中日友好医院分型股骨头坏死腓骨植入治疗的三维有限元分析

文题释义：股骨头坏死中日友好医院分型的有限元分析：根据李子荣等提出的中日友好医院分型，建立股骨头坏死三维模型，分为 M型(内侧型)、C型(中央型)和 L型(外侧型)，其中 L型包括L1型(次外侧型)、L2型(极外侧型)和 L3型(全头型)。通过对建立的模型进行有限元分析，为该分型的保髋治疗提供了一定力学依据，显示外侧柱的存留是精准预防塌陷的重要因素，为进一步实现个体化治疗提供力学基础。 腓骨支撑坏死股骨头保髋手术：是对于早中期股骨头坏死需要保留股骨头患者进行的一种手术方式。首先需对股骨头进行髓芯减压，清除一定坏死骨，空腔填塞松质骨(髂骨为主)，打压结实后植入腓骨(异体或自体)支撑，给坏死区的提供力学支撑及生物学修复，预防股骨头进一步坏死及塌陷。 背景：研究报道股骨头坏死的保髋疗效与外侧柱存留密切相关，中日友好医院分型是根据三柱结构确立的，对股骨头塌陷的预测准确性高。 目的：建立股骨头坏死中日友好医院分型各分型仿真的三维有限元模型，通过有限元分析各分型腓骨植入的力学变化，探讨外侧柱存留对保髋疗效的意义，为该分型的塌陷精准预测提供基础。 方法：建立正常股骨头、中日友好医院分型(M型、C型、L1型、L2型、L3型)股骨头坏死及其腓骨植入3组11种三维有限元模型，运用ANSYS软件进行有限元分析计算，观察各组模型的最大应力值、最大位移值及股骨头内部载荷传递模式。 结果与结论：①坏死组位移最大，应变最大，且因坏死分型不同而位移不同，位移变化如下：M型相似文献   

Biodegradable versus titanium osteosynthesis in maxillofacial traumatology: a systematic review with meta-analysis and trial sequential analysis

Titanium osteosynthesis is currently the fixation system of choice in maxillofacial traumatology. Biodegradable osteosynthesis systems have the ability to degrade in the human body. The aim of this study was to conduct a systematic review, with meta- and trial sequential analyses, to assess the efficacy and morbidity of biodegradable versus titanium osteosynthesis after maxillofacial trauma. MEDLINE, Embase, and CENTRAL were searched for randomized controlled trials and prospective and retrospective controlled studies. Five time periods were studied: perioperative, short-term (0–4 weeks), intermediate (6–12 weeks), long-term (>12 weeks), and overall follow-up. After screening 3542 records, 24 were included. All had a high risk of performance and detection bias due to the nature of the interventions. Meta-analysis showed no differences in efficacy or morbidity between biodegradable and titanium osteosynthesis. The risk of perioperative screw breakage was significantly higher (risk ratio 17.13, 95% confidence interval 2.19–34.18) and the symptomatic plate removal rate lower in the biodegradable group (risk ratio 0.11, 95% confidence interval 0.02–0.57), which was confirmed by the trial sequential analysis. The quality of evidence ranged from very low to moderate. Based on the narrative review and meta-analyses, current evidence shows that biodegradable osteosynthesis is a viable alternative to titanium osteosynthesis when applied in the treatment of maxillofacial trauma, with similar efficacy but significantly lower symptomatic plate removal rates. Perioperative screw breakage occurred significantly more often in the biodegradable group compared to the titanium group.     

Customized three-dimensionally printed mandibular external fixator

The advent of customized three-dimensional (3D) printing allows the affordable manufacturing of sophisticated medical devices, thereby providing swift and simple solutions to specific needs in modern healthcare. Meanwhile, certain devices such as industrial mandibular external fixators (EFs) have become less and less available from medical device companies because of decreased indications. What is more, their handling is often complex. The authors report, step by step, the original design and uneventful clinical use of a 3D-printed, customized mandibular EF. This device was designed together with a positioning and drilling guide for the fixation of a septic mandibular pseudarthrosis. It provided an adequate and satisfactory balance between lightness and rigidity. A simple, accurate and safe placement of the EF was achieved thanks to the skin-supported positioner and drilling guide, thereby making the procedure minimally invasive and time-efficient. To our knowledge, this is the first reported clinical use of a 3D-printed, customized mandibular EF to date. Because such 3D technology is becoming increasingly available to a large number of surgeons, the authors believe that the present innovation could become an alternative to reusable standard EFs.     

