Branches of the thoracic sympathetic trunk in the human fetus

Summary The segmental organization of the thoracic sympathetic trunk and all its ramifications was studied in 6 human fetuses (16–22 weeks) by means of the acetylcholinesterase in toto staining method. Each trunk was divided into 12 sympathetic segments. A segment is defined as that part of the sympathetic trunk which is connected via its rami communicates with one spinal nerve, without discriminating between grey and white rami. The diameter of the rami communicantes and their direction towards the spinal nerves are variable. The number of peripheral segmental ramifications of the trunk is much larger than assumed previously. Each thoracic sympathetic segment gives off at least 4–5 nerves. Three categories of nerves are discerned: (1) large splanchnic rootlets confined to the greater, lesser and least thoracic splanchnic nerves, (2) medium-sized splanchnic nerves directed towards thoracic viscera, some of which give off branches towards costovertebral joint plexuses and, described for the first time in man, (3) small nerves which ramify extensively and form nerve plexuses in the capsule of the costovertebral joints. The majority of the ramifications is formed by the nerves of the third category. The existence of Kuntz's nerve, connecting the 2nd intercostal nerve and 1st thoracic spinal nerve, is confirmed in four specimens. The nerve plexuses of the costovertebral joints receive a segmentally organized innervation: they receive their input from the neighbouring sympathetic segment and the one cranial to it.It is concluded that the thoracic sympathetic branches in man show a complex, segmentally organized pattern and may have a considerable component of somatosensory nerve fibers. The complex relationships must be taken into account in surgical sympathectomies.     

颞下颌关节与颅面指标的计算机相关及回归分析

本文用计算机分析统计了118例(236侧)颞下颌关节的12项骨性指标及10项颅面指标的正常值及相关关系。结果表明颞下颌关节各项指标之间、颞下颌关节与颅面各主要指标之间,均存在良好的相关关系。说明颞下颌关节,特别是关节窝和髁突的形态大小具有明显的规律性。由于颅面诸指标与颞下颌关节主要指标之间高度相关,因而本文用逐步回归方法,建立了由颅面特征指标推算髁突形态的回归方程。本文的结果可为该关节的形态研究及人工关节的设计和应用提供有益的依据。     

掌指关节的三维解剖及形态分析

目的：观测掌指关节关节面的几何形态,为人工关节的设计和应用提供解剖学依据。方法：10只成人手标本,解剖掌指关节,测量侧副韧带起点距掌骨头关节面的直线距离,三维数据检测仪获得关节面三维坐标数据,应用SPSS软件进行统计分析和成像。结果：掌骨头有双髁结构,桡侧髁略大,第1掌骨头形态特殊;各掌骨头高度的比较无显著差异;其掌侧关节面大于背侧,第2、3掌骨头关节面面积明显较大。近节指骨底在形态、高度和面积方面各序列相似;各序列侧副韧带起点桡侧较尺侧距离掌骨头关节面远。结论：手指人工关节的设计应符合解剖形态,并根据各序列形态的差异进行个体化设计,尤其拇指更应区别对待;手指人工关节的设计和应用中应注意软组织保护,关节的切除范围应注意保留侧副韧带的起止点。     

Source of the slippage in the universal joints of the Hoffmann external fixator

An investigation was conducted to determine what improvements in the resistance to slippage could be obtained in selected interfaces (rod/clip torsional, cheek/bowl and cheek/clip) of the Hoffmann external fixator. The modification involved changing the standard wing-nut clamp for a bolt with a thread of 7 mm and a 1 mm pitch and placing an FAG 28–303 thrust-bearing (needle roller and cage assembly) between the bolt and the cheek. The results showed a significant improvement in the slippage values of all interfaces; increases of approximately six times were obtained at all torque values of the wing-nut clamp or fastener tested. Such improvements would markedly increase the reliability of external fixation systems and thus reduce the incidence of loss-of-reduction of fracture due to slippage of the universal joint.     

