A Tissue-Engineered Artificial Bile Duct Grown to Resemble The Native Bile Duct

The aim of this study was to fabricate an artificial bile duct for the development of a new treatment for biliary diseases. Eighteen hybrid pigs were implanted with a bile duct organoid unit (BDOU) made of a bioabsorbable polymer. Twelve of the transplanted BDOUs had been seeded with autologous bone marrow cells (BMCs) in advance. Six animals, the controls, were grafted with the scaffold alone with no BMCs seeded. The common bile duct was cut, the hepatic cut end of the native common bile duct was anastomosed to the BDOU and the other end was anastomosed to the duodenum. The controls underwent a similar operation. The neo-bile duct was removed at pre-determined time points and investigated histologically. All 18 recipient pigs survived until their sacrifice at 6 weeks, 10 weeks or 6 months. Histological examination revealed incomplete epithelialization of the neo-bile duct at 6 weeks and 10 weeks after transplantation. At 6 months, the organoid exhibited a morphology almost identical to that of the native common bile duct. No differences were found between the controls and BMC-seeded pigs. These results show that the artificial bile duct thus fabricated can serve as a substitute for the native bile duct.     

A clinical procedure to predict the value of temporary occlusion therapy in keratoconjunctivitis sicca

PURPOSE: To evaluate the effects of dissolvable collagen punctal plugs on the symptoms, tear stability and volume in aqueous deficient dry eyes. METHODS: Sixty-two aqueous deficient dry eye patients of mixed aetiology underwent lacrimal punctal occlusion with dissolvable collagen plugs. The subjects were randomly allocated to one of two treatment groups: group I (n = 36) had their lower puncta occluded and group II (n = 26) had both their upper and lower puncta occluded. The effectiveness of this treatment was clinically assessed by (1). scoring subject symptoms and (2). measuring the tear parameters of tear thinning time (TTT) and tear meniscus height (TMH) as indicators of tear stability and volume, respectively. Following baseline measurements, patients were reviewed at time intervals of 5 and 12 days post-occlusion. A group of age- and gender-matched normals (n = 45) was recruited for comparison (group III). RESULTS: Tear volume and stability were significantly higher in group III compared with I and II at baseline. In the treated groups on both days 5 and 12: (1). symptom score reduced significantly from a median value of 7 to 3 (p = <0.001); (2). tear stability increased significantly from a median value of 3 to 5 s by day 5 (p 相似文献   

Detection of electrocardiographic ‘left ventricular strain’ using neural nets

The use of artificial neural networks for classification of ST-T abnormalities of the electrocardiogram (ECG) was investigated. A training set of 356 lateral leads selected from 105 ECGs was visually classified as exhibiting one particular ST-T morphology (left ventricular (LV) strain) or not. Selected measurements, together with the classification, were fed as input to a three-layer software-based network during the learning process. The performance of the network was evaluated by comparing the results obtained from the network with conventional criteria, using two test sets. Set 1 comprised 63 lateral leads from 32 ECGs with ST-T changes showing atypical forms of LV strain. Set 2 consisted of 80 lateral leads from 20 ECGs containing normal and abnormal T-waves. For set 1, the network outperformed conventional criteria, having a higher sensitivity (96 per cent against 85 per cent) and specificity (67 per cent against 50 per cent). With test set 2, both network and conventional criteria were 100 per cent sensitive and 100 per cent specific. For sets 1 and 2 combined, the network had a higher overall sensitivity (97 per cent agaisst 89 per cent) and specificity (88 per cent against 82 per cent). The results suggest that neural networks may be useful in selected areas of electrocardiography, but care is required when selecting patterns for use in the training process.     

An Intrapleural Lung Prosthesis: Rationale, Design, and Testing

Abstract: Extracorporeal life support (ECLS or ECMO) is standard treatment for severe respiratory failure but poses many contraindications to future lung transplantation. The solution to this dilemma is the implantable gas exchange device (IGED) or artificial lung. Preliminary efforts to create such an artificial lung have been made since 1970 and include designs involving single devices, intravascular devices (i. e., IVOX), and combination heart–lung devices, Stringent requirements govern the design of such a device, the most important of which are high gas exchange efficiency, low resistance to blood flow, and size. This paper describes such a device. It incorporates large diameter inflow and outflow ports in close proximity and a low resistance wound hollow fiber core encapsulated in a compliant outer shell which conserves the work of the right ventricle. In a large animal model (adult sheep) this device was connected in line with the main pulmonary artery in series with the native lungs. This configuration has the advantages of using the lungs as an embolic filter, perfusing the lungs with fully oxygenated blood, and maintaining the integrity of the anatomy necessary for transplant. Laboratory experiments have run >8 h. Preliminary data show that the animals have remained hemodynamically stable while the devices have supported the animals completely by supplying 100% O₂ saturation with PO₂ values ranging from 250–350 mm Hg. Additionally, this model makes possible the study of respiratory failure without introducing other variables such as extracorporeal circuits or pumps. The other metabolic, endocrine, and reticuloendothelial functions of normal and injured lungs can now be studied more precisely by excluding these variables. Further studies are needed to evaluate this device in chronic (long–term implantation) experiments before clinical application.     

Sources of behavioral deviation modeled by early color preferences in quail. III. Developmental stability and normative canalization

Successful artificial selection of quail (C. coturnix japonica) for divergent early approach preferences for, and imprintabilities to, the wavelength characteristics of otherwise identical visual stimuli decreased the trait's developmental stability. The developmental error that resulted from selecting for extreme initial preferences was associated with enhanced imprintabilities. Conversely, the developmental error that resulted from selecting for extreme imprintabilities was associated with enhanced expression of directional gene effects in extreme initial preferences. The data are attributed to selectively relaxed normative canalization of trait development, and to related enhanced expression of genetic, environmental, and stochastic influences in trait deviations.     

