后十字韧带重建后移植物组织学与胶原表型的变化

目的探讨采用半腱肌腱重建后十字韧带（posterior cruciate ligament,PCL）后移植物的组织学与胶原表型的变化.方法取20只成年新西兰大白兔,实验组18只切除右膝PCL后即刻用双股自体半腱肌腱重建,实验组于术后3、6、52周各处死动物2只,12、26周各处死动物6只,切取半腱肌腱移植物;对照组2只直接切取半腱肌腱和PCL.标本采用HE、甲苯胺蓝以及Ⅰ、Ⅲ型胶原免疫组化染色观察移植物的组织学与胶原表型变化,并与正常半腱肌腱和PCL进行比较.结果常规组织化学染色显示正常半腱肌腱和PCL在细胞构成上有明显的差别,PCL内可见软骨样细胞;重建后的移植物经过坏死、细胞重新长入、胶原形成和重塑阶段,52周时形成的结构类似于正常PCL,但在纤维排列上与正常PCL仍有差异.免疫组织化学染色结果显示正常PCL纤维内部仅有Ⅰ型胶原表达,重建韧带Ⅰ型胶原染色随时间延长从少到多,Ⅲ型胶原染色从多到少,52周时移植物内局部仍有表达.结论采用半腱肌腱重建PCL 52周时移植物和正常PCL结构相似,但仍有差异.     

三维骨建模在全膝关节置换术中韧带平衡的作用

目的探讨以三维骨建模为基础、无需影像的计算机辅助系统在人工全膝关节置换术(totalknee arthroplasty,TKA)中韧带平衡的作用。方法2002年11月～2003年6月,采用后稳定型人工全膝关节,在Ceravision无需影像资料的三维骨建模系统导航监控下,辅助完成TKA21例。男5例,女16例,年龄64～79岁,平均72.4岁。其中2例既往行胫骨近端截骨术,1例行股骨远端截骨术。14例膝内翻,7例膝外翻。术前下肢全长X线正位片测量,内翻13°～外翻13°,平均2.36°;膝关节X线正位片测量,应力下内翻平均8.47°(内翻2°～内翻20°),应力下外翻平均3.63°(内翻7°～外翻12°)。结果术中导航系统测量,额面内翻12°～外翻10°,平均3.33°,与术前比较差异有统计学意义(P<0.05);额面应力下内翻平均6.47°(内翻0°～内翻24°),应力下外翻平均4.32°(内翻8°～外翻15°),与术前比较差异有统计学意义(P<0.05)。术毕导航系统测得膝内外翻平均0.175°(内翻2°～外翻3°),而术后下肢全长X线正位片测量平均0.3°(内翻3.5°～外翻1.5°),二者差异无统计学意义(P>0.05)。术后3个月关节活动度为105～130°,平均115°,膝关节额面松弛度0.2～0.5cm,平均0.27cm。人工膝关节胫、股骨假体取得满意的对位置入和韧带平衡,无关节失稳和髌骨脱位等并发症发生。结论以三维骨建模为基础、无需影像的Ceravision系统,具有三维立体定位、优化截骨,并通过旋转对位和韧带松解获得伸屈膝关节等距间隙与韧带平衡稳定的作用,近期临床疗效满意,可在TKA中常规使用。     

X-Ray Study of the Cat Hindlimb During Treadmill Locomotion

With pulsed X-ray cinematography we have analysed the angular excursions of the distal hindlimb joints (proximal interphalangeal, PIP; metatarsophalangeal, MTP; ankle) in cats walking on a treadmill. These distal joints transmit the body weight and the dynamic forces onto the ground. We have included the knee and hip joints in the analysis to relate the angular excursions of the proximal and distal joints and to verify the data previously obtained with external markers on the kinematics of the proximal joints. At the beginning of the stance phase the PIP joints flexed rapidly, the MTP joints extended slowly and the ankle and knee yielded under body weight. Whereas the PIP joints maintained a rather constant angular position of −75° throughout the stance phase, extension continued in the MTP joints from −230° at touch-down to −270° at the end of the stance phase. Around 50 ms before lift-off the MTP joints flexed rapidly. Early (−30 ms) after lift-off this flexion changed into a slow extension. The PIP joints extended swiftly at the stance-swing transition and moderately at the end of the swing phase. During the middle part of the swing phase they flexed slowly. Small rotatory movements around the long axis of the foot took place in the last 100 ms of the swing phase. The results of this study on the distal joints are discussed in relation to the placing of the paw, to the translation of forward propulsion into a MTP movement and to the lifting of the paw (conventionally described as toe curling). They show a differentiated mechanical interaction between the different distal limb joints during these different phases, which must be known in detail to interpret the corresponding electromyographic data and to understand how the hip is moved forward over the MTP joints which serve as the final pivot during stance.     