Fooling the brain into thinking it sees both hands moving enhances bimanual spatial coupling

This study examined the hypothesis that the mirror reflection of one hands movement directly influences motor output of the other (hidden) hand, during performance of bimanual drawing. A mirror was placed between the two hands during bimanual circle drawing, with one hand and its reflection visible and the other hand hidden. Bimanual spatial coupling was enhanced by the mirror reflection, as shown by measures of circle size. Effects of the mirror reflection differed significantly from effects of vision to one hand alone, but did not differ from a control task performed in full vision. There was no evidence of a consistent phase lead of the visible hand, which indicates that the observed effects on spatial coupling were immediate and not based on time-consuming feedback processes. We argue that visual mirror symmetry fools the brain into believing it sees both hands moving rather than one. Consequently, the spatial properties of movement of the two hands become more similar through a process that is virtually automatic.     

Study of the carrying angle of the human elbow joint in full extension: a morphometric analysis

This study measured the carrying angle of the elbow joint in full extension in 600 students, using the supplementary angle to that between the longitudinal axis of the arm and that of the forearm. The mean carrying angle was 12.88°±5.92: 10.97°±4.27 in men and 15.07°±4.95 in women. The carrying angle changes with skeletal growth and maturity. The angle is always greater on the side of the dominant hand. We confirmed the inverse relationship between the carrying angle and the intertrochanteric diameter. Also, the type of constitution influences the value of the carrying angle, especially in women.     

The time course of cross-talk during the simultaneous specification of bimanual movement amplitudes

 We investigated the time course of the amplitude specification of rapid bimanual reversal movements (lateral displacements on two digitizers). To this end we used the timed-response paradigm in which the response has to be initiated synchronously with an auditory signal. Information about the required amplitudes was presented at various times before the synchronization signal. Consistent with previous results, the progression of amplitude specification was reflected in the dependence of the amplitudes of the reversal movements on the time interval between amplitude information and synchronization signal. Same or different amplitudes for the hands were used to examine cross-talk at the programming level of the two-level model of intermanual interference. The results indicate the existence of cross-talk in particular at short intervals between information about amplitude and movement initiation. This is consistent with the notion that cross-talk between concurrent processes of amplitude specification is transient and vanishes as the time available for motor programming increases. Received: 28 August 1996 / Accepted: 10 July 1997     

Voluntary Heart Rate Control During Static Muscular Effort

To test the hypothesis that voluntary heart rate (HR) control is possible with simultaneous muscular effort, 8 male subjects were trained in feedback assisted bidirectional HR control, and also practiced hand grip exercises requiring different levels of effort for 3 consecutive daily sessions. In a fourth session subjects were required to increase and decrease HR while simultaneously performing muscle contractions of 0%, 10%, 30% and 50% of maximum voluntary contractions. Substantial and reliable variations in HR were produced by instructions and by muscular effort during the first 3 sessions; and in the fourth session bidirectional HR control continued even with the relatively elevated baselines induced by muscular effort. Concomitant chin EMG levels did not vary with degree of muscular effort nor with instructions to increase or decrease HR, but increased over the course of any type of trial. Discussion suggests the use of artificially elevated baselines as a strategy for studying HR deceleration and concludes that the present study provides strong evidence of subjects' abilities to voluntarily control HR during muscular effort. This conclusion lends support to the notion that biofeedback therapies may be of clinical utility in real life by modulating the eliciting effects of stressors.     

