratio map. The resulting high-resolution maps indicate a high spatial variability in vector-to-host ratio suggesting that risk of exposure is spatially heterogeneous and varies according to land cover and land use.     

Feasibility of a closed‐system cell processor (ACP215) for automated preparation of washed platelet concentrates

Background and Objectives This study was aimed at evaluating the feasibility of the ACP215 closed‐system cell processor for preparing washed platelet concentrates. Material and Methods Platelet washing was performed with either the ACP215 system or the manual technique with M‐sol. Plasma protein removal and platelet recovery were estimated, and the washed platelet concentrates were stored for 5 days. Samples were collected after washing and on days 1, 3 and 5 of storage to determine the effects of the washing methods on the in vitro platelet qualities (platelet count, platelet volume, pH, glucose and lactate concentrations, hypotonic shock response, aggregation response and CD62P expression level). Results Platelet recovery was 86·9 ± 2·1% and 85·9 ± 1·9% (P = 0·305), and plasma protein removal was 95·8 ± 0·9% and 96·9 ± 0·7% (P = 0·016) after washing with the ACP215 system and manual technique, respectively. No statistically significant differences in the in vitro platelet qualities were observed between the washing methods. Conclusion The ACP215 system is a feasible alternative to manual, labour‐intensive, techniques for preparing washed platelet concentrates.     

Hydrogen Production by Steam Reforming of Ethanol over Nickel Catalysts Supported on Sol Gel Made Alumina: Influence of Calcination Temperature on Supports

Selecting a proper support in the catalyst system plays an important role in hydrogen production via ethanol steam reforming. In this study, sol gel made alumina supports prepared for nickel (Ni) catalysts were calcined at different temperatures. A series of (Ni/Al_S.G.) catalysts were synthesized by an impregnation procedure. The influence of varying the calcination temperature of the sol gel made supports on catalyst activity was tested in ethanol reforming reaction. The characteristics of the sol gel alumina supports and Ni catalysts were affected by the calcination temperature of the supports. The structure of the sol gel made alumina supports was transformed in the order of γ → (γ + θ) → θ-alumina as the calcination temperature of the supports increased from 600 °C to 1000 °C. Both hydrogen yield and ethanol conversion presented a volcano-shaped behavior with maximum values of 4.3 mol/mol ethanol fed and 99.5%, respectively. The optimum values were exhibited over Ni/Al_S.G800 (Ni catalyst supported on sol gel made alumina calcined at 800 °C). The high performance of the Ni/Al_S.G800 catalyst may be attributed to the strong interaction of Ni species and sol gel made alumina which lead to high nickel dispersion and small particle size.     

Study on the Influence of Nanosilica Sol on the Hydration Process of Different Kinds of Cement and Mortar Properties

Compared with nanosilica collected in a gaseous state, nanosilica sol has great economic value and application significance for improving the performance of concrete and mortar. In this study, the influence of nanosilica sol on the hydration process of different kinds of cement is studied by means of hydration heat analysis, X-ray diffraction analysis (XRD) and other methods, and the properties of mortar such as setting time, mechanical properties and porosity are also studied to characterize the influence of nanosilica sol on the macroscopic properties of mortar. The experimental results show that nanosilica sol can accelerate the hydration rate of two kinds of cement and promote the hydration reaction degree of cement, and this promotion effect increases with the increase in nanosilica sol content. At the same time, nanosilica sol can significantly shorten the setting time of the two kinds of cement, and it is more obvious with the increase in content. Excessive content of nanosilica sol will adversely affect the permeability resistance of mortar. It may be caused by the weak interval formed by nanosilica particle clusters in the mortar matrix, which can be supported by the mortar pore structure distribution test. At the same time, the influence of nanosilica sol on the hydration of the two kinds of cement is different, and the compressive strength of HBSAC cement mortar increases first and then decreases after adding nanosilica sol; However, the compressive strength of P·O 42.5 cement mortar increases gradually after adding nanometer silica sol. This shows that nanosilica sol does not effectively promote the hydration of β-C2S in high belite sulfoaluminate cement (HBSAC) mortar. Based on the above experimental results, it can be concluded that when the content of nanosilica sol is about 1%, it has the best promotion effect on the hydration of the two kinds of cement and the performance of mortar.     