Standard versus customised locking plates for fixation of schatzker ii tibial plateau fractures

Aim3D-printed implants could improve the capture of fracture fragments for improved stability of tibial plateau fracture fixation. The aim of this study was to compare the biomechanical strength of fixation constructs using standard and customised 3D-printed proximal tibial locking plates for fixation of tibial plateau fractures.MethodsThis is a biomechanical study utilising six pairs of cadaveric tibiae. Fractures were created in an identical fashion using an osteotome and mallet, and fixed using either a standard, commercially-available proximal tibia locking plate or a customised 3D-printed plate. Design and production of the customised plates followed a “3D printing at point-of-care” model. Customised stainless steel 316 L plates were produced within a local additive manufacturing laboratory based upon pre-operative CT scans. Determination of implant choice within each cadaver pair was performed via simple randomisation. Following fracture fixation, the tibiae were skeletalised and biomechanically tested using a customised loading jig and a size-matched femoral knee prosthesis. The constructs were loaded cyclically from 100 N to approximately three times the cadaveric body-weight at 5 Hz for 10 000 cycles. Every 1000 cycles, the test was paused and the tibia was physically checked for failure. If failure had not occurred by the end of the testing cycle, the construct was loaded to failure and the load at which the construct failed was noted.ResultsFixation constructs using the 3D-printed plates performed comparably to those using the standard plates. There was no significant difference in the degree of fracture fragment displacement in both constructs. Overall longitudinal construct stiffness and load to failure was higher in the 3D-plates group but this did not reach statistical significance.ConclusionProduction of customised plates for proximal tibia fractures at point-of-care is feasible, however fixation constructs with these plates did not provide any biomechanical advantage over standard plates in terms of axial loading stiffness.     

42例大面积烧伤病人血清维生素D水平分析

目的研究大面积烧伤病人体内血清维生素D水平情况。方法应用化学发光受体检测技术,对42例成年大面积烧伤病人血清维生素D进行检测。结果该组病人血清维生素D含量偏低,远远未达到健康人群水平(P<0.01)。结论大面积烧伤病人在长期住院后存在一定程度的维生素D不足,可能对病人的康复有负面影响,有必要在治疗过程中进行适当的补充。     

(-)-Epigallocatechin-3-gallate,reduces corneal damage secondary from experimental grade II alkali burns in mice

Background

Since recent reports have shown that (-)-Epigallocatechin-3-gallate (EGCG) could be used for treating proliferative and inflammatory disorders, we explored its use for the management of corneal chemical burns.

维生素D与多囊卵巢患者胰岛素抵抗相关性及其机制研究

目的:探讨维生素D对多囊卵巢综合征(PCOS)患者胰岛素抵抗(IR)的影响及其机制研究.方法:选取自2013年2月～2014年2月在该院就诊的48例PCOS患者作为PCOS组,另选30例健康育龄期妇女作为对照组,测量研究者身高、体质量参数,计算体质指数(BMI),采用全自动生化分析仪葡萄糖氧化酶检测空腹血糖浓度(FBG)、化学发光法检测血清空腹胰岛素(FI)及胰岛素样生长因子-1(IGF-1)水平、ELISA方法测定血清25-(OH)D3浓度,计算稳态胰岛素评价指数(HOMA-IR)用于评价胰岛素抵抗性,量化胰岛素敏感指数(QUICKI)用于评价胰岛素敏感度,并分析FI、HOMA-IR、QUICKI及IGF-1与血清25-(OH)D3浓度的相关性.结果:PCOS组BMI及FBG与对照组相比,差异无统计学差异(P＞0.05),而FI、HOMA-IR、QUICKI、25-(OH) D3及IGF-1与对照组比较,差异均有统计学差异(P＜0.05);并且PCOS组FI和HOMA-IR与血清25-(OH)D3浓度呈显著负相关,差异有统计学意义(P＜0.05),QUICKI和IGF-1水平与血清25-(OH)D3浓度呈显著正相关,差异有统计学意义(P＜0.05).结论:PCOS患者IR可能与血清中维生素D缺乏有关,而IGF-1分泌减少又可能是导致PCOS患者维生素D缺乏的重要原因.     

Anisotropic Bladder Planning Target Volume in Bladder Radiation Therapy

Purpose

This study aimed to investigate 3 planning target volume (PTV) margin expansions and determine the most appropriate volume to be used in bladder preservation therapy when using daily cone beam computed tomography (CBCT). We aimed to establish whether a smaller PTV expansion is feasible without risking geographical miss.

3-磷酸甘油酸脱氢酶促进丝氨酸合成在肿瘤进展中的机制

丝氨酸生物合成途径活性的上调是许多癌症明显的共同特征。该途径的第一种限速酶3-磷酸甘油酸脱氢酶(PHGDH)在黑色素瘤、乳腺癌和肾癌等癌组织中高表达，对肿瘤细胞增殖、转移、侵袭有着重要作用。糖酵解中间产物3-磷酸甘油酸在PHGDH作用下，氧化为磷酸羟基丙酮酸并最终合成丝氨酸。丝氨酸转化为甘氨酸，然后在核苷酸、s-腺苷甲硫氨酸(SAM)和还原型谷胱甘肽(GSH)的合成中起着重要的作用。PHGDH 有望成为肿瘤治疗的新靶点。