Ocular counterrolling induced by centrifugation during orbital space flight

During the 1998 Neurolab mission (STS-90), four astronauts were exposed to interaural centripetal accelerations (Gy centrifugation) of 0.5g and 1g during rotation on a centrifuge, both on Earth and during orbital space flight. Subjects were oriented either left-ear out or right-ear out, facing or back to motion. Binocular eye movements were measured in three dimensions using a video technique. On Earth, tangential centrifugation that produces 1g of interaural linear acceleration combines with gravity to tilt the gravitoinertial acceleration (GIA) vector 45° in the roll plane relative to the head vertical, generating a summed vector of 1.4g. Before flight, this elicited mean ocular counterrolling (OCR) of 5.7°. Due to the relative absence of gravity during flight, there was no linear acceleration along the dorsoventral axis of the head. As a result, during in-flight centrifugation, gravitoinertial acceleration was strictly aligned with the centripetal acceleration along the interaural axis. There was a small but significant decrease (mean 10%) in the magnitude of OCR in space (5.1°). The magnitude of OCR during postflight 1g centrifugation was not significantly different from preflight OCR (5.9°). Findings were similar for 0.5g centrifugation, but the OCR magnitude was approximately 60% of that induced by centrifugation at 1g. OCR during pre- and postflight static tilt was not significantly different and was always less than OCR elicited by centrifugation on Earth for an equivalent interaural linear acceleration. In contrast, there was no difference between the OCR generated by in-flight centrifugation and by static tilt on Earth at equivalent interaural linear accelerations. These data support the following conclusions: (1) OCR is generated predominantly in response to interaural linear acceleration; (2) the increased OCR during centrifugation on Earth is a response to the head dorsoventral 1g linear acceleration component, which was absent in microgravity. The dorsoventral linear acceleration could have activated either the otoliths or body-tilt receptors that responded to the larger GIA magnitude (1.4g), to generate the increased OCR during centrifugation on Earth. A striking finding was that magnitude of OCR was maintained throughout and after flight. This is in contrast to most previous postflight OCR studies, which have generally registered decreases in OCR. We postulate that intermittent exposure to artificial gravity, in the form of the centripetal acceleration experienced during centrifugation, acted as a countermeasure to deconditioning of this otolith-ocular orienting reflex during the 16-day mission. Electronic Publication     

Study of the carrying angle of the human elbow joint in full extension: a morphometric analysis

This study measured the carrying angle of the elbow joint in full extension in 600 students, using the supplementary angle to that between the longitudinal axis of the arm and that of the forearm. The mean carrying angle was 12.88°±5.92: 10.97°±4.27 in men and 15.07°±4.95 in women. The carrying angle changes with skeletal growth and maturity. The angle is always greater on the side of the dominant hand. We confirmed the inverse relationship between the carrying angle and the intertrochanteric diameter. Also, the type of constitution influences the value of the carrying angle, especially in women.     

Detection and deletion of motion artifacts in electrogastrogram using feature analysis and neural networks

Electrogastrogram is a surface measurement of gastric myoelectrical activity, and electrogastrography has been an attractive method for physiological and pathophysiological studies of the stomach due to its nonivasive nature. Motion artifacts, however, ruin the electrogastrogram (EGG), and make the analysis very difficult and sometimes even impossible. They must be eliminated from EGG signals before analysis. Up to now, this can only be done by visual inspection, which is not only time-consuming but also subjective. In this study, a method using feature analysis and neural networks has been developed to realize automatic detection and elimination of the motion artifacts in EGG recordings by computer. Experiments were conducted to investigate the characteristics of different motion artifacts. Useful features were extracted, and different combinations of the features used as the input of the neural network were compared to obtain the optimal performance for the detection of motion artifacts using the artificial neural network.     

