28 mm Metasul™ bearings in primary total hip arthroplasty

Assessment of possible low-wear with some former metal-on-metal (MoM) total hip arthroplasties (THA) led to the reintroduction of metallic bearings in the late 80’s. The author reports on two studies of Metasul-28 mm cementless THA. In the first one in a general population, impingement has been the main cause of osteolysis and Co level survey has been a good indicator of Metasul bearing behaviour. In the second study, in a group of 83 less than 50-year-old and active patients, Metasul bearings showed good wear resistance at 7.2 years mean follow-up. In both studies, no general toxic effect could have been detected thus far. According to the current knowledge, it is always reasonable to expect low-wear and better THA longevity with use of MoM bearings under the following conditions: 1) use of a CoCr alloy with high carbide concentration; 2) reduce impingement risk (head without sleeve, slimmer as possible neck, perfectly adapted Morse cone from the same manufacturer, well — oriented components); and 3) prefer cementless acetabular fixation.     

人工髋关节置换术后脂肪栓塞综合征的观察与护理

笔者报道人工髋关节置换术后脂肪栓塞综合征的护理措施认为重视氧饱和度及动脉血氧分压监测，注意观察中枢神经系统症状和呼吸系统症状，及时发现并纠止低氧血症，对不同的病人制定不同护理方案，严密观察病情，及时掌握病情变化：是护理的关键。     

Trapeziometacarpal joint osteoarthritis: a retrospective study comparing arthrodesis to tendon interposition arthroplasty

Abstract Surgical management of trapeziometacarpal joint osteoarthritis (OA) is still controversial. The aim of this study was to evaluate and compare results of trapeziometacarpal arthrodesis and of tendon interposition arthroplasty. One hundred twenty-six patients suffering from trapeziometacarpal OA underwent surgery between 1996 and 2001. Of these patients, 62 (78 thumbs) treated with joint arthrodesis and 33 (41 thumbs) treated with tendon interposition arthroplasty with abductor pollicis longus (APL) have been evaluated at follow-up and therefore entered this study. Mean age was 53 years, while the mean follow-up was 36 months. Overall results were satisfactory in 84 patients with good pain improvement. Patients treated with arthrodesis showed better functional ability in bi-digital pinch and grip strength. First finger opposition motion, however, was better conserved in patients treated with interposition arthroplasty. Fusions had an 11.5% complication rate (9 thumbs) with nonunions, whereas 14.8% (6 thumbs) of patients treated with interposition arthroplasty developed 1 first metacarpal base collapse, resulting in 1 first ray length reduction. Despite complications, however, patients did not report unsatisfactory results and generally experienced marked pain reduction. This study shows that arthrodesis can be considered the treatment of choice in patients suffering from trapeziometacarpal OA at Eaton stage III or less, whatever the age and when a good pinch strength is needed.     

Arthroscopic Coracoclavicular Ligament Reconstruction Using Biologic and Suture Fixation

Presented in this report is a modified arthroscopic approach to acromioclavicular joint reconstruction via suture and allograft fixation. An arthroscopic approach is used to expose the base of the coracoid by use of electrocautery. After an open distal clavicle excision is performed, clavicular and coracoid tunnels are created under arthroscopic visualization as previously described by Wolf and Pennington. The myotendinous end of a semitendinosus allograft is sutured to a Spider plate (Kinetikos Medical, San Diego, CA). The tendinous end of the graft is prepared with a running baseball stitch. A Nitinol wire with a loop end (Arthrex, Naples, FL) is used to pass 2 free FiberTape sutures (Arthrex) and the leading sutures from the tendinous end of the graft through the clavicular and coracoid tunnels, exiting out the anterior portal. One of the FiberTape sutures is retrieved with a grasper and passed over the anterior aspect of the distal clavicle. The second FiberTape suture and the allograft are passed over the distal end of the resected clavicle. While the acromioclavicular joint is held reduced, the FiberTape sutures are tied to the plate and the allograft is tensioned medially until the plate is embedded against the superior surface of the clavicle. The tendinous end of the graft is secured to the superior surface of the clavicle with a Bio-tenodesis screw (Arthrex) medial to the clavicular tunnel.     

The role of primary total hip replacement for the treatment of the displaced femoral neck fractures

Summary The management of displaced intracapsular fractures of the hip is still controversial because of the high incidence of complications after internal fixation or hemiarthroplasty. To avoid some of these complications we have used primary total hip replacement for independently mobile patients over 65 years of age.Of 49 patients who were interviewed an average of 4.6 years after total hip replacement, 81.6% had excellent or good results as assessed by the Harris Hip Score. At that time two hips had been revised and another converted to Girdlestone due to deep infection. The survival of the prostheses was at 5 years 91.3%.It is concluded that total hip replacement is an established method of management for a selected group of patients with this injury, but further prospective studies are needed in order to define the groups of patients that benefit the most.     

