Changes in UK ORL-HNS training scheme: Does the Indian trainee have a place anymore?

The determination of the UK Government to modernise medical careers, the shortage of training jobs for local medical graduates, the establishment of the Postgraduate Medical Training and Education Board (PMETB) and European Union rules have combined to change the scheme of surgical training in the United Kingdom. In the opinion of the author, the Indian Otorhinolaryngological (ORL) trainee can no longer aspire to reasonable higher training in the UK.     

The future of cardiovascular imaging and non-invasive diagnosis

Advances in medical imaging now make it possible to investigate any patient with cardiovascular disease using multiple methods which vary widely in their technical requirements, benefits, limitations and costs. The appropriate use of alternative tests requires their integration into joint clinical diagnostic services where experts in all methods collaborate. This statement summarises the principles that should guide developments in cardiovascular diagnostic services.This paper is published simultaneously in the European Heart Journal (2006;27:1750–1753) and in the European Journal of Echocardiography (2006;7:268–273).     

Hospital visiting in obstetrics and gynecology: a tool for the advancement of training.

OBJECTIVE: To assess the improvement of obstetric and gynecologic training brought about by peer influence in Europe. METHODS: In 1996, the European Board and College of Obstetrics and Gynecology (EBCOG) initiated a visiting process by international and local peers to improve training and decrease differences in health care standards. RESULTS: A large number of visits of obstetrics and gynecology departments have been conducted across Europe at teaching hospitals by the Hospital Visiting Committee. Compliance with the structured approach of the visiting policy and problems met during these visits are reported. CONCLUSION: The program focuses on the continuous improvement of the competencies of all persons trained in the obstetrics and gynecology departments of teaching hospitals throughout Europe. It also increases the understanding of diversity in training methods and can gradually lead to the convergence of training and health care standards in Europe.     

Training and assessment of laparoscopic skills.

Laparoscopic surgery is gaining popularity among the surgical community. While its prevalence expands, the need for reliable training and assessment tools is becoming increasingly important. Laparoscopic skills are not an innate behavior, nor can they be easily mimicked, and can only be acquired through hands-on training. A consensus exists among physicians that establishment and evaluation of technical skill in surgical training programs are inadequate and in need of improvement. A validated, reliable bench model that could train and assess could be standardized and provide numerous benefits including determination of which medical students should consider a career in surgery, valuable feedback to residents, a tracking mechanism of resident performance, a possible certification and recertification tool, and to allow for interinstitutional comparison. To this end, several potentially successful bench models testing dexterity, hand-eye coordination, and depth perception have been developed. A few models have been proven to be both valid and reliable indicators of technical skill. Although the future remains uncertain, enough groundwork has been laid to begin incorporating technical skill training and assessment into surgical training programs.     

Fracture frequency of all-ceramic crowns during dynamic loading in a chewing simulator using different loading and luting protocols

OBJECTIVE: The purpose of this laboratory study was to compare the frequency of failures (complete fractures or partial cracks) of molar crowns made of two different all-ceramic materials during dynamic loading in a chewing simulator, as well as the fracture load when subjected to static loading, in relation to different dynamic loading and luting protocols. METHODS: One hundred and forty-four molar crowns fabricated with IPS Empress or an experimental e.max Press material with high translucency (e.max Press Exp) were luted on CAD/CAM milled PMMA abutments (first lower molar, circular chamfer) either with Variolink or glass-ionomer cement (GIC). All crowns were loaded according to three different loading protocols (n=12 per group) and two force profiles (sinusoidal, rectangular) in a pneumatically driven chewing simulator with a steel stylus (? 8mm) and they underwent simultaneous thermocycling (5 degrees C/55 degrees C). After each phase the crowns were evaluated with regard to fractures or cracks. After dynamic testing, the crowns that did not fail were subjected to compression loading until complete fracture in a universal testing machine (UTM). As control groups, unloaded crowns were also subjected to a UTM. Survival statistics with log-rank tests were applied for the results of the dynamic loading, while ANOVA with post hoc Tukey B was used for the fracture load results and two-way ANOVA was carried out for logarithmically transformed data. Weibull statistics were calculated for pooled fracture load data of the dynamically loaded and control groups. RESULTS: In the 144 IPS Empress crowns, complete fractures were observed in 9 crowns and partial cracks in another 3 crowns. When the data was pooled, a statistically significant increase in fractures occurred when the sinusoidal force profile was applied compared to a rectangular force profile (log-rank, p<0.05). No fractures occurred in the e.max Press Exp crowns. The two-way ANOVA showed that the type of luting protocol used had the most significant effect on the fracture load of both materials. In conjunction with Empress, however, the luting material influenced the variability twice as much as in e.max Press Exp. There was no statistically significant difference in the fracture load of GIC-luted e.max Press Exp crowns and that of the Variolink luted Empress crowns. The force profile had a significant effect on the fracture load only of the Empress crowns but not of the e.max Press Exp crowns. Weibull statistics revealed a higher scattering of the data of dynamically loaded crowns compared to that of the control groups. CONCLUSIONS: For testing all-ceramic materials, dynamic loading is indispensable to draw valid conclusions on clinical performance of all-ceramic molar crowns. A sinusoidal profile is advisable, while a gradual increase of the force amplitude does not significantly affect the results.     