Macromolecule Crosslinking and Scission Yield Determination from Sol‐Gel Analysis Using a Log–Log Scale Method

Sol‐gel analysis is known as a convenient method to evaluate macromolecule crosslinking efficiency. Quantitative results can be obtained by plotting the logarithm of the sol fraction (s) vs. the logarithm of the crosslinking index (CI). The gel‐point value is determined as the intersection with the horizontal line at log  (sol) = 0, and the sciss/cross ratio is determined from the slope of the plot. The number of crosslinks per initial macromolecule at the gel‐point is pre‐known as a function of the polydispersity index and the sciss/cross ratio, and from this both crosslinking and scission yields are calculated. This report contains graphs needed for the determination of crosslinking efficiency for narrow (M̄_w/M̄_n = 1.5) and broad (M̄_w/M̄_n = 5) molecular weight distributions. An example of radiation crosslinking of low‐density poylethylene is also presented.     

Tuning of Sol–Gel Transition in the Mixed Polymer Micelle Solutions of Copolymer Mixtures Consisting of Enantiomeric Diblock and Triblock Copolymers of Polylactide and Poly(ethylene glycol)

Poly(ethylene glycol) (PEG) is partially furanylated with different feed ratios of furfuryl isocyanate and used as the macro initiator of ring‐opening polymerization of l ‐ and d ‐lactides to synthesize copolymer mixtures of furan‐terminated AB diblock and ABA triblock copolymers (poly(oxyethylene)–poly(l ‐lactide)/poly(l ‐lactide)–poly(oxyethylene)–poly(l ‐lactide) and poly(oxyethylene–poly(d ‐lactide)/poly(d ‐lactide)–poly(oxyethylene)–poly‐(d ‐lactide)) having different diblock/triblock ratios. The mixed micelle solutions of these enantiomeric copolymer mixtures undergo sol‐to‐gel or gel‐to‐sol transition depending on the diblock/triblock ratio of the copolymer mixtures. The rheological properties of the mixed micelle solutions could also be controlled by changing the diblock/triblock ratios or the initial furanylation ratio of PEG.

     

Mn3O4修饰阳极微生物燃料电池的产电性能

采用超声分散法和溶胶浸渍法制备了Mn₃O₄修饰电极,在微生物燃料电池(MFC)中,研究了不同方法修饰的Mn₃O₄阳极对MFC产电能力的影响。实验结果表明:超声分散法制备的Mn₃O₄作为阳极,MFC最大功率密度为0.172W/m²,相比对照组降低了22%;产电菌在电极表面的电子传递受到了抑制。溶胶浸渍法制备的Mn₃O₄作为阳极,MFC最大功率密度则为0.431W/m²,相比对照组增加了93%;MFC的电荷转移内阻降低了67%,并具有赝电容特性。     

An Injectable ROS‐Responsive Self‐Healing Hydrogel Based on tetra‐poly(ethylene glycol)‐b‐oligo(l‐methionine)

Abnormal physiological conditions provide an ideal stimulus for the design of responsive hydrogels which function as controlled and site‐specific release of drugs. Here, an injectable reactive oxygen species (ROS) responsive self‐healing hydrogel based on tetra‐poly(ethylene glycol)‐b‐oligo (l ‐methionine) (t‐PEG₅₆‐b‐OMeth_n) synthesized by a novel and facile method is reported. The hydrophobic interactions between the side chains of l ‐methionine make the polymer chains crosslinked and lead to the formation of hydrogels which can be injected and self‐healed, meanwhile, the cross‐linker also provides a hydrophobic domain to encapsulate Dox. In presence of ROS, the side chain of l ‐methionine can be oxidized to methionine sulfoxide. The side chain of l ‐methionine is changed accordingly from hydrophobic to hydrophilic. As a result, both the hydrophobic domain and the hydrogel itself are destroyed. The controlled release of Dox by ROS at site‐specific is realized. The excellent biocompatibility of hydrogel based on t‐PEG₅₆‐b‐OMeth_n indicates the door of the potential application in controlled release of drug in a truly physiological environment.