The relationship between muscle kinetic parameters and kinematic variables in a complex movement

Summary Kinematic variables of the vertical jump (jumping height, jump phase durations and joint angles) were measured on 39 male physical education students. In addition, kinetic parameters of the hip and knee extensors, and of the plantar flexors (maxima voluntary force and its rate of development) were recorded on the same subjects, in isometric conditions. The results demonstrated significant positive correlations between kinetic parameters of the active muscle groups and jumping height (r=0.217−0.464). The dominant effect on these correlations was due to the knee extensors. Correlations between these parameters and the duration of the jump phases were much weaker. Correlation coefficients between kinetic parameters and limb angles in the lowest body position showed that fast force production in one muscle group was related to a significant decrease in the joint angles of distant body segments. Multiple correlation coefficients between leg extensor parameters and kinematic variables (ranging between 0.256 for the duration of the counter-movement phase and 0.616 for jump height) suggested that kinetic parameters could explain more than a quarter of the variability of this complex human movement. Therefore, the conclusion was drawn that an extended set of measurements of the relevant musculo-skeletal system parameters could predict a considerable amount of the variability of human movement. However, high correlation coefficients between the same kinetic parameters of different muscle groups suggest that not all active muscle groups have to be included in the measurements.     

Integrative transformation of the mycotoxin-producing fungus,Penicillium paxilli

A high frequency transformation system has been developed for Penicillium paxilli using pAN7-1. Up to 44% of the primary transformants were heterokaryons. Loss of hygromycin resistance was observed in primary transformants that were sub-cultured on non-selective media, but single spores of these primary transformants were mitotically stable on both selective and non-selective media. A molecular analysis of the transformants generated showed that 78% had single-site integrations, with half of these containing a single copy of pAN7-1. CHEF-gel electrophoresis showed that P. paxilli has at least six chromosomes with a total genome size of about 23.4 Mb.     

EB病毒转化B淋巴细胞建立的永生细胞株长期传代遗传稳定性的研究

目的 研究EB病毒转化外周血B淋巴细胞建成的永生细胞株在传代过程中遗传特性是否发生改变.方法 对10株永生细胞株进行30代的长期传代培养,采用染色体显带、微卫星DNA及端粒酶活性检测技术,观察不同传代次数的永生细胞株二倍性、染色体核型、微卫星DNA及端粒酶活性的改变.结果 永生细胞株在30代以内,在染色体二倍性、核型、微卫星DNA方面保持稳定,未检测出端粒酶活性.结论 经EB病毒转化的永生细胞株在有限代次内遗传特征是稳定的.     

External fixation of unstable pelvic ring fractures: comparative rigidity of some current frame configurations

The effectiveness of external fixation in the stabilisation of pelvic ring fractures was studied in a laboratory cadaveric series. Shearing displacements occurring at sacroiliac joint and symphysis pubis dislocation sites, due to simplified longitudinal loading of the sacrum in an Instron unit, were monitored using variable-impedence transducers. The rigidity of fixation was compared for the Slätis and the Bonnel single anterior frames, for coupled and uncoupled double anterior frames, and for combined anterior-plus-posterior fixation achieved with separate transfixation pin clusters, with through-and-through pin clusters, or with a posterior screw plate. The data showed that the use of posterior fixation provided greatly enhanced stabilisation compared to that achieved with anterior fixation alone. The complex double anterior frames performed only slightly better than did the simpler single anterior frames. In no case, however, was it possible to recover rigidity levels approaching those of the intact pelvis. The results suggest that the transfixation pin arrangement is the most important determinant of pelvic fixation stability, and that further investigation of posterior screw-plate fixation is warranted.     

