Comparison of augmented and non-augmented anterior cruciate ligament reconstruction combined with high tibial osteotomy

In a follow-up study 27 patients were evaluated after anterior cruciate ligament (ACL-)reconstruction combined with high tibial osteotomy because of chronic rupture of the ACL, cartilaginous lesions of the medial compartment and varus malalignment. They were divided into two groups. In 14 patients (non-LAD group) ACL reconstruction was performed using the central third of the autologous patellar tendon modified according to Eriksson-Trillat. Thirteen patients (LAD group) underwent repair with the same technique, but a Kennedy ligament augmentation device (LAD) in hot dog technique and fixed over the top was added. The postoperative treatment was the same in both groups. All patients were examined according to IKDC criteria. KT-1000 arthrometer testing at maximum manual traction was performed. Although the mean follow-up interval was more than double in the non-LAD group (non-LAD: 127 months vs LAD: 58 months), the subjective and clinical results, IKDC evaluation and KT-1000 arthrometer testing results were similar, showing no statistically significant difference. Further, no complications due to the use of LAD occurred. In this study no evident functional or clinical advantage from the augmentation performed could be shown.Investigation performed at the Department of Orthopaedic and Trauma Surgery, University Hospital Basle, Switzerland. No benefits in any form have been received or will be received from a commercial party related directly or indirectly to the subject of this article. Funds were received in total or partial support of the research or clinical study presented in this article. The funding sources were SUVA Assurance, Lucerne, and the science fund of the University Hospital Basle     

Digital cutting guide and endoscopically-assisted vertical ramus osteotomy to treat condylar osteochondroma: a long-term study

We have introduced an effective treatment for mandibular condylar osteochondroma with a digital cutting guide and endoscopically-assisted vertical ramus osteotomy (VRO). Eleven patients with unilateral condylar osteochondroma, who did not require orthognathic surgery or had less than 3 mm deviation of the chin and a stable occlusion, were treated during the period April 2013–January 2017 with a digital cutting guide and endoscopically-assisted VRO. Clinical data collected included the occlusion, facial contour, and maximum mouth opening (MMO). Computed tomographic (CT) scans were taken before and after operation. Two patients also had additional shaping of the mandibular contour. The pathological diagnosis was confirmed to be osteochondroma in all cases. A mean (range) 19 (12–40) months of follow-up for all 11 cases showed stable postoperative occlusion and facial aesthetics. There were no functional disturbances, recurrence, or condylar absorption. VRO is an alternative to orthognathic surgery for patients with osteochondroma who do not have severe malocclusions. The digital cutting guide and endoscopically-assisted VRO make it possible to achieve precise resection of the tumour and maintain the occlusion with minimal invasion.     

Mechanical Overload of a Single Compartment Induces Early Degenerative Changes in the Rabbit Knee: A Preliminary Study

The purpose of this experiment was to determine whether mechanical overload of a single compartment of the knee in rabbits via proximal tibial osteotomy could produce early changes consistent with degenerative arthritis. Ten New Zealand white female rabbits were allocated into two groups. Group 1 (five animals) underwent a right 20° valgus proximal tibial osteotomy to overload the lateral compartment of the knee. Group 2 (five animals) underwent a tibial osteotomy without malalignment (sham controls). The osteotomies were stabilized with a mini AO/ASIF plate and screws, allowing early mobilization. The left leg in each animal was left intact and served as a control. Animals were sacrificed after 3 months. Histological grading of the cartilage was performed according to Mankin et al. The mean histological gradings for the right minus the left knee were the same for the lateral and medial compartments in the 0° sham osteotomy group. However, the mean histological grading of the “overloaded” lateral compartment was 2.4 times greater than the medial compartment in the 20° valgus osteotomy group. These findings suggest that histological evidence of degenerative changes can be surgically induced in the rabbit knee by creating a biomechanical overload of one compartment     

Change in gait after high tibial osteotomy: A systematic review and meta-analysis

