Neutron reflectivity study of the swollen structure of polyzwitterion and polyeletrolyte brushes in aqueous solution

The swollen brush structures of polycation and zwitterionic polymer brushes, such as poly(2-methacryloyloxyethyltrimethylammonium chloride) (PMTAC), poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC), and poly[3-(N-2-methacryloyloxyethyl-N,N-dimethyl)ammonatopropanesulfonate] (PMAPS), in aqueous solutions of various ionic strengths were characterized by neutron reflectivity (NR) measurements. A series of the polyelectrolyte brushes were prepared by surface-initiated controlled radical polymerization on silicon substrates. A high-graft-density PMTAC brush in salt-free water (D₂O) adopted a two-region step-like structure consisting of a shrunk region near the Si substrate surface and a diffuse brush region with a relatively stretched chain structure at the solution interface. The diffuse region of PMTAC was reduced with increase in salt (NaCl) concentration. The PMAPS brush in D₂O formed a collapsed structure due to the strong molecular interaction between betaine groups, while significant increase in the swollen thickness was observed in salt aqueous solution. In contrast, no change was observed in the depth profile of the swollen PMPC brush in D₂O with various salt concentrations. The unique solution behaviors of zwitterionic polymer brushes were described.     

Effect of Preparation Taper,Height and Marginal Design Under Varying Occlusal Loading Conditions on Cement Lute Stress: A Three Dimensional Finite Element Analysis

The functional surfaces of the porcelain fused to metal fixed partial dentures are often abraded to adjust occlusion, such restorations are often found to fail in service. This study was therefore conducted to study the effect of surface abrasion on flexural strength of glazed porcelain fused to metal samples. It was also the aim of this study to find the effect of re-glazing on flexural strength of abraded samples. A total of ninety glazed porcelain fused to metal bar samples of the dimension 15 mm × 2 mm × 1.5 mm were fabricated. These samples were then divided into three groups (30 samples each) according to the surface treatments: group A-glazed (control); group B-abraded and group C-abraded and then re-glazed (self-glazed). Flexural strength was measured by using three point bend test on universal testing machine (texture analyser) with a cross-head speed of 0.6 mm/min. Peak force at the time of failure for all the samples was recorded. Statistical analysis found that mean flexural strength was highest for group A-80.65 ± 12.81 MPa; as compared to group B-74.18 ± 10.74 MPa and group C-77.85 ± 9.39 MPa. Student’s t test indicated that the difference in the flexural strength between groups A and B was significant while it was non-significant between groups B and C and also between groups A and C. The ‘f’ test indicated that the difference between the groups was non-significant. This study therefore showed that there is a marked decrease in the flexural strength of the porcelain fused to metal restorations after occlusal abrasion. The study also found that reglazing of these restorations may not restore their flexural strength significantly.     

The Effectiveness and Safety of Platelet-Rich Plasma for Chronic Wounds: A Systematic Review and Meta-analysis

ObjectiveTo evaluate the effectiveness and adverse events of autologous platelet-rich plasma (PRP) in individuals with lower-extremity diabetic ulcers, lower-extremity venous ulcers, and pressure ulcers.Patients and MethodsWe searched multiple databases from database inception to June 11, 2020, for randomized controlled trials and observational studies that compared PRP to any other wound care without PRP in adults with lower-extremity diabetic ulcers, lower-extremity venous ulcers, and pressure ulcers.ResultsWe included 20 randomized controlled trials and five observational studies. Compared with management without PRP, PRP therapy significantly increased complete wound closure in lower-extremity diabetic ulcers (relative risk, 1.20; 95% CI, 1.09 to 1.32, moderate strength of evidence [SOE]), shortened time to complete wound closure, and reduced wound area and depth (low SOE). No significant changes were found in terms of wound infection, amputation, wound recurrence, or hospitalization. In patients with lower-extremity venous ulcers or pressure ulcers, the SOE was insufficient to estimate an effect on critical outcomes, such as complete wound closure or time to complete wound closure. There was no statistically significant difference in adverse events.ConclusionAutologous PRP may increase complete wound closure, shorten healing time, and reduce wound size in individuals with lower-extremity diabetic ulcers. The evidence is insufficient to estimate an effect on wound healing in individuals with lower-extremity venous ulcers or pressure ulcers.Trial RegistrationPROSPERO Identifier: CRD42020172817     

Outline of a typology of men’s use of anabolic androgenic steroids in fitness and strength training environments*

