Laser welded vascular anastomosis

Summary A comparative study was undertaken to investigate the application of a specially adapted microsurgical Neodymium Yag Laser system with a wavelength of 1,319 m and a CO₂ laser system for laser assisted microvascular end-to-end anastomosis (LAMA) of the rat femoral artery. Conventionally sutured anastomoses served as controls. Postoperative investigations included patency tests, light microscopy and tensile strength measurements. Both laser systems seem to be equally suitable for LAMA: The patency rates do not differ from those of sutured anstomoses and formation of microscopically small aneurysms occurred predominantly in control animals and only once in laser groups. The clamp time needed for LAMA was half the time that was needed for sutured anastomoses. Wound healing in all groups was similar with less fibrotic reactions and less foreign body granulomas in laser groups. At all intervals tensile strength was significantly higher for sutured anastomoses while differences between the CO₂- and the ND: Yag-laser groups were not statistically significant. Potential applications in urology include microvascular anastomoses in erectile dysfunction, pediatric and reconstructive urology.Contains parts of a dissertation     

Mechanical power during maximal treadmill walking and running in young and elderly men

This study determined mechanical power during movements specific to maximal walking and running using a non-motorized treadmill in 38 elderly [69.4 (5.0) years] and 50 young [24.3 (3.4) years] men. The mean mechanical power over a period of time covering six steps, during which the belt velocity peaked and then kept almost plateau, was determined as a performance score in each of maximal walking (WP) and running (RP). In terms of the value relative to body mass, the relative difference between the two age groups was greater for RP (61.7%) than for WP (21.4%) or isometric knee extension (34.1%) and flexion torque (43.8%). In the two groups, WP was significantly (P<0.05) correlated to knee extension (r=0.582 for the elderly and r=0.392 for the young) and flexion torque (r=0.524 for the elderly and r=0.574 for the young). Similarly, RP was also significantly (P<0.05) correlated to knee extension (r=0.627 for the elderly and r=0.478 for the young) and flexion torque (r=0.500 for the elderly and r=0.281 for the young). In these relationships, the WP adjusted statistically by thigh muscle torque was similar in the two age groups. However, the corresponding value for RP was significantly higher in the young than in the elderly. The findings here indicate that: (1) the difference between the young and elderly men in mechanical power is greater during maximal running than maximal walking, and (2) although the thigh muscle torque contributes to the power production during the two maximal exercise modes in the two age groups, the RP is greater in the young than in the elderly regardless of the difference in the thigh muscle torque.     

Isolation and characterization of subgenomic DNAs encapsidated in "single" T = 1 isometric particles of Maize streak virus

"Single" T = 1 isometric particles of Maize streak virus (MSV) have been isolated from infected maize leaves. Biochemical and genetic characterizations show that these particles contain subgenomic (sg) MSV DNA encapsidated by the MSV coat protein. The largest sg DNA is 1.56 kb, slightly larger than half genome size, although sg DNAs as small as 0.2 kb were also cloned. The sg DNAs are not infectious, and they do not appear to play a role in the pathogenicity of MSV. This is the first report of sg DNAs for MSV and, to our knowledge, the first time that encapsidated sg DNAs have been characterized at the sequence level for any geminivirus. These data will assist in our investigations into the role of genomic DNA in the formation of the unique geminate capsid architecture of the Geminiviridae.     

Physical loading and performance as predictors of back pain in healthy adults A 5-year prospective study

We investigated muscle strength, aerobic power, and occupational and leisure-time physical loading as predictors of back pain in a 5-year follow-up study. A cohort of 456 adults aged 25, 35, 45 and 55 years, free of back pain, participated in measurements of anthropometric characteristics, aerobic power and muscle strength characteristics at baseline. The subjects' levels and types of physical activity and occupational physical loading were also determined. At 5 years after the baseline examinations 356 of these subjects (78.1 %) were reached by mail, and 262 of them (73.6%) properly completed and returned a questionnaire including a detailed back pain history for the 5 years following the baseline measurements. Of this number 56 subjects (21 %) who reported back pain ( > 30 on a scale from 0 to 100) and functional impairment during the 5-year follow-up composed the marked back pain group. Other subjects (n = 71, 27%) noting lesser symptoms were included in the mild back pain group; 135 subjects (52%) reported having had no back pain. The subjects with marked back pain were on average taller than the subjects without back pain, while no such difference was found in body mass. Heavy occupational musculoskeletal loading (P = 0.005) and high general occupational physical demands (P = 0.036) predicted future back pain. Leisuretime physical activity, aerobic power or muscle strength characteristics were not predictive of future back pain.     

Passive hyperthermia reduces voluntary activation and isometric force production

It has been suggested that a critically high body core temperature may impair central neuromuscular activation and cause fatigue. We investigated the effects of passive hyperthermia on maximal isometric force production (MVC) and voluntary activation (VA) to determine the relative roles of skin (T_sk) and body core temperature (T_c) on these factors. Twenty-two males [O_2max=64.2 (8.9) ml kg^–1 min^–1, body fat=8.2 (3.9)%] were seated in a knee-extension myograph, then passively heated from 37.4 to 39.4°C rectal temperature (T_re) and then cooled back to 37.4^oC using a liquid conditioning garment. Voluntary strength and VA (interpolated twitch) were examined during an isometric 10-s MVC at 0.5°C intervals during both heating and cooling. Passive heating to a T_c of 39.4^oC reduced VA by 11 (11)% and MVC by 13 (18)% (P<0.05), but rapid skin cooling, with a concomitant reduction in cardiovascular strain [percentage heart rate reserve decreased from 64 (11)% to 29 (11)%] and psychophysical strain did not restore either of these measures to baseline. Only when cooling lowered T_c back to normal did VA and MVC return to baseline (P<0.05). We conclude that an elevated T_c reduces VA during isometric MVC, and neither T_sk nor cardiovascular or psychophysical strain modulates this response. Results are given as mean (SD) unless otherwise stated.     