We conducted a meta-analysis to analyze how high tibial osteotomy (HTO) changes gait and focused on the following questions: (1) How does HTO change basic gait variables? (2) How does HTO change the gait variables in the knee joint? Twelve articles were included in the final analysis. A total of 383 knees was evaluated. There were 237 open wedge (OW) and 143 closed wedge (CW) HTOs. There were 4 level II studies and 8 level III studies. All studies included gait analysis and compared pre- and postoperative values. One study compared CWHTO and unicompartmental knee arthroplasty (UKA), and another study compared CWHTO and OWHTO. Five studies compared gait variables with those of healthy controls. One study compared operated limb gait variables with those in the non-operated limb. Gait speed, stride length, knee adduction moment, and lateral thrust were major variables assessed in 2 or more studies. Walking speed increased and stride length was increased or similar after HTO compared to the preoperative value in basic gait variables. Knee adduction moment and lateral thrust were decreased after HTO compared to the preoperative knee joint gait variables. Change in co-contraction of the medial side muscle after surgery differed depending on the degree of frontal plane alignment. The relationship between change in knee adduction moment and change in mechanical axis angle was controversial. Based on our systematic review and meta-analysis, walking speed and stride length increased after HTO. Knee adduction moment and lateral thrust decreased after HTO compared to the preoperative values of gait variables in the knee joint.     

Changes in load-bearing area after Ganz periacetabular osteotomy

Background and purpose?Implant dislocation is one of the commonest complications following primary total hip replacement (THR). We investigated the effect of body mass index (BMI) and tobacco use on the risk of this complication.

Subjects and methods?Through linkage between the Swedish Construction Workers’ cohort and the Swedish Inpatient Register, 2,106 male patients who had undergone primary THR between 1997 and 2004 were identified. We used Cox multivariable regression analysis to study the association between BMI and tobacco use and the risk of implant dislocation.

Results?53 patients (2.5%) developed implant dislocation during a mean of 2 (0–3) years of follow-up. We found overweight and obesity to be associated with increased risk of implant dislocation (HR = 2.5,95% CI: 1.1–5.5 and HR = 3.7, 95% CI: 1.5–9.3, respectively as compared to those of normal weight). There was no statistically significant association between tobacco use and the risk of dislocation.

Interpretation?Greater attention should be given to high BMI as a risk factor for implant dislocation following THR.     

Applications of the transfibular approach to the hindfoot: A systematic review and description of a preferred technique

BackgroundThe indications and technique for the transfibular approach to the tibiotalar joint have evolved since its initial popularization in 1942. The purpose of this systematic review is to assess the indications, techniques, and postoperative outcomes among procedures performed with the transfibular approach.MethodsA comprehensive search of PubMed, Medline, and Embase databases from 1942 to 2018 was performed in accordance with PRISMA guidelines. After an initial broad search of transfibular approach indications, articles were stratified into 4 major surgical categories for assessment: (1) tibiotalar arthrodesis (2) tibiotalocalcaneal arthrodesis (3) total ankle replacement and (4) distal tibial tumor excision. Data was analyzed according to these 4 categories.ResultsA total of 32 studies (874 ankles) were included. Fibular non-union rates were 0.7 % (5 of 672) across all studies, 0.6% (2 of 329) for tibiotalar arthrodesis, 0.0% (0 of 12) for tibiotalocalcaneal arthrodesis, 1.0 % (3 of 296) for total ankle arthroplasty and 0.0% (0 of 15) for other procedures. Rates of deep infection were 2.5% (23 of 903) across all studies, 3.2% (15 of 466) for tibiotalar arthrodesis, 3.7% (4 of 106) for tibiotalocalcaneal arthrodesis, 1.3% (4 of 296) for total ankle arthroplasty, and 0.0% (0 of 15) for other procedures.ConclusionsThe transfibular approach is useful for cases requiring extensile exposure of the tibiotalar joint. This study provides evidence that the transfibular approach yields satisfactory results, with low complication and infection rates.Level of evidenceIV     

In vitro study of a modified sagittal split osteotomy fixation technique of the mandible: a mechanical test

This study was performed to evaluate the compressive mechanical strength of rigid internal fixation (RIF) using 1.5-mm L-shaped plates fixed with monocortical screws in sagittal split osteotomy (SSO). Thirty synthetic hemimandibles, which had all undergone a 5-mm advancement, were divided into three groups: three 12-mm bicortical titanium screws were placed in an inverted L pattern in group A; one straight 2.0-mm system spaced titanium plate fixed with four 5-mm monocortical screws was used in group B; two 1.5-mm system L-shaped titanium plates, each fixed with four 5-mm monocortical screws, were used in group C. The models were subjected to compressive and progressive mechanical tests with forces applied in the area between the second premolar and first molar to verify resistance in Newtons (N). A displacement speed of 1 mm/min was applied, with a maximum 10 mm displacement of the distal segment or until disruption of the fixation. The deformity and/or eventual rupture of the plates were evaluated, and consequently their technical stability was determined. The results showed that the modified fixation technique tested in this study on synthetic mandibles resulted in adequate stability and superior mechanical behaviour compared to simulated osteosynthesis with the use of a straight 2.0-mm titanium plate.