兔视网膜方向选择性神经节细胞树突的独特分枝模式及其生理意义

本实验研究了兔视网膜中的方向选择性神经节细胞 (direction selective retinal ganglion cells,DS cells)树突野的分枝模式。测量了视网膜中方向选择性神经节细胞和作为经典分枝模式神经元代表的α神经节细胞的树突直径。发现 ,方向选择性神经节细胞的树突在分枝后直径达到 0 .5 μm,进一步分枝树突直径仍保持在 0 .5 μm左右 ,这样 ,在方向选择性神经节细胞树突野中大多数树突直径在 0 .5μm左右。而作为经典分枝模式神经元代表的α神经元的树突每次分枝后都逐级变细 ,最终直径达到 0 .5μm左右 ,这样 ,α神经节细胞的树突直径大部分都大于 0 .5μm。我们应用程序“NEU RON”对在两种神经元模型中 ,抑制点落于兴奋点与胞体之间 (proximal)和抑制点不落于兴奋点与胞体之间 (distal)这两种情况进行模拟。我们发现 ,当抑制点不落于兴奋点与胞体之间时 ,在方向选择性神经节细胞的树突分枝模型中 ,抑制效果更强。那么 ,将使得方向选择性神经节细胞对抑制点落于兴奋点和胞体之间的要求变得不是那么迫切。所以 ,方向选择性神经节细胞的这种独特分枝模式 ,也许可以避免或至少减轻其在发育中可能会产生的连线的复杂性。并且 ,我们对得出的结论进行了电路分析 ,对方向选择性神经节细胞这种独特的分枝模式具有的?     

An imaging routine for assessing the efficacy of instruments used for scaling and root planning

Deposits of dental plaque or calculus are typically quantified using planimetric techniques. However, error is introduced into a quantitative analysis of plaque deposits using these methods, since they require a significant amount of human intervention. The purpose of this study is to describe and validate a computerized imaging routine which has the potential to objectively identify material on dental roots and measure the area covered by these deposits. Dentiform teeth with simulated plaque were videorecorded. A computer routine was developed based on a flood-fill algorithm which analyzed images of the dentiform teeth and determined the amount of simulated plaque on their root surfaces. Results showed that the dentiform teeth and their simulated plaque patterns are duplicated by the imaging routine in a rapid and reliable fashion. The system shows a high degree of accuracy with an average error factor of only 0.58%. As well, the system enables precise reproducibility with an average error factor of only 0.71%.     

6186例脑卒中患者发病时间的季节性分析

目的探讨青岛市区脑出血(CH)、脑梗死(CI)、蛛网膜下腔出血(SAH)发病时间的季节规律。方法收集青岛市1998年～2002年脑卒中患者6186例,其中CH1179人,CI4821人,SAH186人。圆分布分析探讨脑卒中患者发病时间的季节规律。结果CH冬季高发,平均角在1月份(P<0.05),男性患者的平均角在2月份(P<0.05),女性患者的平均角在1月份(P<0.05);CI秋季高发,男、女间无差别,平均角在10月份(P<0.05);SAH秋季高发,平均角在10月份(P<0.05),男性患者的平均角在9月份(P<0.05),女性患者的平均角在10月份(P<0.05)。结论青岛市的脑卒中发病具有季节性,在脑卒中预防工作中要充分考虑其发病的季节特点,并采取相应的措施。     

Non-invasive estimation of the diastolic elastic and viscoelastic properties of the left ventricle

The present study applies a non-invasive method to the quantitative evaluation of left ventricular stiffness in normal subjects and in patients with ischaemic heart disease (IHD). We have studied 20 patients with IHD and 25 healthy subjects. The third heart sound (S3) was detectable in all patients. We have correlated the energy spectrum of S3, divided into 15 Hz bands, with a series of echocardiographic parameters. The existence of a significant correlation between the spectrum energy and the diameter and thickness of the left ventricle at the moment of S3 allowed us to explore the possibility of interpreting the origin of S3 based on a mathematical model. Our hypothesis has been that, once the left ventricle starts vibrating, it behaves as a simple physical model composed of a mass and an elastic element. To this purely elastic model one can add a factor accounting for viscosity, with a damping effect, to obtain a more complex viscoelastic model. The stiffness coefficient 'k' was computed in both models from the peak frequency of S3 and the left ventricular mass at the moment of S3. Furthermore, in the viscoelastic model, the damping element 'c' was also computed. Both parameters--k and c--were significantly increased in the group with IHD compared with the control group. Although a simplification of the vibrating system, these models make it possible to obtain non-invasively information on the characteristics of the left ventricle through the combined use of echocardiography and spectral analysis of S3.     

