电化学共沉积制备有机高聚物/钙磷复合陶瓷膜层--Ⅱ XPS、SIMS表征及力学性能研究

通过电化学共沉积方法制备具有生物活性的有机高聚物／钙磷陶瓷复合膜层。用XPS、SIMS等对复合膜层的化学组分进行表征，证明少量有机高聚物可能在分子层次上掺杂形成有机高聚物／羟基磷灰石复合膜层。对电沉积HAP陶瓷膜层进行微刮痕实验表明，陶瓷膜层与金属基体的结合力得到显著改善。     

Morphology and Thermal Properties of MCPA6/ABS by in situ Polymerization of ε‐Caprolactam

Summary: In this work, blends of monomer casting polyamide 6 (MCPA6) and acrylonitrile‐butadiene‐styrene (ABS) were successfully prepared by in situ polymerization via the application of ε‐caprolactam as a reactive solvent. The morphology and thermal properties of MCPA6/ABS were investigated by means of wide angle X‐ray diffraction (WAXD), differential scanning calorimetry (DSC) and scanning electron microscopy (SEM), respectively. The domain sizes of the ABS phase in MCPA6/ABS blends were much finer than those in corresponding polyamide 6 (PA6)/ABS blends prepared by simple melt blending. With an increased amount of ABS in MCPA6, the melt enthalpy (ΔH_f), the rate of crystallization (T_c) and the degree of crystallinity (X_c(DSC)) of MCPA6 in MCPA6/ABS blends were all decreased. The degree of supercooling (ΔT_d) showed a contrary trend. However, the melting temperatures of these blends were almost unchanged. All the results could be attributed to in situ polymerization and the hydrolysis reaction of ABS that occurred during the polymerization process. Furthermore, WAXD results showed that only α‐form crystals existed in the MCPA6/ABS blends, despite the ABS content and heat treatment.

SEM micrograph of the fractured surface of an MCPA6/ABS blend with an ABS content of 20 wt.‐% (×10 000).     

人体体温下UHMWPE人工髋臼材料压缩性能的试验研究

模拟人体体温下对超高分子量聚乙烯（UHMWPE）人工髋臼材料进行了压缩力学性能的试验研究,并与室温下的试验结果进行了对比.当由室温22℃升高到体温37℃和40℃时,其屈服应力呈明显的下降趋势,分别下降了23.1%和31.9%,由体温37℃升高到40℃时,二者仅差3℃,其屈服应力亦下降了11.5%.同时还对不同加载速度下UHMWPE试件压缩变形过程进行了红外辐射温度的监测与分析.不同加载速度下试件压缩变形过程中的红外辐射温度均有明显升高,加载时间越长,试件平均红外辐射温度越高.试验结果分析表明,不能忽视植入人体后UHMWPE人工髋臼局部受压时温度的升高,特别不能忽视植入人体后在人体体温作用下其力学性能的改变和下降,人体体温的作用是UHMWPE人工髋臼出现过早失效的原因之一.本试验研究为UHMWPE材料在人体环境中的应用研究提供了参考.     

Acrylic‐Based Polyurethane/Silica Hybrids Prepared by Acid‐Catalyzed Sol–Gel Process: Structure and Mechanical Properties

Summary: Silica sols were first prepared based on different ratios of tetraethoxysilane (TEOS) and methyltriethoxysilane (MTES) by an acid‐catalyzed sol–gel process, and then incorporated into acrylic‐based polyurethanes. The structures and morphologies of silicone‐oxo clusters were studied by ²⁹Si NMR, SAXS, and scanning electron microscopy (SEM), whereas the mechanical properties of polyurethane/silica hybrids were characterized by DMA and tensile tests. The silicone‐oxo clusters in both silica sol and polyurethane hybrids became denser and larger at a higher molar ratio of TEOS/MTES and higher silica content, and the silica‐oxo clusters of polyurethane/silica hybrids even became more compact and larger than those of silica sols, increasing the elastic modulus and tensile strength of polyurethane/silica hybrids.

Typical structure of silica sol prepared from the hydrolysis and condensation of TEOS and MTES with acid as the catalyst.     

不同转移特性瘤细胞系的筛选及其生物学特性

目的：探讨与肿瘤转移相关的某些生物学特性。方法：将小鼠乳腺癌Ｃａ７６１－ＦＰ８／Ｌ和Ｃａ７６１－ＦＬ１０／Ｌ经体内筛选得到细胞系Ｃａ７６１－Ｐ５Ｂ和Ｃａ７６１＝Ｌ６Ｂ，并观察其瘤细胞与凝集反应、靶器官组织条件培养基对瘤细胞真挚化作用等，结果：Ｃａ７６１－Ｐ５Ｂ具有高肺转移、低淋巴结转移特性，Ｃａ７６１－Ｌ５Ｂ具有低肺、低淋巴结转移特性。两个瘤细胞系的细胞表面的糖基表达，对条件培养的趋化反应不同。结     