Long-term results of open reduction for residual subluxation in congenital dislocation of the hip: A new open reduction method involving 360° circumferential capsulotomy

We report satisfactory results with a new operative treatment, conducted via an extensive anterolateral approach, involving 360 degree circumferential capsulotomy, for residual subluxation in congenital dislocation of the hip (CDH). Long-term radiographic results of this procedure (group A) were compared retrospectively with the results of partial capsulotomy (group B), which preserved the posteroinferior joint capsule. The mean center edge angle in group A (22.5°) was greater than that in group B (16.0°). Satisfactory results were achieved in 11 of 15 hips (73%) (Severin class I or II) in group A, and in 5 of 12 hips (42%) in group B. These results suggest that whole circumferential capsulotomy can remove obstacles to complete reduction, and that acetabular development can be expected in hips reduced by the procedure, without the performance of innominate osteotomy. We believe that our technique is a useful alternative for the treatment of residual subluxation in CDH.     

A Biomechanical Double Sac (Pericardium-Pebax) for Specially Shaped Artificial Ventricles: A Computerized Study to Evaluate Its Mechanical and Volumetric Properties

Abstract: For original ovoid shaped artificial ventricles. a biomechanical double sac consisting of a biological sac (porcine pericardium) as the blood contact interface and a synthetic sac (Pebax 3533) as the mechanical support to assume systolic-diastolic dynamic constraints was conceived. The volumetric and mechanical properties were assessed with a three-dimensional modeling of Pebax sacs and computerized simulations of their systolic distortions for both right and left ventricular configurations. The stresses and strains of these sacs were represented as quantitative mappings for a maximum end-systolic state and were below the respective threshold values above which the Pebax material is jeopardized for permanent structure impairment. After fatigue tests applied on Pebax strips under the alleged working conditions of Pebax sacs, the material structure was unchanged and maintained its intrinsic mechanical properties. The theoretical maximum stroke volumes were 74.4 cm³ and 62.4 cm for the left and right ventricular configurations, respectively. With these mechanical and volumetric features, the biomechanical double sac concept was considered valid and could be provided for a consequent specific total artificial heart.     

Invasive ventilation in the emergency department: Part 2: Implications for patient safety

The use of mechanical ventilation in the Emergency Department requires adequate resources in order to maintain patient safety and avoid potential risks. Moreover, developments in technology require increased knowledge of mechanical ventilation techniques to address the complexity of decision-making involved. Organisational issues and system factors have the potential to negatively impact on the ability of the emergency service to provide optimum care to patients receiving mechanical ventilation. These issues include staffing and skill-mix, demand on emergency services, role-delineation, scope of practice, and current mechanisms for monitoring of quality and safety. Furthermore, in response to advances in ventilator technology, current education programs for both nursing and medical staff require review to ensure that they provide comprehensive information about the types of ventilation techniques now available and the relative risks and benefits associated with their application.This article is the second in a two-part series and explores the educational and organisational factors that impact upon safety and quality of care delivered to patients receiving mechanical ventilation in the emergency department. Recommendations for future policy development, curriculum review and reporting mechanisms to support further research in the application of mechanical ventilation in the emergency department are made.     

Cora Rotary Pump for Implantable Left Ventricular Assist Device: Biomaterial Aspects

Abstract: Our group is developing a left ventricular assist device based on the principle of the Maillard-Wankel rotative compressor: it is a rotary, not centrifugal, pump that produces a pulsatile flow. Stringent requirements have been defined for construction materials. They must be light, yet sufficiently hard and rigid, and able to be machined with high precision. The friction coefficient must be low and the wear resistance high. The materials must be chemically inert and not deformable. Also, the materials must be biocompatible, and the blood contacting surface must be hemocompatible. We assessed the materials in terms of physiochemistry, mechanics, and tribology to select the best for hemocompatibility (determined by studies of protein adsorption: platelet, leukocyte, and red cell retention: and hemolysis, among other measurements) and biocompatibility (determined by measurement of complement activation and toxicity, among other criteria). Of the materials tested, for short- and middle-term assistance, we chose titanium alloy (Ti₆AI₄V) and alumina ceramic (Al₂O₃) and for long-term and permanent use, composite materials (TiN coating on graphite). We saw that the polishing process of the substrate must be improved. For the future, the best coating material would be diamond-like carbon (DLC) or crystalline diamond coating.