Artificial Anisotropy in Ge2Sb2Te5 Thin Films after Femtosecond Laser Irradiation

Ge₂Sb₂Te₅ (GST225) looks to be a promising material for rewritable memory devices due to its relatively easy processing and high optical and electrophysical contrast for the crystalline and amorphous phases. In the present work, we combined the possibilities of crystallization and anisotropic structures fabrication using femtosecond laser treatment at the 1250 nm wavelength of 200 nm thin amorphous GST225 films on silicon oxide/silicon substrates. A raster treatment mode and photoexcited surface plasmon polariton generation allowed us to produce mutually orthogonal periodic structures, such as scanline tracks (the period is 120 ± 10 μm) and laser-induced gratings (the period is 1100 ± 50 nm), respectively. Alternating crystalline and amorphous phases at the irradiated surfaces were revealed according to Raman spectroscopy and optical microscopy studies for both types of structures. Such periodic modulation leads to artificial optical and electrophysical anisotropy. Reflectance spectra in the near infrared range differ for various polarizations of probing light, and this mainly results from the presence of laser-induced periodic surface structures. On the other hand, the scanline tracks cause strong conductivity anisotropy for dc measurements in the temperature range of 200–400 K. The obtained results are promising for designing new GST225-based memory devices in which anisotropy may promote increasing the information recording density.     

颊舌减径对固定修复后基牙牙周受力影响的三维有限元研究

目的：以不同程度地减少固定桥桥体的颊舌径,观察固定桥基牙牙周膜的受力情况,了解桥体的颊舌减径是否可以减少固定桥基牙牙周的受力.方法：采用三维激光扫描与Marc软件结合的方式,建立双端固定桥桥体颊舌径分别为正常时的100%（M1）、90%（M2）、66.7%（M3）和50%（M4）的4个三维有限元模型,施加载荷,计算并分析牙周膜支持组织中的应力分布状况.结果：垂直均布加载时基牙牙周膜的受力随着咬合面积的减小而呈规律性的下降,但在垂直集中加载和斜向加载时牙周膜受力变化不显著.结论：单纯的颊舌减径并不能有效地起到降低牙周受力的作用.     

308 nm准分子激光联合富血小板血浆治疗白癜风有效性与安全性Meta分析

目的: 比较308 nm准分子激光联合富血小板血浆(platelet-rich plasma,PRP)与单用308 nm准分子激光治疗白癜风的有效性与安全性.方法: 检索PubMed、Embase、Web of Science、Cochrane Library、中国知网、万方、维普、中国生物医学文献数据库中关于308 ...     

【In Press】Effect of two different doses of intravitreal bevacizumab with temporal retina-sparing laser photocoagulation for retinopathy of prematurity

This study aims to compare the efficacy and safety between two different doses of intravitreal bevacizumab injection (IVB) with temporal retina-sparing laser photocoagulation (TRSL) for retinopathy of prematurity (ROP). We retrospectively evaluated 22 eyes of ROP infants who underwent IVB combined with partial TRSL for stage 3+ zone I or posterior zone II ROP. Laser photocoagulation was applied on the avascular retina, sparing two-disc-diameter width temporal avascular area anterior to ridge. A half dose (0.625 mg) or minimal dose (0.25 mg) of IVB was conducted. Four eyes in minimal dose group were retreated with IVB and laser photocoagulation on the spared retina. Of those 4 retreated eyes, three developed preretinal hemorrhage around the ridge after the first treatment, resulting in fibrotic macular dragging. A half dose of IVB may be more effective than a minimal dose with partial TRSL for ROP. Preretinal hemorrhage may be a harbinger of poor prognosis.     