不同处理方法的牛心包生物力学特性测试分析

目的　探索一种理想的牛心包处理方法。方法　观察戊二醛及 2 ,3 -丁二醇改性戊二醛处理后的牛心包热挛缩温度、生物力学特性及超微结构变化。结果　鞣制后心包厚度和僵硬度增加 ,柔韧性降低。丁二醇组的弹性模量 (8.75± 1 .71 )较戊二醛组 (6.5 9± 1 .3 7) (P <0 .0 5 )更近似于正常瓣膜组织 ;且其极限拉伸强度优于戊二醛组。超微结构显示丁二醇组胶原纤维与弹性纤维结构完整 ;戊二醛组胶原纤维和弹性纤维均明显变性 ,结构模糊。结论　 2 ,3 -丁二醇改性处理后的牛心包具有更好的生物力学特性 ,该方法是一种较为理想的牛心包处理方法     

Cross education of muscular strength during unilateral resistance training and detraining

Abstract. The purpose of the present study was to examine the changes in maximum voluntary isometric contraction (MVC) in the contralateral untrained limb during unilateral resistance training and detraining, and to examine the factors inducing these changes by means of electrophysiological techniques. Nine healthy males trained their plantar flexor muscles unilaterally 4 days·week^–1 for 6 weeks using 3 sets of 10–12 repetitions at 70–75% of one-repetition maximum a day, and detrained for 6 weeks. Progressive unilateral resistance training significantly (P<0.05) increased MVC, integrated electromyogram (iEMG), and voluntary activation in the trained and contralateral untrained limbs. The changes in MVC after training were significantly correlated with the changes in iEMG in both limbs. No significant changes occurred in MVC, voluntary activation, and iEMG in the contralateral limb after detraining. The changes in MVC after detraining did not correlate with the changes in voluntary activation or iEMG in either limb. Training and detraining did not alter twitch and tetanic peak torques in either limb. These results suggest that the mechanisms underlying cross education of muscular strength may be explained by central neural factors during training, but not solely so during detraining. Electronic Publication     

Mechanical Characterization of an In Vitro Device Designed to Quantitatively Injure Living Brain Tissue

Due to the nonlinear, viscoelastic material properties of brain, its mechanical response is dependent upon its total strain history. Therefore, a low strain rate, large strain will likely produce a tissue injury unique from that due to a high strain rate, moderate strain. Due to a lack of current understanding of specific in vivo physiological injury mechanisms, a priori assumptions cannot be made that a low strain rate injury induced by currently employed in vitro injury devices is representative of clinical, nonimpact, inertial head injuries. In the present study, an in vitro system capable of mechanically injuring cultured tissue at high strain rates was designed and characterized. The design of the device was based upon existing systems in which a clamped membrane, on which cells have been cultured, is deformed. However, the present system incorporates three substantial improvements: (1) noncontact measurement of the membrane deflection during injury; (2) precise and independent control over several characteristics of the deflection; and (3) generation of mechanical insults over a wide range of strains (up to 0.65) and strain rates (up to 15s^–1). Such a system will be valuable in the elucidation of the mechanisms of mechanical trauma and determination of injury tolerance criteria on a cellular level utilizing appropriate mechanical injury parameters.     

工程化肌腱修复肌腱缺损后力学特性的组织学基础

探讨组织工程化肌腱修复肌腱缺损后体内愈合过程中力学特性的组织学基础。取罗曼鸡肌腱细胞 ,经体外培养、扩增 ,与可降解生物材料聚羟基乙酸筛网构建工程化肌腱 ;将其植入修复 2 0只罗曼鸡第二趾深屈肌腱0 .5～ 0 .8cm缺损。术后第 2、4、6、8周取材 ,对标本进行大体、组织学及生物力学测定。植入 2、4、6、8周 ,新生肌腱在大体形态、细胞及胶原纤维排列方式上与正常肌腱相似 ,但新生肌腱的胶原纤维束并未形成较多的沿肌腱长度方向的致密结构 (“塑形”) ,导致其最大张力增加缓慢 ,到 8周时为 15 .4 0± 10 .6 3N,仅达正常肌腱的 2 3 ;8周时最大张应变为 2 2 .4 9± 10 .2 1 ,比正常肌腱大 10。结果表明 ,单纯聚羟基乙酸作支架 ,材料降解过快 ,新生肌腱失去了正常的力学刺激 ,“塑形”能力差 ,其生物力学强度低。提示 ,保持新生肌腱形成过程中正常的力学刺激对新生肌腱的“塑形”可能是至关重要的。     

Synthesis and Optical Properties of a New Series of Side‐Chain Poly(amic acid)s With p‐π Conjugation

Summary: After the condensation polymerization of benzoguanamine (BGA) and pyromellitic dianhydride (PMDA) under microwave irradiation, the resulting p‐π conjugate poly(amic acid) was grafted via the azo coupling reaction. The obtained side‐chain polymers were further grafted with TDI‐aliphatic alcohol derivatives and TDI‐aniline derivatives. The third‐order NLO coefficient and response time of PAA and graft polymers were measured by degenerated four wave mixing (DFWM) technique and their fluorescent properties were also investigated. All of the graft polymers have larger NLO coefficients and film‐formability than PAA. Their fluorescent properties were also changed by the different electronic effect of the side‐chains. The influences of the introduction of side‐chains, the side‐chain length and the electronic effect of the substituting groups on the azobenzol side‐chain to both optical properties of the polymers by varying the conjugation degree were investigated.