Adult Renal Cell Carcinoma: A Review of Established Entities from Morphology to Molecular Genetics

According to the current World Health Organization (WHO), renal cell carcinomas (RCCs) that primarily affect adults are classified into 8 major subtypes. Additional emerging entities in renal neoplasia have also been recently recognized and these are discussed in further detail by Mehra et al (Emerging Entities in Renal Neoplasia, Surgical Pathology Clinics, 2015, Volume 8, Issue 4). In most cases, the diagnosis of a RCC subtype can be based on morphologic criteria, but in some circumstances the use of ancillary studies can aid in the diagnosis. This review discusses the morphologic, genetic, and molecular findings in RCCs previously recognized by the WHO, and provides clues to distinction from each other and some of the newer subtypes of RCC. As prognosis and therapeutic options vary for the different subtypes of RCC, accurate pathologic distinction is critical for patient care.     

一次性湿热交换器在新生儿机械通气长途转运中应用的效果分析

目的探讨研究一次性湿热交换器在新生儿机械通气长途转运中应用的临床意义。方法 2017年1月-2017年12月,我院120转运中心长途转运接收786例机械通气新生儿,786例患儿随机分为常规气道护理(对照组)和转运途中应用一次性湿热交换器组(治疗组),对比转运过程中的吸痰次数、肉眼可见痰痂形成率、堵管发生率、脱管发生率、人机对抗发生率。结果研究数据显示治疗组吸痰次数、肉眼可见痰痂形成率、堵管发生率、脱管发生率、人机对抗发生率有显著性差异(P<0.05)明显低于对照组。结论在机械通气新生儿长途转运中,一次性湿热交换器的可减少转运患儿吸痰次数发生率、降低肉眼可见痰痂形成率、堵管发生率、脱管发生率、人机对抗发生率具有明显优越性,值得推广。     

Inactivated influenza vaccine formulated with single-stranded RNA-based adjuvant confers mucosal immunity and cross-protection against influenza virus infection

Influenza vaccination is considered the most valuable means to prevent and control seasonal influenza infections, which causes various clinical symptoms, ranging from mild cough and fever to even death. Among various influenza vaccine types, the inactivated subunit type is known to provide improved safety with reduced reactogenicity. However, there are some drawbacks associated with inactivated subunit type vaccines, with the main ones being its low immunogenicity and the induction of Th2-biased immune responses. In this study, we investigated the role of a single-stranded RNA (ssRNA) derived from the intergenic region in the internal ribosome entry site of the Cricket paralysis virus as an adjuvant rather than the universal vaccine for a seasonal inactivated subunit influenza vaccine. The ssRNA adjuvant stimulated not only well-balanced cellular (indicated by IgG2a, IFN-γ, IL-2, and TNF-α) and humoral (indicated by IgG1 and IL-4) immune responses but also a mucosal immune response (indicated by IgA), a key protector against respiratory virus infections. It also increases the HI titer, the surrogate marker of influenza vaccine efficacy. Furthermore, ssRNA adjuvant confers cross-protective immune responses against heterologous influenza virus infection while promoting enhanced viral clearance. Moreover, ssRNA adjuvant increases the number of memory CD4⁺ and CD8⁺ T cells, which can be expected to induce long-term immune responses. Therefore, this ssRNA-adjuvanted seasonal inactivated subunit influenza vaccine might be the best influenza vaccine generating robust humoral and cellular immune responses and conferring cross-protective and long-term immunity.     

Heteroepitaxy of Cerium Oxide Thin Films on Cu(111)

An important part of fundamental research in catalysis is based on theoretical and modeling foundations which are closely connected with studies of single-crystalline catalyst surfaces. These so-called model catalysts are often prepared in the form of epitaxial thin films, and characterized using advanced material characterization techniques. This concept provides the fundamental understanding and the knowledge base needed to tailor the design of new heterogeneous catalysts with improved catalytic properties. The present contribution is devoted to development of a model catalyst system of CeO₂ (ceria) on the Cu(111) substrate. We propose ways to experimentally characterize and control important parameters of the model catalyst—the coverage of the ceria layer, the influence of the Cu substrate, and the density of surface defects on ceria, particularly the density of step edges and the density and the ordering of the oxygen vacancies. The large spectrum of controlled parameters makes ceria on Cu(111) an interesting alternative to a more common model system ceria on Ru(0001) that has served numerous catalysis studies, mainly as a support for metal clusters.     