Recent research into the use of anabolic androgenic steroids (AAS) in fitness and strength training environments have revealed great variance in users’ approach to AAS use and more specifically their approach to health risks and desired objectives. However, there have only been few attempts to develop theoretical frameworks directed at conceptualising the variance in AAS use. In this paper, we propose a unified framework in the form of a typology, which concerns men’s general approach to AAS use. The typology is based on sociologist Max Weber’s method on the ideal typology. The work comes out of the authors’ own qualitative empirical research on male AAS users in fitness and strength training environments, but is also related to and draws on the international literature on the subject. The suggested typology consists of four ideal types: the Expert type, the Well-being type, the YOLO type and the Athlete type. The four types are developed around two overarching categories, namely users’ approach to risk and effectiveness. The typology outlines distinct and characteristic approaches to AAS use and can, thus, be employed by researchers as well as health professionals as a heuristic tool for investigation and explanation.     

Effects of Adenosine Triphosphate (ATP) on Early Recovery After Total Knee Arthroplasty (TKA): A Randomized,Double-Blind,Controlled Study

Functional exercise after total knee arthroplasty (TKA) is necessary. However, it may be a difficult and painful process for the patient. Desirable methods of relieving the patient's pain are worth exploring. Oral supplement of adenosine triphosphate (ATP) is a potential option. In the present study, we decide to investigate whether short-term administration of ATP benefits patients undergoing TKA. A total of 244 subjects were randomized to receive 120 mg ATP or placebo each day for 4 weeks. Significant differences in quadriceps strength, pain scores at postoperative days 7, 14, 21, and 28 and total opioid consumption were detected. It follows that oral supplement of ATP could benefit patients recovering from TKA.     

Reinforcement in removable prosthodontics: a literature review

Removable prosthodontics are often associated with mechanical troubles in daily use, such as fracture or deformation. These troubles render prostheses unusable and reduce wearers’ QOL. Various reinforcements are used to prevent such problems, but consensus on reinforcement has not been reached. This review aimed to summarise the effects of reinforcement and to propose favourable reinforcement based on material, design and position in the prostheses. Initially, 139 articles were selected by electronic and manual searches. After exclusion of 99 articles based on the exclusion criteria, 40 articles were finally included in the review. Electronic searches were performed for articles published from 2005 to 2015 in PubMed, EMBASE, MEDLINE and Cochrane Library, and manual searches were performed in 10 journals relevant to the topic of removable prosthodontics. For in vitro studies, certain dental alloys and fibres were mainly used. Their forms were different, including complicated forms in dental alloys and various forms in fibres. The materials were examined for mechanical properties like fracture strength, flexural strength and elastic modulus and compared with one another or without reinforcement. There were a few clinical studies and one longitudinal study. Cast metal reinforcement seemed to be most favourable in terms of fracture toughness and stiffness. The most favourable forms differed depending on the prostheses, but placement around thin and deformable areas was effective. However, randomised or longitudinal clinical reports and comparative clinical studies on the use of reinforcement were still lacking and such studies are necessary in the future.     

Comparison of the Torsional Resistance of 4 Different Glide Path Instruments

IntroductionThe present study aimed to compare the torsional strength of the initial files of the Mtwo (VDW, Munich, Germany) and novel Rotate systems (VDW, Munich, Germany) with the ProGlider (Dentsply Sirona, Ballaigues, Switzerland) and R-Pilot (VDW) glide path instruments.MethodsThe Mtwo (10/.04), ProGlider (16/.02), R-Pilot (12.5/.04), and Rotate (15/.04) glide path files were compared regarding their torsional strength, which was tested using a specially designed test device (N = 20). The data obtained were statistically analyzed at 5% significance level using 1-way analysis of variance and the post hoc Tukey test. The fragment surfaces and separated instruments were examined with ×50, ×100, and ×1000 magnification under a scanning electron microscope.ResultsThe R-Pilot group showed the highest torsional strength value among all groups (P < .05), whereas there was no significant difference between the torsional strength values of the Mtwo and ProGlider groups (P > .05). The Rotate group had the lowest torsional strength among all groups (P < .05). The Mtwo group showed the lowest angle of rotation among all groups (P < .05).ConclusionsAlthough the R-Pilot glide path file exhibited the highest torsional strength in all groups, Rotate showed the highest angle of rotation. Differences in torsional resistance of the instruments may be associated with their manufacturing methods and design features.