手术治疗46例胸腰椎爆裂骨折的临床分析

目的探讨前路、后路、前后路联合手术治疗胸腰椎爆裂骨折的特点。方法依据对患者所选择的前路、后路、前后路联合手术术式分为三组,进行影像学评价和神经功能评价。结果各组末次随访脊髓功能评价分级提高情况采用R×C表x2检查方法进行统计学分析,各组差异无显著意义。各组术后cobb氏角改善率应用秩和检验方法进行统计学分析,各组差异无显著意义。结论我们综合应用Denis和McAfee的分型,结合了骨折形态、损伤机制和稳定性评价,对胸腰椎爆裂骨折的治疗有较好的指导意义。手术方式的选择更多基于脊柱机械性稳定性、神经性稳定性评价。综合考虑骨折部位、骨折后时间、患者年龄、工种以及术者对入路的熟悉程度等。     

Length and moment arm of human leg muscles as a function of knee and hip-joint angles

Summary Lengths of muscle tendon complexes of the quadriceps femoris muscle and some of its heads, biceps femoris and gastrocnemius muscles, were measured for six limbs of human cadavers as a function of knee and hip-joint angles. Length-angle curves were fitted using second degree polynomials. Using these polynomials the relationships between knee and hip-joint angles and moment arms were calculated. The effect of changing the hip angle on the biceps femoris muscle length is much larger than that of changing the knee angle. For the rectus femoris muscle the reverse was found. The moment arm of the biceps femoris muscle was found to remain constant throughout the whole range of knee flexion as was the case for the medial part of the vastus medialis muscle. Changes in the length of the lateral part of the vastus medialis muscle as well as the medial part of the vastus lateralis muscle are very similar to those of vastus intermedius muscle to which they are adjacent, while those changes in the length of the medial part of the vastus medialis muscle and the lateral part of the vastus lateralis muscle, which are similar to each other, differ substantially from those of the vastus intermedius muscle. Application of the results to jumping showed that bi-articular rectus femoris and biceps femoris muscles, which are antagonists, both contract eccentrically early in the push off phase and concentrically in last part of this phase.     

Significance of the latissimus dorsi for shoulder instability. I. Variations in its anatomy around the humerus and scapula

In a cadaveric instability model that leaves all muscles intact initially, we studied anteroinferior glenohumeral dislocation behavior after section of the ligaments on the humeral side of the joint. In this study, the latissimus dorsi seemed to play a role when complete section did not result in a locked anteroinferior dislocation. We therefore initiated a study to test the hypothesis that the latissimus dorsi may, in certain circumstances, depending on variations in its anatomy, influence dislocation behavior. Here, in Part I, we present the results of the anatomic study of latissimus dorsi and its tendons. The anatomy of the latissimus dorsi pertaining to the scapula and humerus was studied in 100 cadaver specimens. The distance between the uppermost part of the tendon of both the latissimus dorsi and the teres major and the edge of the articular cartilage of the humeral head (tendon-cartilage distance, TCD) as well as the width and length of the tendons were measured. Furthermore, the relationship between latissimus dorsi and the inferior angle of the scapula was studied. The tendon of the latissimus dorsi inserted at a variable distance from the cartilage of the humeral head: the TCD ranged from 12.6 to 31.6 mm (mean 21.06 mm+/-5.11 mm). The latissimus dorsi can have muscular fibers arising from the inferior angle of the scapula (type 1 scapular connection, 43%). Alternatively, there may be only a few fibrous strands between the muscle and the scapula or there may be an intervening bursa (type 2 scapular connection, 57%). This variability in the morphology of the latissimus dorsi may be a factor explaining the differences observed in a study of humerus-based sequential cutting of the glenohumeral capsule. This possibility is explored in Part II of the study. The latissimus dorsi may also complete the tendinous protection of the humeral side of the capsule generally provided by the rotator cuff.     