Methods for analysis of a food frequency questionnaire

Fifty-five students and staff at Robert Gordon's Institute of Technology completed a food frequency questionnaire and then weighed their food for one week. Several methods of calculating nutrient intakes from the questionnaire are compared to results from the weighed inventory. Intakes of energy and several nutrients calculated using estimated typical portion weights were less than those derived from the weighed inventory. Food groups contributing to the apparent under-estimation have been identified. A further method of calculation involved derivation of a factor for each food group such that the frequency estimated from the questionnaire multiplied by the factor equalled the average weight of the foods in that group that had been eaten. Using these factors instead of the typical portion weights resulted in closer agreement to the weighed inventory method, but the difference ranged from positive for some groups to negative for others. Use of separate factors for each group of subjects reduced the range of differences to the weighed inventory method.     

Specific statistical considerations relevantto the design and analysis of gingivitis trials demonstrating

Simulation studies were conducted to address specific statistical issues which arise in the design and analysis of gingivitis studies whose principal aim is the demonstration of superiority or equivalence of one product to another. The effects of measurement scale, using differences or ratios of group means, particular statistical test produces and specific rules demonstrating superiority or equivalence were investigated. An alternative concept to equivalence—denoted “least as good”—was also defined and evaluated. For a wide class of possible distributions of gingivitis scores, characterized by specific gamma distributions, the student-t test applied to means of subject GI gingivitis scores proved to be the most powerful of the test produces considered, having statistical properties quite similar to the randomization or permutation test procedure. Transformations of subject GI mean gingivitis scores did not produce an advantage in demonstrating either superiority or equivalence, and in some cases made it more difficult. Little difference was observed in test results when using the difference in group means as compared with using the ratio of group means for demonstrating either equivalence or superiority. The clinically significant rule produced the lowest false-positive rates for products slightly better than the active control, and similar false-positive and -negative rates as the statistically significant rule for products clearly superior to the active control. Demonstration of product equivalence will require more subjects per group than demonstrating product superiority, the size of this difference being a function of the definition of superiority that is accepted. Showing that the 90% confidence interval for 100*R is completely contained within the [90%, 110%] interval is the preferred method of demonstrating equivalence today, although much more research needs to be done to improve methods for demonstrating product equivalence. The “least as good” alternative to “equivalence” makes it easier to demonstrate “equivalence” for products slightly better than the active control product, but both experience great difficulty in demonstrating equivalence for lest products not quite as good as the active control.     

Sequences in the proximal 5′ flanking region of the rat neuron-specific enolase (NSE) gene are sufficient for cell type-specific reporter gene expression

We investigated the regulation of the rat neuron-specific enolase gene using a transient transfection approach. Recent transgenic mouse studies have shown that a 1.8-kb segment of the ratNSE gene 5′ flanking region, including the first (noncoding) exon but not the first intron, is able to drive expression of a reporter gene in parallel with endogenousNSE. These data suggest thatcis-acting elements responsible for the spatial and temporal pattern ofNSE gene expression are located within the proximal 1.8 kb of the 5′ flanking sequence. To further investigate this region, we joined the 1.8-kb regulatory cassette to thecat reporter gene and generated a number of constructs in which the flanking sequence was progressively deleted from the 5′ end. These constructs were tested by transient transfection into neuronal and nonneuronal cells, followed by an assay for CAT activity. We found that as little as 255 bp of 5′ flanking sequence was able to confer cell type-specificity on the reporter gene. Further truncation to 120 bp of 5′ sequence resulted in a sharp downregulation of reporter activity in PC12 cells but a significant rise in both Neuro-2A neuroblastoma cells and nonneuronal Ltk- cells, indicating thatcis-acting elements controlling the regulation ofNSE in Ltk-, Neuro-2A, and PC12 cells may lie within the 135 bp region covered by this deletion. This region contains an AP-2 site and an element similar in sequence and position to a motif identified in the proximal promoter region of the neuron-specific peripherin gene. Reduction to 95 bp of 5′ sequence resulted in a slight downregulation of CAT activity in all cell lines tested, and further truncation to 65 bp of 5′ sequence caused a universal reduction to background levels of CAT activity, concomitant with the disruption of the basalNSE promoter. Our results show that the 5′ flanking region of theNSE gene is capable of conferring cell type-specificity on a heterologous gene in transfected cells and that elements responsible for this are located within the proximal 255 bp.     

Measurement of upper extremity orientation by video stereometry system

In the attempt to gain a broader understanding of the causal relationships behind work-related symptoms of pain in the human shoulder, monitoring of arm position is crucial. Different methods have been used with varying accuracy. A video-based stereometry system, using infra-red light and reflecting markers for motion analysis, has been introduced for measurements in the fields of ergonomics, biomechanics and sports medicine. The purpose of this study is to investigate the sources of error in using this system for posture registration of the upper limb. Measurements are performed on a calibration fixture, on a mechanical model of the upper limb and on a subject with an exoskeleton. Particular, attention is given to inconsistencies and relative errors due to the finite geometrical precision with which the markers are positioned in the calibration fixture and on the studied objects, the limited capability to align the objects relative to the coordinate system of the calibration fixture and the errors connected to angular measurements using protractors etc. It is concluded that the system makes a valuable addition to existing instruments for non-contact posture measurement, and produces position data with an adequate accuracy in normal handling.