Single-equation models for the tear film in a blink cycle: realistic lid motion.

We consider model problems for the tear film over multiple blink cycles that utilize a single equation for the tear film; the single non-linear partial differential equation that governs the film thickness arises from lubrication theory. The two models that we consider arise from considering the absence of naturally occurring surfactant and the case when the surfactant is strongly affecting the surface tension. The film is considered on a time-varying domain length with specified film thickness and volume flux at each end; only one end of the domain is moving, which is analogous to the upper eyelid moving with each blink. Realistic lid motion from observed blinks is included in the model with end fluxes specified to more closely match the blink cycle than those previously reported. Numerical computations show quantitative agreement with in vivo tear film thickness measurements under partial blink conditions. A transition between periodic and non-periodic solutions has been estimated as a function of closure fraction and this may be a criterion for what is effectively a full blink according to fluid dynamics.     

Ocular counterrolling induced by centrifugation during orbital space flight

During the 1998 Neurolab mission (STS-90), four astronauts were exposed to interaural centripetal accelerations (Gy centrifugation) of 0.5g and 1g during rotation on a centrifuge, both on Earth and during orbital space flight. Subjects were oriented either left-ear out or right-ear out, facing or back to motion. Binocular eye movements were measured in three dimensions using a video technique. On Earth, tangential centrifugation that produces 1g of interaural linear acceleration combines with gravity to tilt the gravitoinertial acceleration (GIA) vector 45° in the roll plane relative to the head vertical, generating a summed vector of 1.4g. Before flight, this elicited mean ocular counterrolling (OCR) of 5.7°. Due to the relative absence of gravity during flight, there was no linear acceleration along the dorsoventral axis of the head. As a result, during in-flight centrifugation, gravitoinertial acceleration was strictly aligned with the centripetal acceleration along the interaural axis. There was a small but significant decrease (mean 10%) in the magnitude of OCR in space (5.1°). The magnitude of OCR during postflight 1g centrifugation was not significantly different from preflight OCR (5.9°). Findings were similar for 0.5g centrifugation, but the OCR magnitude was approximately 60% of that induced by centrifugation at 1g. OCR during pre- and postflight static tilt was not significantly different and was always less than OCR elicited by centrifugation on Earth for an equivalent interaural linear acceleration. In contrast, there was no difference between the OCR generated by in-flight centrifugation and by static tilt on Earth at equivalent interaural linear accelerations. These data support the following conclusions: (1) OCR is generated predominantly in response to interaural linear acceleration; (2) the increased OCR during centrifugation on Earth is a response to the head dorsoventral 1g linear acceleration component, which was absent in microgravity. The dorsoventral linear acceleration could have activated either the otoliths or body-tilt receptors that responded to the larger GIA magnitude (1.4g), to generate the increased OCR during centrifugation on Earth. A striking finding was that magnitude of OCR was maintained throughout and after flight. This is in contrast to most previous postflight OCR studies, which have generally registered decreases in OCR. We postulate that intermittent exposure to artificial gravity, in the form of the centripetal acceleration experienced during centrifugation, acted as a countermeasure to deconditioning of this otolith-ocular orienting reflex during the 16-day mission. Electronic Publication     

Detection and deletion of motion artifacts in electrogastrogram using feature analysis and neural networks

Electrogastrogram is a surface measurement of gastric myoelectrical activity, and electrogastrography has been an attractive method for physiological and pathophysiological studies of the stomach due to its nonivasive nature. Motion artifacts, however, ruin the electrogastrogram (EGG), and make the analysis very difficult and sometimes even impossible. They must be eliminated from EGG signals before analysis. Up to now, this can only be done by visual inspection, which is not only time-consuming but also subjective. In this study, a method using feature analysis and neural networks has been developed to realize automatic detection and elimination of the motion artifacts in EGG recordings by computer. Experiments were conducted to investigate the characteristics of different motion artifacts. Useful features were extracted, and different combinations of the features used as the input of the neural network were compared to obtain the optimal performance for the detection of motion artifacts using the artificial neural network.     

硅凝胶人工晶体的生物相容性

本文参照国内外有关医用高分子材料的生物学评价试验方法,对国产医用级硅凝胶人工晶体作了系统的生物学评价。结果表明:硅凝胶人工晶体对眼及皮肤无刺激作用、无热原、无毒性、体外溶血率小于5％,对细胞生长有促进作用,长期植入皮下时,随植入时间延长,囊壁厚度逐渐变薄,炎性细胞反应30天基本消失。染色体及骨髓多染红细胞未受影响。因此,可以认为硅凝胶人工晶体有良好的生物相容性。     

Construction and characterization of centric circular and acentric linear chromosomes in fission yeast

Summary Gene disruption and gap repair of chromosomal DNA have been frequently employed techniques in yeast genetics. To extend the possibility of using these gene manipulations for larger genomic regions, we have examined the maximal sizes of chromosomal DNA disrupted or repaired in vivo. Here we report a simple, potentially general, method for selectively deleting a 150 kb region, or gap-filling a 100 kb region, in the fission yeast genome. This enables the generation of acentric linear chromosomes by deletion, or the cloning of large functional centromeric DNAs into circular minichromosomes by gap-filling. The fidelity of the resulting gap-filling is high, judging from partial-digestion mapping of gap-repaired DNAs. By analysing a series of such circular minichromosomes, we conclude that only a part of the repetitive centromeric region, including the central domain, is essential for mitotic and meiotic chromosome segregation. Acentric linear chromosomes, although unstable, could be maintained, indicating that it may be possible to construct an acentric vector for large DNA fragments in this organism.