中日友好医院分型股骨头坏死腓骨植入治疗的三维有限元分析

文题释义：股骨头坏死中日友好医院分型的有限元分析：根据李子荣等提出的中日友好医院分型，建立股骨头坏死三维模型，分为 M型(内侧型)、C型(中央型)和 L型(外侧型)，其中 L型包括L1型(次外侧型)、L2型(极外侧型)和 L3型(全头型)。通过对建立的模型进行有限元分析，为该分型的保髋治疗提供了一定力学依据，显示外侧柱的存留是精准预防塌陷的重要因素，为进一步实现个体化治疗提供力学基础。 腓骨支撑坏死股骨头保髋手术：是对于早中期股骨头坏死需要保留股骨头患者进行的一种手术方式。首先需对股骨头进行髓芯减压，清除一定坏死骨，空腔填塞松质骨(髂骨为主)，打压结实后植入腓骨(异体或自体)支撑，给坏死区的提供力学支撑及生物学修复，预防股骨头进一步坏死及塌陷。 背景：研究报道股骨头坏死的保髋疗效与外侧柱存留密切相关，中日友好医院分型是根据三柱结构确立的，对股骨头塌陷的预测准确性高。 目的：建立股骨头坏死中日友好医院分型各分型仿真的三维有限元模型，通过有限元分析各分型腓骨植入的力学变化，探讨外侧柱存留对保髋疗效的意义，为该分型的塌陷精准预测提供基础。 方法：建立正常股骨头、中日友好医院分型(M型、C型、L1型、L2型、L3型)股骨头坏死及其腓骨植入3组11种三维有限元模型，运用ANSYS软件进行有限元分析计算，观察各组模型的最大应力值、最大位移值及股骨头内部载荷传递模式。 结果与结论：①坏死组位移最大，应变最大，且因坏死分型不同而位移不同，位移变化如下：M型相似文献   

单纯 Ilizarov 环形外固定技术治疗合并骨筋膜室综合征的胫骨平台骨折

目的探讨单纯 Ilizarov 环形外固定技术治疗合并骨筋膜室综合征的胫骨平台骨折的疗效。方法2013 年 9 月—2017 年 3 月，收治 30 例合并骨筋膜室综合征的胫骨平台骨折患者，采用单纯 Ilizarov 环形外固定技术治疗。男 23 例，女 7 例；年龄 23～43 岁，平均 34.4 岁。致伤原因：交通事故伤 12 例，高处坠落伤 4 例，摔伤 8 例，重物砸伤 6 例。受伤至入院时间 1～12 h，平均 4.8 h。骨折 Schatzker 分型：Ⅱ型 1 例、Ⅲ型 3 例、Ⅳ型 10 例、Ⅴ型 7 例、Ⅵ型 9 例。30 例均因骨筋膜室综合征行切开减压；切开减压至手术时间为 10～15 d，平均 12.5 d。治疗后采用膝关节学会评分系统（KSS）及 Ilizarov 方法研究与应用协会（ASAMI）协议评价膝关节功能。结果手术时间 110～155 min，平均 123.1 min；术中出血量 100～500 mL，平均 245 mL；术后住院时间 3～5 d，平均 3.8 d。患者均获随访，随访时间 20～24 周，平均 22.7 周。除 2 例患者出现针道感染征象外，无其他并发症发生。X 线片复查显示骨折均愈合，愈合时间 10～20 周，平均 14.6 周。末次随访时，膝关节 KSS 临床评分总分为 70～95 分，平均 87.5 分；功能评分总分为 70～90 分，平均 79.0 分。参照 ASAMI 协议评价获优 24 例、良 3 例、可 2 例、差 1 例。结论对于合并骨筋膜室综合征的胫骨平台骨折，单纯 Ilizarov 环形外固定技术治疗后患者关节功能可以基本恢复且并发症少，是一项相对安全、有效的治疗方法。     

Customized three-dimensionally printed mandibular external fixator

The advent of customized three-dimensional (3D) printing allows the affordable manufacturing of sophisticated medical devices, thereby providing swift and simple solutions to specific needs in modern healthcare. Meanwhile, certain devices such as industrial mandibular external fixators (EFs) have become less and less available from medical device companies because of decreased indications. What is more, their handling is often complex. The authors report, step by step, the original design and uneventful clinical use of a 3D-printed, customized mandibular EF. This device was designed together with a positioning and drilling guide for the fixation of a septic mandibular pseudarthrosis. It provided an adequate and satisfactory balance between lightness and rigidity. A simple, accurate and safe placement of the EF was achieved thanks to the skin-supported positioner and drilling guide, thereby making the procedure minimally invasive and time-efficient. To our knowledge, this is the first reported clinical use of a 3D-printed, customized mandibular EF to date. Because such 3D technology is becoming increasingly available to a large number of surgeons, the authors believe that the present innovation could become an alternative to reusable standard EFs.     

