A large mobility of hydrophilic molecules at the outmost layer controls the protein adsorption and adhering behavior with the actin fiber orientation of human umbilical vein endothelial cells (HUVEC)

Adhesion behaviors of human umbilical vein endothelial cells (HUVECs) are interestingly affected by the mobility of hydrophilic chains on the material surfaces. Surfaces with different molecular mobilities were prepared using ABA-type block copolymers consisting polyrotaxane (PRX) or poly(ethylene glycol) (PEG) central block (A block), and amphiphilic anchoring B blocks of poly(2-methacryloyloxyethyl phosphorylcholine-co-n-butyl methacrylate) (PMB). Two different molecular mobilities of the PRX chains were designed by using normal α-cyclodextrin (α-CD) or α-CD whose hydroxyl groups were converted to methoxy groups in a given ratio to improve its molecular mobility (PRX–PMB and OMe-PRX–PMB). The surface mobility of these materials was assessed as the mobility factor (Mf), which is measured by quartz crystal microbalance with dissipation monitoring system. HUVECs adhered on OMe-PRX–PMB surface much more than PRX–PMB and PMB-block–PEG–block-PMB (PEG–PMB) surfaces. These different HUVEC adhesions were correlated with the density of cell-binding site of adsorbed fibronectin. In addition, the alignment of the actin cytoskeleton of adhered HUVECs was strongly suppressed on the PEG–PMB, PRX–PMB, and OMe-PRX–PMB in response to the increased Mf value. Remarkably, the HUVECs adhered on the OMe-PRX–PMB surface with much less actin organization. We concluded that not only the cell adhesion but also the cellular function are regulated by the molecular mobility of the outmost material surfaces.     

The effects of topically applied polyNIPAM-based nanogels and their monomers on skin cyclooxygenase expression,ex vivo

Stimulus-responsive nanogels have potential as carriers for drugs targeting the skin. It is important to estimate the biocompatibility of such materials with the skin since they are directly in contact upon application and may induce irritation or inflammation. In the current work, blank (drug-free) polyN-isopropylacrylamide (polyNIPAM), poly(NIPAM copolymerized butyl acrylate) [poly(NIPAM-co-BA)], and poly(NIPAM copolymerized with 5% w/v acrylic acid) [poly(NIPAM-co-AAc)(5%)] nanogels were dosed onto freshly excised full-thickness porcine ear skin and the effects on the expression of cyclooxygenase-2 (COX-2) determined ex vivo by Western blotting. Modulated COX-2 expression was indicative that the material had penetrated the skin and keratinocytes of the viable epidermis. The poly(NIPAM-co-BA) nanogel was found to exert a proinflammatory response when applied topically, as reflected by 67% higher COX-2 expression relative to the control treatment (p = 0.0035). The data obtained for the poly(NIPAM-co-AAc)(5%) nanogel, on the other hand, indicated no significant modulation in the expression of COX-2 (p = 0.1578), suggesting the particles are compatible with skin. This was even the case in the presence of co-administered aqueous citric acid solution. Overall the data support the use of the multi-responsive poly(NIPAM-co-AAc)(5%) nanogel for triggered or controlled topical drug delivery applications.     

Energy Consumption for the Desalination of Salt Water Using Polyelectrolyte Hydrogels as the Separation Agent

The energy consumption for a novel desalination approach using charged hydrogels under externally applied pressure is experimentally measured and calculated. The salt separation is based on a partial rejection of mobile salt ions caused by the fixed charges inside the polyelectrolyte network. Self‐synthesized and commercial poly(acrylic acid) hydrogels are used to study the desalination performance in reference to sodium chloride solutions within the concentration range of 0.1–35 g L⁻¹. The influence of various synthetic parameters, such as the degree of crosslinking (DC) and the size and shape of the particles, is investigated. Furthermore, the effect of process parameters including the amount of the feed solution, the applied pressure profile, and the swelling time of the hydrogel is discussed. The best energy estimation found so far, is 8.9 kWh m⁻³ fresh water if a poly(acrylic acid) with a DC of 5 mol% is used in an infinite large salt bath.     

Effect of blending tricalcium phosphate on hydrolytic degradation of a block polyester containing poly(L-lactic acid) segment

The effect of blending tricalcium phosphate (TCP) on hydrolytic degradation of a new type of poly(L-lactic acid)/poly(ethylene;hexamethylene/ sebacate) block polyester (60 : 40 wt%) was studied. 100- and 250-μm film specimens blended with 0, 10, and 30 wt% TCP were immersed in phosphate buffered saline (pH 7.4) at 37°C for up to 80-104 weeks. At appropriate intervals, water absorption, dry and wet tensile strength, molecular weight, and thermal properties of the specimens were measured by weighing, tensile strength testing, size exclusion chromatography, and differential scanning calorimetry, respectively. Some samples were characterized by H NMR spectroscopy. Blending of TCP with the block polyester was effective in retarding degradation. The blended TCP was thought to retard degradation for the most part by neutralizing the lactic acid oligomers produced by hydrolysis of the poly(lactic acid) part during the initial stage of degradation.     