Effects of capsaicin in temporomandibular joint arthritis in rats

Temporomandibular joint (TMJ) arthritis was induced in female Lewis rats by unilateral injection of a suspension of heat-killed Mycobacterium butyricum in paraffin oil into the TMJ. Control rats received paraffin oil by the same route. Arthritic and control rats were pretreated either with capsaicin or denervation of the mandibular branch of the trigeminal nerve. Tissues were collected for neuropeptide extraction and analysed by radioimmunoassay and reverse-phase high-performance liquid chromatography. In all groups, the levels of substance P- (SP), calcitonin gene-related peptide- (CGRP) and neuropeptide Y- (NPY) like immunoreactivity (LI) were higher in the trigeminal ganglia than in the TMJs. In control rats, capsaicin significantly lowered the levels of SP-LI in the trigeminal ganglia and TMJ, but not CGRP-LI and NPY-LI. In the arthritic rats, capsaicin pretreatment significantly lowered the SP-LI and CGRP-LI in the trigeminal ganglia and TMJ, but not the NPY-LI. In the trigeminal ganglia the unilateral denervation significantly lowered SP-LI in control rats, and in arthritic rats SP-LI and CGRP-LI. On the denervated side of the arthritic TMJ, NPY-LI, SP-LI and CGRP- LI were significantly lowered as compared to the arthritic control rats and to the contralateral side. In this rat model, pretreatment with capsaicin and surgical denervation decreased the neuropeptide content in the trigeminal ganglia and the TMJ. The results clearly demonstrate a close interaction between increased neuropeptide release from sensory and sympathetic neurones after induction of arthritis in the rat.     

寰枢椎侧块关节运动轨迹数学模型的探讨

应用最小二乘法拟合得到寰枢椎侧块关节运动轨迹方程 ,左半部是 :S(x) =-2 3 .2 42 9-8.663 1x-0 .45 91x2 ;右半部是 :S(x) =-19.683 8+ 7.15 5 4x-0 .3 5 2 6x2 。     

膝关节镜下膝后侧腔室联合手术入路的探讨

[目的]探讨在关节镜下膝关节后侧腔室联合手术入路的重要性和可操作性。[方法]经过前内侧、前外侧和股骨髁切迹以及后内侧、后外侧和后纵隔内切口联合入路分别入镜、入器械，进行膝关节后侧腔室的探查和手术操作。[结果]216例（239膝）应用联合入路探查和治疗，其中5例膝因关节僵硬操作失败；175例膝用于治疗后侧腔室疾病，膝关节后侧腔室手术视野显著改善，探查和手术操作完善，均达到手术目的。1例膝内侧隐神经不全损伤，没有腘后神经、腓总神经、腘后血管、交叉韧带等重要组织损伤。[结论]膝关节后侧腔室病变较多，是检查和治疗的重要部位，并非“技术盲区”。这种联合手术入路，手术风险低，具备可操作性，可以提高手术效率和质量，可作为膝关节镜下常规手术入路。     

旋转铰链型与单纯铰链型膝关节肿瘤假体置换的临床比较研究

目的 研究膝关节肿瘤保肢手术两种假体置换的术后效果及其比较.方法 随访我院1999年6月2006年3月治疗的72例膝关节肿瘤患者，失访9例，余63例中40例采用单纯铰链型假体置换(A组)，23例采用旋转铰链型假体置换（B组）63例随访时间9月~8年平均3年9个月，按MSTS膝关节评分标准、ambulation scores、关节屈伸度及感染、复发、手术时间进行评估。结果：A组：手术时间2.6625±0.3362h，复发5例，转移死亡3例，感染2例； B组：手术时间2.5722±0.2878h，复发3例，转移死亡2例，感染2例 。B组1例术后发生旋转轴聚乙烯轴套断裂关节脱位，再次手术更换轴套后未再出现并发症，两组无假体松动病例。两组手术时间无统计学意义；去除复发及转移死亡病例后,剩50例, A组32例， MSTS评分平均23.0/30分。 B组18例，MSTS评分平均23.7/30分。两组MSTS评分p>0.05，无统计学意义；ambulation scores各分项总分均p<0.05，有统计学意义．两组关节伸直时为0°或接近0°,屈曲度A组119.3750±17.49°，B组125.0000±15.34°，无统计学意义（p>0.05）。结论： 1. 按ambulation scores标准，在步行舒适度和快速步行方面，旋转型铰链假体置换组与单纯铰链型假体置换比较有统计学意义；2.而MSTS标准则未能体现出两组术后功能方面的统计学意义，因此ambulation scores较MSTS评分更灵敏，更适合对膝关节保肢术后功能评价；3.两组在手术时间、术后临床屈伸功能及并发症方面，如复发、感染，未见显著差别，单纯铰链型不会出现脱位，而可旋转铰链型假体有脱位的可能。     

螺旋CT及CAD技术在人工关节定制设计中的应用研究

随着生物医用材料研制和医学的迅速发展，以及生活水平、医疗保健、康复水平的提高，人们对自身组织、器官及骨骼缺损的修复和置换方面的要求日益提高，尤其对人造骨骼和人工关节的需求越来越广泛。由于计算机断层成像技术CT（computed tomography）已经成为显示和研究人体内部结构非常有用的手段，将计算机辅助设计技术CAD（Computer aided design）和计算机辅助工程CAE（Computer aided Engineering）等相关技术应用于人造骨骼和内置假体的设计，不仅可以提高产品的设计质量，同时，结合CT和计算机三维重建方法，