Standard versus customised locking plates for fixation of schatzker ii tibial plateau fractures

Aim3D-printed implants could improve the capture of fracture fragments for improved stability of tibial plateau fracture fixation. The aim of this study was to compare the biomechanical strength of fixation constructs using standard and customised 3D-printed proximal tibial locking plates for fixation of tibial plateau fractures.MethodsThis is a biomechanical study utilising six pairs of cadaveric tibiae. Fractures were created in an identical fashion using an osteotome and mallet, and fixed using either a standard, commercially-available proximal tibia locking plate or a customised 3D-printed plate. Design and production of the customised plates followed a “3D printing at point-of-care” model. Customised stainless steel 316 L plates were produced within a local additive manufacturing laboratory based upon pre-operative CT scans. Determination of implant choice within each cadaver pair was performed via simple randomisation. Following fracture fixation, the tibiae were skeletalised and biomechanically tested using a customised loading jig and a size-matched femoral knee prosthesis. The constructs were loaded cyclically from 100 N to approximately three times the cadaveric body-weight at 5 Hz for 10 000 cycles. Every 1000 cycles, the test was paused and the tibia was physically checked for failure. If failure had not occurred by the end of the testing cycle, the construct was loaded to failure and the load at which the construct failed was noted.ResultsFixation constructs using the 3D-printed plates performed comparably to those using the standard plates. There was no significant difference in the degree of fracture fragment displacement in both constructs. Overall longitudinal construct stiffness and load to failure was higher in the 3D-plates group but this did not reach statistical significance.ConclusionProduction of customised plates for proximal tibia fractures at point-of-care is feasible, however fixation constructs with these plates did not provide any biomechanical advantage over standard plates in terms of axial loading stiffness.     

(-)-Epigallocatechin-3-gallate,reduces corneal damage secondary from experimental grade II alkali burns in mice

Background

Since recent reports have shown that (-)-Epigallocatechin-3-gallate (EGCG) could be used for treating proliferative and inflammatory disorders, we explored its use for the management of corneal chemical burns.

Electronic clinical records in primary care for estimating disease burden and management. An example of COPD

Chronic obstructive pulmonary disease (COPD) is a significant health problem in developed countries. We aimed to estimate the prevalence of COPD in a single Spanish healthcare area. We also aimed to assess if there are any differences in prevalence and spirometry use among primary care services by utilizing already registered information. We designed a cross-sectional study to determine the prevalence of COPD and the performance of spirometries in each primary care service. A total of 8,444 patients were diagnosed with COPD, with a prevalence of 2.6% for individuals older than 39 years. The prevalence increased with age and was much higher in men. Significant heterogeneity was found in the prevalence of COPD and spirometry use among primary care services. COPD was underdiagnosed and there was wide variability in spirometry use in our area. Greater efforts are needed to diagnose COPD in order to improve its clinical outcomes and to refine registries so that they can be used as reliable sources of information     

利用耳甲腔型小耳畸形残耳皮瓣及软骨改善再造耳颅耳沟效果观察

目的探讨对先天性耳甲腔型小耳畸形患者行全扩张法全耳再造术后，利用残耳皮瓣改善再造耳颅耳沟的效果。方法回顾分析 2012 年 1 月—2017 年 1 月收治的 150 例先天性耳甲腔型小耳畸形患者。其中男 92 例，女 58 例；年龄 6.5～35.0 岁，平均 11.1 岁。采用一期扩张器埋置、二期全扩张法全耳再造术后发现上部颅耳沟浅显；于 6～12 个月后行三期再造耳修整。将残耳垂通过“Z”字改型转移以再造耳垂。在残耳上部作蒂在轮屏切迹的残耳上部皮瓣，弧形切开松解并加深上部颅耳沟，将上部残耳皮瓣向颅耳沟创面旋转推进缝合以覆盖创面；将带皮下组织蒂的残耳软骨组织瓣插入支架底部形成的腔隙内，并缝合固定，以增加支架的高度；耳甲腔区其余残耳皮瓣用以覆盖耳甲腔创面。结果术后拆线时 1 例患儿皮瓣远端出现直径约 0.5 cm 的表皮水疱，经换药 2 周后愈合；其余患者皮瓣成活良好。患者均获随访，随访时间 6～12 个月，平均 9.6 个月。再造耳上部颅耳沟均明显加深，再造耳支架高度不同程度增加，双耳对称性佳，耳甲腔无明显挛缩变小，再造耳外观满意。再造耳上部表面毛发明显减少，耳周发际线上移。结论采用耳甲腔型小耳畸形的残耳皮瓣及残耳软骨瓣转移，不仅可加深颅耳沟，而且可增加上部支架的高度，术后颅耳沟变形较轻，再造耳与正常耳廓的对称性更佳。