Biomechanical profile of the cornea in primary congenital glaucoma

Purpose: The aim of our study was to investigate the biomechanical properties of the cornea in primary congenital glaucoma (PCG) and to identify the potential ocular determinants, which affect the corneal biomechanical metrics. Methods: Corneal hysteresis (CH), corneal resistance factor (CRF) and central corneal thickness (CCT) were measured in 26 patients with PCG (40 eyes) with the aid of ocular response analyser. In vivo laser‐scanning confocal microscopy was used for the estimation of stromal keratocyte density (KD) and the evaluation of corneal endothelium. Twenty normal subjects (40 eyes) served as controls. Student’s t‐test and Pearson’s correlation coefficients were used for statistical analysis. p Values <0.05 were considered statistically significant. Results: Corneal hysteresis, CRF and CCT were significantly reduced in patients with PCG (all p < 0.05). Corneal hysteresis and CRF negatively correlated with the corneal diameter in both groups (r₁ = ?0.53, r₂ = ?0.66, p < 0.001 for CH and r₁ = ?0.61, r₂ = ?0.69, p < 0.001 for CRF). Moreover, we identified a significant correlation between CH and CRF with CCT in both groups (r₁ = 0.51, r₂ = 0.48, p < 0.001 for CH and r₁ = 0.45, r₂ = 0.44, p < 0.001 for CRF). Mean KD was significantly reduced both in the anterior and posterior corneal stroma in patients with PCG (764 ± 162 and 362 ± 112 cells/mm², respectively) compared with controls (979 ± 208 and 581 ± 131 cells/mm², respectively) (p < 0.001). There was no significant correlation between the keratocyte density in anterior and/or posterior stroma and CH or CRF in any group (r₁ = 0.29, r₂ = 0.31, p < 0.06). Mean endothelial cell density was also significantly reduced in PCG group (2920 ± 443 cells/mm²) compared with control group (3421 ± 360 cells/mm²) (p < 0.001). Pleomorphism and polymegalism were significantly increased in corneal endothelium of patients with PCG. Conclusions: Our results showed a significant reduction in CH and CRF in PCG. Both CH and CRF were negatively correlated with corneal diameter. A significant correlation of CH and CRF with CCT was identified in both groups. Keratocyte density was decreased in PCG, but did not have a significant impact on CH and CRF. Mean endothelial density was also decreased in PCG. Our results suggest that reduced CCT and increased corneal diameter are major ocular determinants for the modified corneal biomechanical profile in PCG, while cellular alterations in corneal stroma and endothelium have no significant biomechanical impact.     

激光泪道成形联合硅胶管植入术治疗上泪道阻塞的临床观察

目的:观察激光泪道成形联合硅胶管植入术治疗上泪道阻塞的临床效果。方法:上泪道阻塞患者128例148眼,全部有流泪病史,均经泪道冲洗检查确诊,行激光泪道成形联合硅胶管植入术,保留硅胶管1a,拔管后随访24mo,定期冲洗泪道,观察泪道通畅情况。结果:拔管后治愈120眼(81.08%),无流泪,泪道保持通畅;好转18眼(12.16%),流泪减轻,泪道通而不畅;无效10眼(6.76%),仍流泪,泪道冲洗不通。总有效率达93.24%。结论:激光泪道成形联合硅胶管植入术是治疗上泪道阻塞的有效方法。     

Microstructure and Electrochemical Behavior of a 3D-Printed Ti-6Al-4V Alloy

3D printing (or more formally called additive manufacturing) has the potential to revolutionize the way objects are manufactured, ranging from critical applications such as aerospace components to medical devices, making the materials stronger, lighter and more durable than those manufactured via conventional methods. While the mechanical properties of Ti-6Al-4V parts manufactured with two major 3D printing techniques: selective laser melting (SLM) and electron beam melting (EBM), have been reported, it is unknown if the corrosion resistance of the 3D-printed parts is comparable to that of the alloy made with isothermal forging (ISF). The aim of this study was to identify the corrosion resistance and mechanisms of Ti-6Al-4V alloy manufactured by SLM, EBM and ISF via electrochemical corrosion tests in 3.5% NaCl solution, focusing on the effect of microstructures. It was observed that the equiaxed α + β microstructure in the ISF-manufactured Ti-6Al-4V alloy had a superior corrosion resistance to the acicular martensitic α′ + β and lamellar α + β microstructures of the 3D-printed samples via SLM and EBM, respectively. This was mainly due to the fact that (1) a higher amount of β phase was present in the ISF-manufactured sample, and (2) the fraction of phase interfaces was lower in the equiaxed α + β microstructure than in the acicular α′ + β and lamellar α + β microstructures, leading to fewer microgalvanic cells. The lower corrosion resistance of SLM-manufactured sample was also related to the higher strain energy and lower electrochemical potential induced by the presence of martensitic twins, resulting in faster anodic dissolution and higher corrosion rate.     