扬州地区肝硬化食管静脉曲张初次出血80例患者诊治分析

目的探讨扬州地区肝硬化食管静脉曲张初次出血患者诊治特点。方法回顾性分析2010年1月-2013年12月苏北人民医院消化内科收治的80例肝硬化食管静脉曲张初次出血患者病例资料。计数资料用率或构成比表示,率的比较采用χ2检验。结果由乙型肝炎导致肝硬化所引起的食管静脉曲张破裂出血所占比例最大;三腔二囊管临床运用可最大限度地挽救患者生命,为后期治疗提供时间;基础治疗包括止血、输血、抑酸、补液等,后期以硬化剂、套扎、硬化剂+套扎、手术、经颈静脉肝内门体分流术(TIPS)为主,但套扎运用最为广泛;患者出血初期各项指标变化有利于指导临床治疗,对患者预后具有良好的评估作用。结论扬州地区肝硬化引起的食管静脉曲张破裂出血病因呈现复杂交叉性,治疗方法仍需进一步完善,以达到个体化治疗水平;及时正确的救治,对提高临床疗效、降低病死率有重要意义;早期的健康体检,对疾病诊治起关键性的作用。     

Lesion regression rate based on RECIST: prediction of treatment outcome in patients with head and neck cancer treated with chemoradiotherapy compared with FDG PET-CT

The aim of this study was to evaluate whether the lesion regression rate (ΔLR) based on the Response Evaluation Criteria in Solid Tumors (RECIST) criteria could be used for the prediction of treatment outcome in head and neck squamous cell carcinoma (HNSCC) patients treated with chemoradiotherapy (CRT) compared with FDG PET-CT. A total of 33 patients underwent MRI and PET-CT at pretreatment and at 8 weeks after CRT. We assessed the treatment outcome by analyzing the following parameters: the RECIST criteria, ΔLR, the European Organization for Research and Treatment of Cancer (EORTC) criteria, and pretreatment SUV_max of the primary tumor and node. The correlation between the analysis of the parameters and the results of the long-term follow-up of the patients was determined. The RECIST did not significantly correlate with locoregional control (LRC) or survival. The ΔLR was significantly lower for the lesions with locoregional failure (LRF) than for those with LRC. A threshold ΔLR of 48% revealed a sensitivity of 72.7% and specificity of 77.3% for the prediction of LRF. Progression-free survival (PFS) of patients with ΔLR ≥ 48% was significantly better than that of patients with ΔLR < 48% (P = 0.001), but not overall survival. There was a significant correlation between LRC and the EORTC (P = 0.02). The patients who achieved a complete response by the EORTC criteria showed significantly better PFS and overall survival (P = 0.01 and 0.04, respectively). The ΔLR was inferior to FDG PET-CT with respect to the prediction of patient survival; however, it may be useful for selecting patients in need of more aggressive monitoring after CRT.     

Current status and challenges of Additive manufacturing in orthopaedics: An overview

Additive manufacturing is a rapidly emerging technology which is being successfully implemented in the various field of medicine as well as in orthopaedics, where it has applications in reducing cartilage defects and treatments of bones. The technology helps through systematic collection of information about the shape of the "defects" and precise fabrication of complex 3D constructs such as cartilage, heart valve, trachea, myocardial bone tissue and blood vessels. In this paper, a large number of the relevant research papers on the additive manufacturing and its application in medical specifically orthopaedics are identified through Scopus had been studied using Bibliometric analysis and application analysis is undertaken. The bibliometric analysis shows that there is an increasing trend in the research reports on additive manufacturing applications in the field of orthopaedics. Discussions are on using technological advancement like scanning techniques and various challenges of the orthopaedic being met by additive manufacturing technology. For patient-specific orthopaedic applications, these techniques incorporate clinical practice and use for effective planning. 3D printed models printed by this technology are accepted for orthopaedic surgery such as revision of lumbar discectomy, pelvic surgery and large scapular osteochondroma. The applications of additive manufacturing in orthopaedics will experience a rapid translation in future. An orthopaedic surgeon can convert need/idea into a reality by using computer-aided design (CAD) software, analysis software to facilitate the manufacturing. Thus, AM provides a comprehensive opportunity to manufacture orthopaedic implantable medical devices.     

Imaging Features of Pulmonary Immune-related Adverse Events

Pulmonary immune-related adverse events represent rare but potentially severe side effects of immunotherapies. Diagnosis is often challenging, as symptoms and imaging features are not specific and may mimic other lung diseases, thus potentially delaying appropriate patient management. In this setting, an accurate imaging evaluation is essential for a prompt detection and correct management of these drug-induced lung diseases. The purpose of this article is to review the different types of pulmonary immune-related adverse events, describe their imaging characteristics on both high-resolution computed tomography and positron emission tomography/computed tomography and stress their underlying diagnostic challenge by presenting the mimickers.