硅凝胶人工晶体的生物相容性

本文参照国内外有关医用高分子材料的生物学评价试验方法,对国产医用级硅凝胶人工晶体作了系统的生物学评价。结果表明:硅凝胶人工晶体对眼及皮肤无刺激作用、无热原、无毒性、体外溶血率小于5％,对细胞生长有促进作用,长期植入皮下时,随植入时间延长,囊壁厚度逐渐变薄,炎性细胞反应30天基本消失。染色体及骨髓多染红细胞未受影响。因此,可以认为硅凝胶人工晶体有良好的生物相容性。     

Construction and characterization of centric circular and acentric linear chromosomes in fission yeast

Summary Gene disruption and gap repair of chromosomal DNA have been frequently employed techniques in yeast genetics. To extend the possibility of using these gene manipulations for larger genomic regions, we have examined the maximal sizes of chromosomal DNA disrupted or repaired in vivo. Here we report a simple, potentially general, method for selectively deleting a 150 kb region, or gap-filling a 100 kb region, in the fission yeast genome. This enables the generation of acentric linear chromosomes by deletion, or the cloning of large functional centromeric DNAs into circular minichromosomes by gap-filling. The fidelity of the resulting gap-filling is high, judging from partial-digestion mapping of gap-repaired DNAs. By analysing a series of such circular minichromosomes, we conclude that only a part of the repetitive centromeric region, including the central domain, is essential for mitotic and meiotic chromosome segregation. Acentric linear chromosomes, although unstable, could be maintained, indicating that it may be possible to construct an acentric vector for large DNA fragments in this organism.     

Die Beanspruchung des menschlichen Ellenbogengelenks

Zusammenfassung Bei 80 Objekten werden die Gelenkflächen des menschlichen Ellenbogengelenks untersucht. Die Trochlea und das Capitulum humeri sowie das Caput radii zeigen keine nennenswerten Unterschiede in der Ausdehnung der mit typischem Gelenkknorpel bedeckten Flächen. Dagegen lassen sich für die Ulnazange drei charakteristische Formgruppen abgrenzen: In 3 Fällen kann eine einheitliche Knorpelfläche beobachtet werden. Bei etwa zwei Drittel der untersuchten Objekte liegt im mittleren Bereich der Incisura trochlearis in horizontaler Richtung ein 2–5 mm breiter knorpelfreier Streifen, der den Gelenkknorpel in 2 vollständig getrennte Flächen unterteilt. Das restliche Drittel der Objekte besitzt eine unvollständige Trennung der Gelenkfläche. Unter Berücksichtigung der Vorstellungen von Pauwels über die causale Histogenese der mesenchymalen Stützgewebe sowie der Materialverteilung im Knochengewebe in Abhängigkeit von der einwirkenden Spannungsgröße werden die morphologischen Befunde den für die jeweiligen Skeletelemente von Pauwels ermittelten Spannungsdiagrammen gegenübergestellt. An der Trochlea und dem Capitulum humeri und am Caput radii findet sich eine geradezu ideale Übereinstimmung in der Ausdehnung der Knorpelfläche und der Knochendichte unter den Gelenkflächen mit den entsprechenden Spannungsdiagrammen. An der Ulna trifft dies nur für einen geringen Teil der Objekte zu. Für die unterschiedliche Ausgestaltung der Incisura trochlearis werden zwei mögliche Ursachen diskutiert: 1. die Resultierende R verharre während des Bewegungsablaufes in einzelnen Positionen innerhalb der Incisura trochlearis verschieden lange; 2. der Krümmungsradius der Trochlea humeri sei größer als derjenige im mittleren Bereich der Ulnazange, so daß hier wegen des fehlenden Kontaktes der Gelenkflächen keine Druckübertragung möglich ist.

---

The stress of the human elbow jointI. Functional morphology of the articular surfaces

Summary The articular surfaces of 80 human elbow joints are analysed. The trochlea and capitulum humeri and the caput radii of the investigated individuals show no particular differences in the extent of their surfaces covered with typical articular cartilage. On the other hand the form of the incisura trochlearis is rather variable. Three characteristic formgroups are to be discerned. In three objects a continuous cartilage surface has been observed. In 50 of the investigated joints there is a small intersection free from cartilage in the midst of the incisura trochlearis, dividing the articular cartilage in two isolated surfaces. In the rest of the analysed objects the articular surface is divided only partially. According to Pauwels' hypothesis on the causal histogenesis of the mesenchymal supporting tissues and of the density distribution of the bone dependence upon the magnitude of the local unit stress the morphological findings in the single investigated parts of the elbow joint are confronted with the corresponding stress diagram as described by Pauwels. In the trochlea and capitulum humeri and in the caput radii a nearly ideal correspondence of the extent of the articular surface and the density of the bone tissue with the unit stress diagrams are found. In the ulna this correspondence exists only in few of the analysed objects. For the different form of the incisura trochlearis two possible explanations are discussed: 1, during the motion the resultant of forces may stay for a different time in their single positions in the incisura trochlearis; 2. the curvature radius of the trochlea humeri may be greater than that one of the incisura trochlearis in the central area. So no pressure occurs in this part of the articular surface.