Sub-Threshold Fabrication of Laser-Induced Periodic Surface Structures on Diamond-like Nanocomposite Films with IR Femtosecond Pulses

In the paper, we study the formation of laser-induced periodic surface structures (LIPSS) on diamond-like nanocomposite (DLN) a-C:H:Si:O films during nanoscale ablation processing at low fluences—below the single-pulse graphitization and spallation thresholds—using an IR fs-laser (wavelength 1030 nm, pulse duration 320 fs, pulse repetition rate 100 kHz, scanning beam velocity 0.04–0.08 m/s). The studies are focused on microscopic analysis of the nanostructured DLN film surface at different stages of LIPSS formation and numerical modeling of surface plasmon polaritons in a thin graphitized surface layer. Important findings are concerned with (i) sub-threshold fabrication of high spatial frequency LIPSS (HSFL) and low spatial frequency LIPSS (LSFL) under negligible surface graphitization of hard DLN films, (ii) transition from the HSFL (periods of 140 ± 30 and 230 ± 40 nm) to LSFL (period of 830–900 nm) within a narrow fluence range of 0.21–0.32 J/cm², (iii) visualization of equi-field lines by ablated nanoparticles at an initial stage of the LIPSS formation, providing proof of larger electric fields in the valleys and weaker fields at the ridges of a growing surface grating, (iv) influence of the thickness of a laser-excited glassy carbon (GC) layer on the period of surface plasmon polaritons excited in a three-layer system “air/GC layer/DLN film”.     

A Feasibility Study of High-Entropy Alloy Coating Deposition by Detonation Spraying Combined with Laser Melting

In this work, a new two-stage approach to the deposition of high-entropy alloy coatings is proposed. At the first stage, a composite precursor coating is formed by detonation spraying of the metal powder mixtures. At the second stage, the precursor coating is re-melted by a laser, and the formation of multi-component solid solution phases can be expected upon solidification. The feasibility of the proposed approach was validated using three different mixtures of Fe, Ni, Cu, Co and Al powders. It was shown that detonation spraying allows forming composite coatings with a uniform distribution of the lamellae of different metals. The results of the structural analysis of the laser-treated coatings suggest that complete alloying occurred in the melt and face-centered cubic solid solutions formed in the coatings upon cooling.     

Microstructure and Friction Properties of CoCrFeMnNiTix High-Entropy Alloy Coating by Laser Cladding

To enhance the friction and wear properties of 40Cr steel’s surface, CoCrFeMnNi high-entropy alloy (HEA) coatings with various Ti contents were prepared using laser cladding. X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS) were used to characterize the phase composition, microstructure, and chemical composition of the samples. The findings demonstrated that the CoCrFeMnNiTi_x HEA coatings formed a single FCC phase. Fe₂Ti, Ni₃Ti, and Co₂Ti intermetallic compounds were discovered in the coatings when the molar ratio of Ti content was greater than 0.5. The EDS findings indicated that Cr and Co/Ni/Ti were primarily enriched in the dendrite and interdendrite, respectively. Ti addition can effectively enhance the coating’s mechanical properties. The hardness test findings showed that when the molar ratio of Ti was 0.75, the coating’s microhardness was 511 HV0.5, which was 1.9 times the hardness of the 40Cr (256 HV0.5) substrate and 1.46 times the hardness of the CrCrFeMnNi HEA coating (348 HV0.5). The friction and wear findings demonstrated that the addition of Ti can substantially reduce the coating’s friction coefficient and wear rate. The coating’s wear resistance was the best when the molar ratio of Ti was 0.75, the friction coefficient was 0.296, and the wear amount was 0.001 g. SEM and 3D morphology test results demonstrated that the coating’s wear mechanism changed from adhesive wear and abrasive wear to fatigue wear and abrasive wear with the increase in Ti content.