Radium-228 determination of natural waters via concentration on manganese dioxide and separation using Diphonix ion exchange resin

The objective of this work was to establish a new procedure for ²²⁸Ra determination of natural waters via preconcentration of radium on MnO₂ and separation of its daughter, ²²⁸Ac, using Diphonix ion exchange resin. Following removal of potential interferences via passage through an initial Diphonix Resin column, the first daughter of ²²⁸Ra, ²²⁸Ac, is isolated by chromatographic separation via a second Diphonix column. A holding time of >30 h for ²²⁸Ac ingrowth in between the two column separations ensures secular equilibrium. Barium-133 is used as a yield tracer. Actinium-228 is eluted from the second Diphonix Resin with 5 ml 1 M 1-Hydroxyethane-1,1-diphosphonic acid (HEDPA) and quantified by addition of scintillation cocktail and LSC counting. Radium (and ¹³³Ba) from the load and rinse solutions from the 2nd Diphonix column may be prepared for alpha spectrometry (for determination of ²²³Ra, ²²⁴Ra, and ²²⁶Ra) by BaSO₄ microprecipitation and filtration. Decontamination tests indicate that U, Th, and Ra series nuclides do not interfere with these measurements, although high contents of ⁹⁰Sr (⁹⁰Y) require additional treatment for accurate measurement of ²²⁸Ra. Addition of stable Sr as a “hold back” carrier during the initial MnO₂ preconcentration step was shown to remove most ⁹⁰Sr interference.     

接枝环氧树脂水分散液的合成、分离与表征

控制不同的反应条件,采用甲基丙烯酸、苯乙烯与环氧树脂在丙二醇丁醚/正丁醇溶剂中接枝共聚,合成了粒径在87～104nm范围的环氧树脂水分散液。通过环己烷/乙醇和丙酮两步萃取,对接枝共聚产物进行分离,用FTIR表征,并估算了接枝共聚物的组成。实验结果表明,所制备的粒径为纳米级的环氧树脂水分散液,具有良好的机械稳定性、冻融稳定性及贮存稳定性。ξ电位测定表明,产物在pH>8的条件下更为稳定。     

Dermatitis from hexavalent chromate in the accelerator of an epoxy sealant (PR1422) used in the aircraft industry

4 aircraft construction workers developed allergic contact dermatitis of the hands and forearms. The allergen was hexavalent chromate in the accelerating solution of an epoxy-based sealant (PR1422). Although chromate dermatitis from an epoxy resin has been described, epoxy system accelerators are a hitherto unrecognized source of occupational chromate dermatitis.     

Occupational allergic contact dermatitis and composition of acrylates in dentin bonding systems

Background Dentin-bonding systems contain sensitizing acrylates. They are increasingly used in dentistry, but only few cases of allergy have been encountered. Objective This study reports observations on eleven patients sensitized by acrylates in dentin-bonding compounds. Furthermore, the composition of dentin-bonding products was analysed and compared with the information given in the material safety data sheets. Methods Patch testing was performed to reveal allergic contact dermatitis, and chamber provocation tests to reveal possible respiratory sensitivity. Gas chromatography/mass spectrometry was used to analyse the chemical composition of the bonding products. Results The most common sensitizer in our material of eleven patients was 2-hydroxyethyl methacrylate (2-HEMA). Another putative sensitizer, BIS-GMA, used in dentin adhesives, did not cause sensitization. The typical allergic dermatitis localized to the fingertips (pulpitis). Seven of the eleven patients also developed paresthesia of the fingertips. One patient with positive patch test reactions to (meth)acrylates had pharyngitis hut no skin symptoms. One patient was sensitized because she had been patch tested with too high a concentration (undiluted) of dentin-bonding components. Material safety sheets gave inaccurate or wrong information about the contents. Conclusion Dentin-bonding acrylates are strong sensitizers, and even a single exposure may sensitize.     

复合树脂预热的研究现状和临床应用

复合树脂作为临床常用牙科充填材料存在耐磨性差、聚合收缩大和牙本质边缘适应性不佳等问题。近年有研究发现预热可以改善复合树脂的性能,本文就预热复合树脂对其单体转化率、边缘微渗漏、机械性能以及牙髓的影响等方面进行探讨,以供临床参考。     

口腔修复陶瓷材料的磨损性能北大核心

背景:陶瓷材料因具有优良的机械性能、与口腔组织良好的生物相容性及高度美观性广泛应用于口腔修复领域,良好的磨损性能对修复体临床应用有重要意义。目的:综述口腔修复陶瓷材料磨损性能机制及临床研究,以期为临床选择适宜的陶瓷材料提供思路。方法:应用计算机在PubMed和Web of Science数据库检索在2016年1月至2021年4月期间涉及口腔修复陶瓷材料磨损性能的相关研究。英文检索词为“dental ceramic material,wear property”,最终共纳入36篇文献进行分析。结果与结论:①全瓷材料自身耐磨性均高于树脂陶瓷复合材料,全瓷材料中氧化锆陶瓷磨损性能最佳,美学性能较弱。②玻璃陶瓷中氧化锆加强型硅酸锂玻璃陶瓷磨损性能较好,但应用时间较短,长期疗效还有待更多的研究证实。③树脂陶瓷复合材料中树脂纳米陶瓷材料磨损性能优于聚合物渗透陶瓷。④在后牙区全冠修复可选择氧化锆陶瓷,前牙区全冠修复可以根据患者的美学需求选择高透性氧化锆陶瓷或玻璃陶瓷。⑤贴面、嵌体和高嵌体修复可选择长石瓷、玻璃陶瓷和树脂陶瓷复合材料,但树脂陶瓷复合材料耐磨性差,需避免用于高应力承载区。⑥对牙本质暴露、氟斑牙和牙齿酸蚀症患者可考虑树脂纳米陶瓷材料,但这类患者适宜的陶瓷材料相关研究较少。⑦表面粗糙度对陶瓷材料的磨损性能有显著影响,临床口腔修复应用中采用良好的抛光表面可提高陶瓷材料磨损性能,而且对修复体进行定期复查也至关重要。     

用于牙科复合树脂的具有固位力外形的无机填料的研究

本文介绍了一类微细的复合式无机填料。由于具有特殊的表面结构，这类填料与复合树脂中的树脂基质之间有良好的结合力，因此称之为“具有固位力外形的无机填料”。用此类填料配制的试验性复合树脂，不仅其磨耗性能有明显的改善，而且其它机械性能也有不同程度的提高。     

血液灌流对硫线磷和硫酸阿托品的吸附作用

目的 定量研究血液灌流对有机磷农药硫线磷和其解毒药阿托品的吸附作用.方法 模拟临床血液灌流装置,对含硫线磷和硫酸阿托品的血样进行灌流吸附,分别用毛细管气相色谱法和高效液相色谱法测定硫线磷和硫酸阿托品的残留量.结果 吸附剂用量为0.5、1.0和1.5 g,包膜活性炭在灌流2.0 h后硫线磷的清除率均能达到90%以上,硫酸阿托品的清除率依次为61.9%、84.9%和88.9%;HA230树脂在灌流1.5 h后硫线磷清除率都达到90%以上,硫酸阿托品的清除率也依次高达88.0%、97.2%和98.4%;包膜活性炭灌流3.0h后,硫酸阿托品与硫线磷的比值最高为灌流前的10.1倍,而HA230树脂灌流后,此比值最高为灌流前的6.7倍.结论 包膜活性炭和HA230吸附树脂血液灌流1.5～2.0 h均能清除血中大部分硫线磷,而且均能增加血中硫酸阿托品和硫线磷浓度的比值.