A Fluorescent Tracer Based on Castor Oil for Monitoring the Mass Transfer of Fatliquoring Agent in Leather

Fatliquoring is one of the most important processes in leather making, in which the collagen fibers are split effectively, while the crust acquires a good softness and mechanical strength. The effectiveness of fatliquoring depends not only on the variety and dosage of fatliquoring agent but also on its distribution in hierarchical collagen fiber layers. Up to now, the research about the mass transfer of fatliquoring agent in leather is very limited because quantifying the distribution of invisible fatliquor in leather is very difficult. In this paper, a fluorescent tracing technique based on modified castor oil was established and send used to investigate the mass transfer of fatliquor in leather. The crucial fluorescent tracer was synthesized favorably by the reaction of castor oil, successively with maleic anhydride and 5-aminofluorescein, which was confirmed by FTIR, ¹H NMR and DSC. The fluorescent tracer was pH-sensitive and emitted an intense fluorescent signal at pH 8–10. Then, it was applied to monitor the fatliquoring process in real-time. Compared with Sudan IV or Nile Blue sulphate dyeing tests, this fluorescent tracing technique could conveniently visualize and quantify the penetration and distribution of fatliquor in leather process.     

Combination therapy of tacrolimus,high doses of glucocorticosteroids,and cyclophosphamide against existing historical treatment for patients in severe conditions of interstitial lung diseases complicated with dermatomyositis: A retrospective analysis

The high-dose glucocorticosteroid (GC) treatment is the first choice for dermatomyositis complicated with interstitial lung disease (DM-ILD) but patients are resistant to the high-dose GC monotherapy. Besides, the high dose of GC, the secondary immunosuppressive agent(s) is necessary but there is controversy for the selection of immunosuppressive agent(s). The objectives of the study were to analyze the efficacy of different therapeutic options for DM-ILD to identify the optimal therapy. A total of 60 patients had received intravenous 1.0–2.0 mg/ kg/day prednisolone for DM-ILD. In severe conditions, patients had received oral 1 to 3 mg/day tacrolimus (TAC), 500 mg/ m²/month cyclophosphamide (CY), and/or 1 g/ day methylprednisolone pulse (TI cohort, n = 24). In severe conditions, patients had received 1 g/day methylprednisolone pulse and 2–3 mg/ kg/day cyclosporine A (CsA) and/or 500 mg/ m²/month CY (existing historical treatment; CT cohort, n = 36). Patients of the TI cohort did not receive CsA. Patients in the CT cohort were received CY in significantly fewer numbers than those of the TI cohort during treatment (P = .0112). A total of 11 (46%) patients from the TI cohort and 14 (39%) patients from the CT cohort were developed relapsed. At the end of the 30-months, higher numbers of patients of the TI cohort had an event(s) free survival than those of the CT cohort (7 (29%) vs 2 (6%), P = .0229). Also, higher numbers of patients of the TI cohort had survived irrespective of an event(s) than those of the CT cohort (21 (87%) vs 22 (61%), P = .0399). Patients of the TI cohort had developed herpes zoster (2 (8%)) and cytomegalovirus (4 (17%)) infections. Patients of the CT cohort developed renal dysfunction (10 (28%)). Hyperglycemia, hyperlipidemia, and fracture (GC-related toxicities) were also reported in both cohorts and these toxicities were fever in the TI cohort. The addition of TAC to high doses GC with CY is an ideal treatment for severe conditions of DM-ILD (Level of Evidence: III; Technical Efficacy Stage: 4).     

Numerical Simulation and Process Optimization on Hot Twist-Stretch Straightening of Ti-6Al-4V Alloy Profile

Ti-6Al-4V profiles prepared by hot extrusion are usually accompanied by bending and twisting. The hot twist-stretch straightening is an effective strategy such that the bending deflection and twisting angle can be simultaneously decreased by a single straightening process. In addition, utilizing stress relaxation effect, the residual stress and springback can be greatly reduced by holding the straightening temperature and strain constant for a period after twist-stretch straightening. In this study, the hot deformation behaviors of the Ti-6Al-4V profile were revealed by experiments. The tensile model was obtained by uniaxial tensile tests within ranges of temperatures (500–700 °C) and strain rates (5 × 10⁻⁵–1 × 10⁻³ s⁻¹). The creep constitutive model was acquired with stress relaxation experiments in ranges of temperatures (500–700 °C) and pre-strain of 1.5%. Then, the coupled thermo-mechanical model of hot twist-stretch straightening was established. Based on orthogonal experiment strategy, the effects of straightening temperature, stretch strain, and holding time on the bending deflection and torsion angle of profile were investigated systematically and the process was optimized. The straightening accuracy is significantly affected by straightening temperature and holding time. By using optimized process parameters in practical straightening experiments, the deflection/length and angle/length after straightening does not exceed 2‰ and 2.5‰°/mm, respectively, which is basically consistent with the numerical simulation result.     

Development of computerized masticatory force measurement system

Purpose: The aim of this study was to assess the Maximum Voluntary Bite Force (MVBF) in Indian population with normal occlusion and after treatment of mandibular angle fracture.