Renal acid excretion in early infancy

In early infancy, complex disorders of acid base metabolism are more frequent than in any other age group, with a predisposition to metabolic acidosis due to an age-related low renal capacity for acid excretion and an unphysiologically high actual renal acid load in nutrition with common formulas. Recently in preterm and small-for-gestational-age infants, persistent maximum renal net acid excretion (NAE) with subnormal or normal blood acid base status, impaired weight gain, and adaptive hormonal reactions have been observed. Incipient late metabolic acidosis is one example of a mixed disorder of acid base metabolism with maximum renal NAE in early infancy. Alkali therapy is highly effective and can be realized both on an individual basis, using urine pH screening as a diagnostic criterium for maximum renal acid stimulation, or on a general preventive level using modified standard formula with a reduced actual renal NAE similar to that seen on alimentation with human milk. From an integrated point of view, the low glomerular filtration rate and renal capacity for acid excretion beyond the developmental age of more than 44 weeks, may well be interpreted as the result of a specific adaptation to breast feeding sparing energy, and thus an evolutionary advantage for the survival of mother and child. Received July 10, 1996; received in revised form and accepted October 7, 1996     

Complications of surgical endoscopy

Background: This study examines the notion that gastrointestinal endoscopy performed by supervised surgical residents is safe. Methods: We reviewed all gastrointestinal endoscopic procedures performed by surgical residents with faculty supervision for complications and deaths occurring up to 30 days following the procedures. Results: The overall complication rate for 9,201 upper and lower endoscopy procedures was 1.4% and 0.42%, respectively. Overall mortality rate was 0.76% for upper endoscopy and 0.6% for lower endoscopy. No mortality was a direct result of a procedure-related complication. Intestinal perforation, drug overdose, bleeding, and aspiration were the most common procedure-related complications. Each resident completed an average of 75 upper endoscopies and 79 lower endoscopies during their training period. Conclusions: Gastrointestinal endoscopy can be performed safely by surgical residents with appropriate supervision. The higher morbidity and mortality of upper endoscopy are most likely related to the underlying disease rather than the procedure. Awareness of common complications and application of appropriate precautions and instruction are critical for minimizing complications. Received 25 March 1996/Accepted: 24 April 1996     

聋儿自信心的培养

由于家庭教育方式不当，使许多聋儿胆小．懦弱，缺乏自信心。本文通过调查研究，分析了聋儿缺乏自信心的原因，并在实践的基础上归纳出提高聋儿自信心的几项措施。     

Shoulder strain in keyboard workers and its alleviation by arm supports

Summary Keyboard work consists mostly of dynamic contractions of the small muscles of the forearms and hands. This is accompanied by continuous activity in the arm, shoulder and neck muscles keeping the head and hand in the correct position. Eliminating the weight from the arm by means of support and the position of the arms influences the electrical activity of shoulder muscles when working at a keyboard. We studied the influence of elbow angle, as well as that of different arm supports, on electrical activity of upper trapezius muscle during keyboard work in healthy workers and persons suffering from shoulder pains. The measurements were carried out in the laboratory. EMG activities, which where measured as mean square root (RMS)-values at every 100-millisecond period in trapezius muscle when working, were lower, the greater the elbow angle. Furthermore electrical activity decreased when subjects used arm supports while working. It is evident that the static load to shoulder muscles can be lowered significantly in keyboard work, when the forearms are at an angle of at least 100 degrees and by using arm supports. The most convienient and ergonomic working position can also be found individually be the method used here.     

Does a tensioning device pinned to the tibia improve knee anterior–posterior load‐displacement compared to manual tensioning of the graft following anterior cruciate ligament reconstruction? A cadaveric study of two tibial fixation devices

Devices that are pinned to the tibia to tension an anterior cruciate ligament (ACL) graft produce joint reaction loads that in turn can affect the maintenance of graft initial tension after tibial fixation and hence knee anterior-posterior (AP) load-displacement. However, the effect of these devices on AP load-displacement is unknown. Our objectives were to determine whether tensioning by device versus tensioning by hand causes differences in AP load-displacement and intraarticular graft tension for two commonly used tibial fixation devices: a bioresorbable interference screw and a WasherLoc. AP load-displacement and intraarticular graft tension were measured in 20 cadaveric knees using a custom arthrometer. An initial tension of 110 N was applied to a double-looped tendon graft with the knee at extension using a tensioning device pinned to the tibia and a simulated method of tensioning by hand. After inserting the tibial fixation device, the 134 N anterior limit (i.e., anterior position of the tibia with respect to the femur with a 134 N anterior force applied to the tibia) and 0 N posterior limit (i.e., AP position of the tibia relative to the femur with a 0 N force applied to the tibia) were measured with the knee in 25 degrees flexion. Intraarticular graft tension was measured at extension. These limits and intraarticular graft tension were also measured after cyclically loading the knee 300 times. Compared to a simulated method of tensioning by hand, tensioning with a device pinned to the tibia did not decrease the 134 N anterior limit and did not cause posterior tibial translation. However, intraarticular graft tension was maintained better with a tensioning device pinned to the tibia for the Washerloc, but not the interference screw. For two commonly used tibial fixation devices, a tensioning device pinned to the tibia does not improve AP load-displacement at 25 degrees flexion over tensioning by hand when the graft is tensioned at full extension, but does improve the maintenance of intraarticular graft tension for the Washerloc.