Surface Chemistry of Amphiphilic Polysiloxane/Triethyleneglycol‐Modified Poly(pentafluorostyrene) Block Copolymer Films Before and After Water Immersion

New amphiphilic block copolymers Si‐EFSx composed of a poly(dimethyl siloxane) (Si) block and a poly(4‐(triethyleneglycol monomethyl ether)‐2,3,5,6‐tetrafluorostyrene) (EFS) block are synthesized by atom transfer radical polymerization (ATRP) starting from a bromo‐terminated Si macroinitiator. Similarly, new hydrophobic block copolymers Si‐FSy consisting of an Si block and a poly(pentafluorostyrene) (FS) block are prepared for comparison. X‐ray photoelectron spectroscopy (XPS) analysis on block copolymer films reveals that the Si block is concentrated at the polymer–air interface, while the EFS block is located in the layers underneath. The same polymer films undergo a marked surface reconstruction after immersion in water for 7 d, as probed by XPS. This phenomenon involves the exposure of the hydrophilic oxyethylenic chains to contact water. Such surface reconstruction is even more drastic when an amphiphilic block copolymer is dispersed in a cross‐linked poly(dimethyl siloxane) matrix film.

     

聚乙二醇-柠檬酸共聚物(PEGCA)对聚乳酸的增韧及其机理

通过缩聚反应制备聚乙二醇-柠檬酸共聚物(PEGCA),通过密炼制备了PEGCA与聚乳酸(PLA)的共混物,研究了PEGCA对共混物的形貌结构、热性能和力学性能的影响。结果表明,PEGCA与PLA部分相容,PEGCA呈球状颗粒分散在PLA基体中。PEGCA对PLA有良好的增韧效果,当PEGCA质量分数为15%时,材料的断裂伸长率提高到327.9%,冲击强度提高到63.0 J/m。同时利用空穴化理论解释PEGCA增韧PLA的机理,用临界韧带厚度理论和J积分定量描述增韧的效果。     

Study of the water structure in poly(methyl methacrylate-block-2-hydroxyethyl methacrylate) and its relationship to platelet adhesion on the copolymer surface

The water structure and platelet compatibility of poly(methyl methacrylate (MMA)-block-2-hydroxyethyl methacrylate (HEMA)) were investigated. The molecular weight (Mn) of the polyHEMA segment was kept constant (average: 9600), while the Mn of the polyMMA segment was varied from 1340 to 7390. The equilibrium water content of the copolymers was found to be mainly governed by the HEMA content. The water structure in the copolymers was characterized in terms of the amounts of non-freezing and freezing water (abbreviated as W_nf and W_fz, respectively) using differential scanning calorimetry. It was found that the W_nf for the copolymers were higher than those estimated from the W_nf for the HEMA and MMA homopolymers and that the amount of excess non-freezing water depended on the polyMMA segment length. In addition, X-ray diffraction analysis revealed that some of the copolymers had cold-crystallizable water. These facts suggested that the polyMMA segments were involved in determining the water structures in the copolymers. Furthermore, the platelet compatibility of the copolymers was improved as compared to that of the HEMA homopolymer. It was therefore concluded that the platelet compatibility of the copolymer was related to the amount of excess non-freezing water.     

Effects of environmental parameters and composition of poly(2-hydroxyethyl methacrylate)-graft-polyamine copolymers on the retention of rat lymphocyte subpopulations (B- and T-cells)

Retention behavior of rat lymphocyte subpopulations (B- and T-cells) was investigated on poly(2-hydroxyethyl methacrylate)-graft-polyamine (HA) copolymers with various copolymer compositions. Separation mechanism of B- and T-cells was then evaluated by focusing on several parameters, such as pH, temperature, and ionic strength. The interaction of lymphocytes with HA surfaces was mainly through the electrostatic force from their retention profile at varying ionic strengths of the medium. Temperature also has a crucial effect on the response of lymphocytes toward pH-induced phase transition of polyamine grafts at the polymer interface with aqueous milieu. At 4°C, both B- and T-cells showed minimal retention on HA surfaces at pH 8. At this pH, polyamine grafts existed in a compact conformation with a low degree of protonation. However, at pHs below 8, at which polyamine grafts existed in extended conformation, the resolution of B- and T-cells was achieved. In contrast, at 23°C, the phase transition of polyamine grafts significantly influenced T-cell retention, resulting in a decrease in the retention of T-cells on HA with polyamine in a compact conformation. Consequently, preferential retention of B-cells was achieved under this condition. The polyamine content was found to be another important factor affecting the retention behavior of lymphocyte subpopulations. On HA copolymers with low polyamine content (HA7, HA10), conformational transition of polyamine grafts showed a significant influence for B-cell retention, although the influence decreased with increasing polyamine content. From the study estimating the effect of neuraminidase treatment of lymphocytes on their retention to HA surfaces, sialic acid residues on the plasma membrane surface of lymphocytes are suggested as feasible anionic sites showing electrostatic interaction with polyamine grafts.