Materials and methods: This paper discusses the development of a sensor fork with modified load cell and computer-based bite force measuring system that generates force profile on the computer. This is a powerful diagnostic tool in response to the needs of dentists seeking an accurate way to dynamically measure occlusion.

Results: This study was carried out to evaluate the maximum voluntary bite force generated by the patients after the treatment of mandibular angle fracture. The in vivo measurements were repeated on the following day, week and two months later. The measurements of the device were highly repeatable.

Conclusion: This development provides the cost effective and handy equipment for bite force measurement further, if again sensor thickness reduced, we will be able to get more close results of forces that are exactly generated during the mastication process. Our study shows a significant difference in mean bite force efficiency between the all the treatment weeks and increased with time at α?=?0.05 level. The gender difference was statistically significant in the male and female.     

Artificial Weathering of Contact-Charred Wood—The Effect of Modification Duration,Wood Species and Material Density

A relevant issue with charred exteriors is the inconsistency of the result, which makes service life predictions complicated. Contact charring enables the creation of a very evenly modified surface with accurate control of temperature and modification time, but the weathering properties are questionable. This paper evaluated the effect of the modification time relative to char layer and transition zone thickness, wood species and material density in an artificial weathering test. The results revealed higher color stability in connection to longer modification time, but also an increase in the cracked surface area. Cracking was heavily dependent on the modification regime and increased with increasing char and transition zone thicknesses. Dense spruce had the highest color stability with the most severe modification regime, but char layer thickness varied more than on other wood types. Furthermore, species-dependent cracking patterns affected the final result as the small-scale flaking experienced by birch increased the washing off of char. It is likely an even higher modification temperature with a shorter modification time is needed to produce sufficient weathering resistance suitable for exterior uses.     

Vitamin D Status among Women in a Rural District of Nepal: Determinants and Association with Metabolic Profile—A Population-Based Study

Hypovitaminosis D is prevalent worldwide, and especially in South-Asia. According to the Institute of Medicine (IOM), 25(OH)D levels below 30 nmol/L are defined as vitamin D deficiency (VDD) and levels between 30–50 nmol/L as insufficiency (VDI). Besides its role in calcium homeostasis, it has been postulated that vitamin D is involved in metabolic syndrome. Given the scarcity of data on vitamin D status in Nepal, we aimed to examine the prevalence of VDD and VDI, as well as the determinants and association with metabolic parameters (lipids, HbA1c), in a cohort of women in rural Nepal. Altogether, 733 women 48.5 ± 11.7 years of age were included. VDD and VDI were observed in 6.3 and 42.4% of the participants, respectively, and the prevalence increased by age. Women reporting intake of milk and eggs > 2 times weekly had higher 25(OH)D levels than those reporting intake < 2 times weekly. Women with vitamin D levels < 50 nmol/L displayed higher levels of cholesterol, LDL-cholesterol, triglycerides, and HbA1c. Additionally, a regression analysis showed a significant association between hypovitaminosis D, dyslipidemia, and HbA1c elevation. In conclusion, VDI was prevalent and increased with age. Milk and egg intake > 2 times weekly seemed to decrease the risk of VDI. Moreover, hypovitaminosis D was associated with an adverse metabolic profile.     

国有医疗机构的产权特征、存在问题与改革

该应用现代产权经济学理论，结合医疗服务市场的特点，分析国有医疗机构的产权特征和存在问题，并探讨其改革思路。     

Amorphization and modified release of ibuprofen by post-synthetic and solvent-free loading into tailored silica aerogels

Promising active pharmaceutical ingredients (APIs) often exhibit poor aqueous solubility and thus a low bioavailability that substantially limits their pharmaceutical application. Hence, efficient formulations are required for an effective translation into highly efficient drug products. One strategy is the preservation of an amorphous state of the API within a carrier matrix, which leads to enhanced dissolution. In this work, mesoporous silica aerogels (SA) were utilized as a carrier matrix for the amorphization of the poorly water-soluble model drug ibuprofen. Loading of tailored SA was performed post-synthetically and solvent-free, either by co-milling or via the melting method. Thorough analyses of these processes demonstrated the influence of macrostructural changes during the drying and grinding process on the microstructural properties of the SA. Furthermore, interfacial SA-drug interaction properties were selectively tuned by attaching terminal hydrophilic amino- or hydrophobic methyl groups to the surface of the gel. We demonstrate that not only the chemical surface properties of the SA, but also formulation-related parameters, such as the carrier-to-drug ratio, as well as process-related parameters, such as the drug loading method, decisively influence the ibuprofen adsorption efficiency. In addition, the drug-loaded SA formulations exhibited a remarkable physical stability over a period of 6 months. Furthermore, the release behavior is shown to change considerably with different surface properties of the SA matrix. Hence, the reported results demonstrate that utilizing specifically processed and modified SA offers a compelling technique for enhancement of the bioavailability of poorly-water soluble APIs and a versatile adjustment of their release profile.