Morphomechanics of the humero-ulnar joint: II. Concave incongruity determines the distribution of load and subchondral mineralization

Background: A deeper joint socket (concave incongruity) is found at most angles of flexion of the humero-ulnar joint and maintained over a wide range of physiological loading. It is, however, unclear how far this incongruity affects the distribution of load and subchondral mineralization of this joint as compared with a congruous configuration. Methods: Two nonlinear, axisymmetrical finite element models with two cartilage layers were constructed, one congruous and one incongruous, with a joint space of realistic magnitude. The distribution of subchondral mineralization was determined by computed tomography osteoabsorptiometry in the same six specimens that were investigated in the first part of the study, and compared with the biomechanical data obtained there and the predictions of the models. Results: In the congruous case, the center of the socket is highly loaded, whereas the periphery does not experience mechanical stimulation. A central bone density maximum is predicted. With concave incongruity the position of the contact areas shifts from the joint margin towards the center as the load increases, and the peak stresses are considerably lower. A bicentric ventro-dorsal distribution pattern of subchondral mineralization is predicted, and this is actually found in the six specimens. Conclusions: Concave incongruity is shown to determine load transmission and subchondral mineralization of the humero-ulnar joint. It is suggested that this shape leads to a more even distribution of stress, provides intermittent stimulation of the cartilaginous tissue, and has beneficial effects on the metabolism, nutrition, and lubrication of the articular cartilage during cyclic loading. © 1995 Wiley-Liss, Inc.     

Inability to activate muscles maximally during cocontraction and the effect on joint stiffness

In order to determine the maximum joint stiffness that could be produced by cocontraction of wrist flexor and extensor muscles, experiments were conducted in which healthy human subjects stabilized a wrist manipulandum that was made mechanically unstable by using positive position feedback to create a load with the characteristics of a negative spring. To determine a subject's limit of stability, the negative stiffness of the manipulandum was increased by increments until the subject could no longer reliably stabilize the manipulandum in a 1° target window. Static wrist stiffness was measured by applying a 3° rampand-hold displacement of the manipulandum, which stretched the wrist flexor muscles. As the load stiffness was made more and more negative, subjects responded by increasing the level of cocontraction of flexor and extensor muscles to increase the stiffness of the wrist. The stiffness measured at a subject's limit of stability was taken as the maximum stiffness that the subject could achieve by cocontraction of wrist flexor and extensor muscles. In almost all cases, this value was as large or larger than that measured when the subject was asked to cocontract maximally to stiffen the wrist in the absence of any load. Static wrist stiffness was also measured when subjects reciprocally activated flexor or extensor muscles to hold the manipulandum in the target window against a load generated by a stretched spring. We found a strong linear correlation between wrist stiffness and flexor torque over the range of torques used in this study (20–80% maximal voluntary contraction). The maximum stiffness achieved by cocontraction of wrist flexor and extensor muscles was less than 50% of the maximum value predicted from the joint stiffness measured during matched reciprocal activation of flexor and extensor muscles. EMG recorded from either wrist flexor or extensor muscles during maximal cocontraction confirmed that this reduced stiffness was due to lower levels of activation during cocontraction of flexor and extensor muscles than during reciprocal contraction.     

Sensitivity Analysis of Respiratory Parameter Estimates in the Constant-Phase Model

The constant-phase model is increasingly used to fit low-frequency respiratory input impedance (Zrs), highlighting the need for a better understanding of the use of the model. Of particular interest is the extent to which Zrs would be affected by changes in parameters of the model, and conversely, how reliable are parameters estimated from model fits to the measured Zrs. We performed sensitivity analysis on respiratory data from 6 adult mice, at functional residual capacity (FRC), total lung capacity (TLC), and during bronchoconstriction, obtained using a 1-25 Hz oscillatory signal. The partial derivatives of Zrs with respect to each parameter were first examined. The limits of the 95% confidence intervals, 2-dimensional pairwise and p-dimensional joint confidence regions were then calculated. It was found that airway resistance was better estimated at FRC, as determined by the confidence region limits, whereas tissue damping and elastance were better estimated at TLC. Airway inertance was poorly estimated at this frequency range, as expected. During methacholine-evoked pulmonary constriction, there was an increase in the uncertainty of airway resistance and tissue damping, but this can be compensated for by using the relative (weighted residuals) in preference over the absolute (unweighted residuals) fitting criterion. These results are consistent with experimental observation and physiological understanding.