Die Beanspruchung des menschlichen Ellenbogengelenks

Zusammenfassung Bei 80 Objekten werden die Gelenkflächen des menschlichen Ellenbogengelenks untersucht. Die Trochlea und das Capitulum humeri sowie das Caput radii zeigen keine nennenswerten Unterschiede in der Ausdehnung der mit typischem Gelenkknorpel bedeckten Flächen. Dagegen lassen sich für die Ulnazange drei charakteristische Formgruppen abgrenzen: In 3 Fällen kann eine einheitliche Knorpelfläche beobachtet werden. Bei etwa zwei Drittel der untersuchten Objekte liegt im mittleren Bereich der Incisura trochlearis in horizontaler Richtung ein 2–5 mm breiter knorpelfreier Streifen, der den Gelenkknorpel in 2 vollständig getrennte Flächen unterteilt. Das restliche Drittel der Objekte besitzt eine unvollständige Trennung der Gelenkfläche. Unter Berücksichtigung der Vorstellungen von Pauwels über die causale Histogenese der mesenchymalen Stützgewebe sowie der Materialverteilung im Knochengewebe in Abhängigkeit von der einwirkenden Spannungsgröße werden die morphologischen Befunde den für die jeweiligen Skeletelemente von Pauwels ermittelten Spannungsdiagrammen gegenübergestellt. An der Trochlea und dem Capitulum humeri und am Caput radii findet sich eine geradezu ideale Übereinstimmung in der Ausdehnung der Knorpelfläche und der Knochendichte unter den Gelenkflächen mit den entsprechenden Spannungsdiagrammen. An der Ulna trifft dies nur für einen geringen Teil der Objekte zu. Für die unterschiedliche Ausgestaltung der Incisura trochlearis werden zwei mögliche Ursachen diskutiert: 1. die Resultierende R verharre während des Bewegungsablaufes in einzelnen Positionen innerhalb der Incisura trochlearis verschieden lange; 2. der Krümmungsradius der Trochlea humeri sei größer als derjenige im mittleren Bereich der Ulnazange, so daß hier wegen des fehlenden Kontaktes der Gelenkflächen keine Druckübertragung möglich ist.

---

The stress of the human elbow jointI. Functional morphology of the articular surfaces

Summary The articular surfaces of 80 human elbow joints are analysed. The trochlea and capitulum humeri and the caput radii of the investigated individuals show no particular differences in the extent of their surfaces covered with typical articular cartilage. On the other hand the form of the incisura trochlearis is rather variable. Three characteristic formgroups are to be discerned. In three objects a continuous cartilage surface has been observed. In 50 of the investigated joints there is a small intersection free from cartilage in the midst of the incisura trochlearis, dividing the articular cartilage in two isolated surfaces. In the rest of the analysed objects the articular surface is divided only partially. According to Pauwels' hypothesis on the causal histogenesis of the mesenchymal supporting tissues and of the density distribution of the bone dependence upon the magnitude of the local unit stress the morphological findings in the single investigated parts of the elbow joint are confronted with the corresponding stress diagram as described by Pauwels. In the trochlea and capitulum humeri and in the caput radii a nearly ideal correspondence of the extent of the articular surface and the density of the bone tissue with the unit stress diagrams are found. In the ulna this correspondence exists only in few of the analysed objects. For the different form of the incisura trochlearis two possible explanations are discussed: 1, during the motion the resultant of forces may stay for a different time in their single positions in the incisura trochlearis; 2. the curvature radius of the trochlea humeri may be greater than that one of the incisura trochlearis in the central area. So no pressure occurs in this part of the articular surface.

Mit freundlicher Unterstützung durch die Deutsche Forschungsgemeinschaft.     

Morphomechanics of the humero-ulnar joint: II. Concave incongruity determines the distribution of load and subchondral mineralization

Background: A deeper joint socket (concave incongruity) is found at most angles of flexion of the humero-ulnar joint and maintained over a wide range of physiological loading. It is, however, unclear how far this incongruity affects the distribution of load and subchondral mineralization of this joint as compared with a congruous configuration. Methods: Two nonlinear, axisymmetrical finite element models with two cartilage layers were constructed, one congruous and one incongruous, with a joint space of realistic magnitude. The distribution of subchondral mineralization was determined by computed tomography osteoabsorptiometry in the same six specimens that were investigated in the first part of the study, and compared with the biomechanical data obtained there and the predictions of the models. Results: In the congruous case, the center of the socket is highly loaded, whereas the periphery does not experience mechanical stimulation. A central bone density maximum is predicted. With concave incongruity the position of the contact areas shifts from the joint margin towards the center as the load increases, and the peak stresses are considerably lower. A bicentric ventro-dorsal distribution pattern of subchondral mineralization is predicted, and this is actually found in the six specimens. Conclusions: Concave incongruity is shown to determine load transmission and subchondral mineralization of the humero-ulnar joint. It is suggested that this shape leads to a more even distribution of stress, provides intermittent stimulation of the cartilaginous tissue, and has beneficial effects on the metabolism, nutrition, and lubrication of the articular cartilage during cyclic loading. © 1995 Wiley-Liss, Inc.