Mit freundlicher Unterstützung durch die Deutsche Forschungsgemeinschaft.     

Morphomechanics of the humero-ulnar joint: II. Concave incongruity determines the distribution of load and subchondral mineralization

Background: A deeper joint socket (concave incongruity) is found at most angles of flexion of the humero-ulnar joint and maintained over a wide range of physiological loading. It is, however, unclear how far this incongruity affects the distribution of load and subchondral mineralization of this joint as compared with a congruous configuration. Methods: Two nonlinear, axisymmetrical finite element models with two cartilage layers were constructed, one congruous and one incongruous, with a joint space of realistic magnitude. The distribution of subchondral mineralization was determined by computed tomography osteoabsorptiometry in the same six specimens that were investigated in the first part of the study, and compared with the biomechanical data obtained there and the predictions of the models. Results: In the congruous case, the center of the socket is highly loaded, whereas the periphery does not experience mechanical stimulation. A central bone density maximum is predicted. With concave incongruity the position of the contact areas shifts from the joint margin towards the center as the load increases, and the peak stresses are considerably lower. A bicentric ventro-dorsal distribution pattern of subchondral mineralization is predicted, and this is actually found in the six specimens. Conclusions: Concave incongruity is shown to determine load transmission and subchondral mineralization of the humero-ulnar joint. It is suggested that this shape leads to a more even distribution of stress, provides intermittent stimulation of the cartilaginous tissue, and has beneficial effects on the metabolism, nutrition, and lubrication of the articular cartilage during cyclic loading. © 1995 Wiley-Liss, Inc.     

Examination of the Diagnostic Value and Estimation of the Chaos Phenomenon in Temporomandibular Joint Sounds Using Fractal Dimension

.The aim of this study is to estimate the chaos phenomenon in temporomandibular joints (TMJ) sound using fractal dimension (FD), and to examine the diagnostic value of the FD in comparing TMJ sounds produced by 6 asymptomatic and 25 symptomatic TMJ. Multiple mandibular opening and closing cycles recorded were used to calculate the waveform dimension and correlation dimension in the FD. Chaos in the TMJ sounds was estimated by the FD that was saturated with some constant value to an increase of embedding dimension. Results reveal that fractal analysis produces a high degree of reproducibility within, and similarity across subjects, and indicate that both FD values of the asymptomatic TMJ sounds are significantly higher than those of the symptomatic. These findings suggest that chaos is present in TMJ sounds and the difference in the FD is of diagnostic value in evaluation of pathological change in TMJ sound signals.     

模拟股骨置入人工关节扭转与应力松弛蠕变的实验研究

研究了在相同扭矩作用下,正常组股骨和以生物学和骨水泥固定置入人工关节组股骨标本扭转角度,还对正常股骨、生物学固定股骨和骨水泥固定股骨进行应力松弛、蠕变实验,为临床提供生物力学参数。以电子万能试验机对正常对照组、股骨置入人工关节骨水泥固定组、股骨置入人工关节生物学固定组标本进行扭转和粘弹性实验研究。得出了各组标本在相同扭矩下的扭转角度及悬臂弯曲状态下,正常组和置入人工关节组标本应力松弛、蠕变数据和曲线。对实验数据进行归一化处理,得出了正常组和置入人工关节组标本的归一化应力松弛函数,归一化蠕变函数及曲线。表明:骨水泥固定组扭转角比生物学固定组小,说明骨水泥固定有较好的稳定性,其应力松弛、蠕变量丢失小。骨水泥固定组较生物学固定组3600s应力松弛、蠕变量大。     

膝关节韧带的生物力学研究进展

膝关节韧带的生物力学是近年来研究的热点之一,力学刺激对调控韧带功能、韧带组织愈合和重建有着重要的作用,作者从膝关节韧带的结构、力学与生化特点、愈合与重建、施加应力与制动对韧带的影响、应力对韧带细胞分化的影响和前交叉韧带与内侧副韧带的对比研究等方面综述了近年来的一些研究进展。