骨水泥性能及其对人工关节柄固定强度的影响

本文研究了骨水泥三种不同临床使用方法所形成的内部气泡结构状态,测定了骨水泥的抗压强度、收缩率、疲劳强度、变形积累量等物理机械性能,以及关节固定强度,用气泡状态解释了不同临床使用方法对骨水泥性能及固定强度所带来的各种影响。     

Trajectory control in targeted force impulses

Summary This study was undertaken in order to determine the time course of the process by which information derived from a visual target is used to accurately set the amplitude of a simple motor response. We refer to this process as response specification. Separate auditory and visual cues were given to the subjects in order to independently control the moment of response initiation and the time available for processing amplitude information from the target. Six subjects initiated impulses of isometric force in synchrony with the last of predictable series of regular tones. Response amplitudes were to match one of three visual target steps occurring at random times between 0 and 400 ms before the response-synchronizing tone. Using these separate auditory and visual cues, we were able to systematically vary the time interval between target presentation and response onset, termed here Stimulus-Response or S-R interval. Target steps were presented in blocks of either predictable (simple condition) or unpredictable (choice condition) amplitudes. The peak forces and the peaks of their time derivatives were analyzed to determine how subjects achieved accuracy under the different conditions and at different S-R intervals. The trajectories of responses produced in the simple condition were independent of the S-R interval. In contrast, when targets were presented in unpredictable order, the distribution of the peak forces of the subjects' responses depended on the S-R interval. At short S-R intervals (<125 ms), subjects made responses whose peak forces were distributed around the center of the range of target steps. These responses formed a unimodal, but broad distribution which was independent of actual target amplitude. With increasing S-R interval (>125 ms), the distributions of peak forces gradually shifted toward the correct target amplitudes, with the means reaching the appropriate amplitudes at S-R intervals of 250–400 ms. At S-R intervals comparable to a reaction time, the range of peak forces was constricted to a similar extent as previously observed in a reaction time task (Hening et al. 1988). We found that the gradual improvement of accuracy was not achieved through changes in trajectory control: at all S-R intervals, subjects utilized a pulse-height control policy (Gordon and Ghez 1987a). Different peak forces were achieved by varying the rate of rise of force, while force rise time was held relatively invariant. We did find, however, that within the constraints imposed by rise time regulation, compensatory adjustments to the force trajectories (Gordon and Ghez 1987b) were greatest during the period of specification. We conclude that (1) subjects can initiate their responses independent of the degree of specification achieved and that the normal process of specification of amplitude begins earlier and continues longer than the latency of responses in a reaction time task; (2) before target presentation, subjects prepare a default response whose amplitude is biased by prior experience with the targets presented in the task. We hypothesize that the central mechanisms that specify response amplitude do so by a progressive adjustment of the default parameters.     

羟基磷灰石与骨界面抗张强度测试及扫描电镜观察

本文测试了孔隙率为１４％，孔径小于２μｍ的纯羟基磷灰石（ＨＡ）与兔胫骨皮质骨之间界面的抗张强度，２周时为０．７２ＭＰａ；４、８、１６周之间强度无明显差异平均为１．５ＭＰａ。扫描电镜观察表明，２周时拉伸断裂位于ＨＡ－骨界面，４周以后多在ＨＡ晶体颗粒之间。ＨＡ与骨生物适应性好，矿化组织可以直接沉着于ＨＡ表面或ＨＡ内部，近界面处的ＨＡ发生了一定的生物降解反应，且骨矿化与ＨＡ的降解可能达到某种平衡。     

Serum creatine kinase activity following forearm flexion isometric exercise

Summary The purpose of this study was to 1) compare serum creatine kinase (CK) activity following two forearm flexion isometric exercise regimens differing in work to rest ratio, and 2) examine the CK response to a repeated bout of isometric exercise. Eleven males were tested on two sessions (bouts) spaced 1 week apart. For bout 1, five subjects (group A) performed a forearm flexion isometric exercise consisting of 40 10-s maximal contractions with 20-s inter-trial rests (1020), while six (group B) performed 40 maximal 10-s contractions with 5-s inter-trial rests (105). The increase in serum CK activity following the 1020 exercise (143%) was significantly greater than that following the 105 exercise (52%). The 1020 exercise was also associated with greater tension generation over trials. One week later, both groups performed a bout of 1020 exercise. A substantial reduction in the serum CK response was found following this second bout. The data suggest that for bout 1 the isometric exercise associated with the greater overall tension levels resulted in the greater CK response. However, when the 1020 exercise was repeated 1 week later, a substantial reduction in the CK response was found which was unrelated to the tension generated.This study was supported by a University Faculty Research Grant No. 2-03021     

Effect of isometric and isokinetic muscle training on static strength and dynamic power

Summary This study investigated whether isokinetic strength training might induce changes in static and dynamic power already achieved as a result of isometric strength training. The subjects were twelve males. The isometric strength and dynamic power of elbow flexors were tested by means of an electric dynamometer and fly-wheel every two weeks. During the first 8 weeks all subjects trained the elbow flexors isometrically at four different positions of elbow joints. This training produced 27–36% gains in isometric strength and 34–46% in power. Thereafter the subjects were divided into two groups: the FG group who trained isokinetically at a fast velocity of 157·s^–1, and the SG group at slow velocity of 73·s^–1. After 6 weeks of training, the FG group produced a significant gain in power with light equivalent masses and the SG group did so with heavy equivalent masses. Neither group showed change in isometric strength.