Ex vivo estimation of thoracolumbar vertebral body compressive strength: The relative contributions of bone densitometry and vertebral morphometry

The estimation of vertebral fracture risk in individuals with suspected osteopenia is commonly based on measurements of lumbar spine bone density. The efficacy of vertebral size and deformity, as assessed by vertebral morphometry, in the prediction of fractures has been less studied. In an ex vivo investigation the regional relationships between vertebral size, vertebral deformity, bone density and compressive strength throughout the thoracolumbar spine were examined. In 16 vertebral columns (T1–L5) the bone mineral content (BMC) and bone mineral density (BMD) of each segment were measured using lateral projection dual-energy X-ray absorptiometry, and the vertebral cancellous density (VCD) and mid-vertebral cross-sectional area (CSA) measured using quantitative computed tomography. Vertebral body heights were determined from mid-sagittal CT scans, and vertical height ratios calculated for each segment. The failure load and failure stress of the isolated vertebral bodies were determined using a material testing device. Separate analyses were performed for the upper (T1–4), middle (T5–8) and lower (T9–12) thoracic, and lumbar (L1–5) segments. In all regions, failure load was strongly correlated with BMD (r=0.82–0.86), moderately correlated with VCD (r=0.60–0.71) and vertebral height (r=0.22–0.49), and poorly correlated with the height ratios (r=0.04–0.33). Failure stress was best predicted by BMD (r=0.73–0.78) and VCD (r=0.70–0.78) but was poorly correlated with all morphometric variables (r=0.01–0.33). The segmental correlations between BMD and VCD ranged fromr=0.49 tor=0.79. For all regions, BMD and VCD were included in the stepwise regression models for predicting failure load and failure stress. Either the mid-vertebral height or CSA were included in all the failure load models, while mid-vertebral height was included in only one of the failure stress models. The results suggest that vertebral deformity and size (as assessed by vertebral morphometry) make only a minor contribution to the prediction of vertebral strength additional to that provided by bone densitometry alone. The consistent regional relationships between variables appear to support the practice of global fracture risk assessment based on lumbar spine densitometry.     

用酸蚀法提高纯钛与光固化冠桥树脂粘结强度的研究

目的：研究用酸蚀法提高钛与光固化复合树脂剪切粘结强度的可行性，并观察表面粗糙度与剪切粘结强度之间的关系。方法：采用不同浓度的酸蚀剂对钛铸件表面进行酸蚀，并与artglass光固化复合树脂进行粘结，以单纯喷砂组为对照，比较剪切粘结强度的差异。对酸蚀后及剪切试验后的金属表面进行扫描电镜观察，并测定其表面粗糙度。结果：用酸蚀法可以显著提高钛与复合树脂的粘结强度，HF浓度为4％时粘结强度最高。表面粗糙度随酸蚀剂的浓度增高而下降。结论：纯钛铸件用酸蚀法处理后可以获得较高的粘结强度，HF酸浓度以4％为宜。表面粗糙度对粘结强度不起决定性作用。     

Differential titin isoform expression in human skeletal muscle

Mammalian skeletal muscle expresses at least two isoforms of the cytoskeletal protein titin (connectin; MW ≈ 3000 kDa). These isoforms are associated with different passive force curves, and thus may affect physical performance. To study the distribution of titin and its possible influence on performance in humans, muscle biopsies were obtained from 15 males (X ± SE; age = 25.4 ± 2.9 years, height = 177.7 ± 1.8 cm, weight = 76.5 ± 2.2 kg). Two biopsies were obtained on separate occasions from both the right and left vastus lateralis, and one biopsy each from the lateral head of the right gastrocnemius and the right soleus, with all biopsies handled identically. Fibre type analyses were performed via mATPase histochemistry. Expression of titin and myosin heavy chain isoforms were determined by SDS-PAGE. Titin bands in the resulting gels were highly repeatable and were verified by migration patterns, as well as Western blot analysis. Two groups of subjects were identified: group 1 (n=10) expressed only one titin isoform (titin-1) in all biopsies, and group 2 (n=5) expressed two titin isoforms (titin-1 and titin-2) in all biopsies. No significant differences (P> 0.05) between groups were observed for percentage fibre types, percentage fibre type areas, fibre type cross-sectional areas, and percentage myosin heavy chain expression when comparing individual muscles, sampling times or bilateral comparisons. This is the first report of differential titin isoform expression in healthy, mature human skeletal muscle, but it is not clear why this occurs or what influence this may have on performance.     

The application of percolation theory to the compaction of pharmaceutical powders

Based on the concepts of percolation theory the compaction process is interpreted as a site-bond percolation phenomenon. The combination of the Heckel equation with an equation derived earlier yields a simple relationship between the tensile strength σ_t, or the deformation hardness P and the relative density. This mathematical model is identical with the fundamental law of percolation theory i.e., X = s(p − p_c)^q with X= system property equivalent to tensile strength or deformation hardness, S = scaling factor, p = site occupation or bond formation probability corresponding to the relative density p,p_c = percolation threshold and critical exponent q = 1 according to percolation on a Bethe lattice. In the case of the tensile strength σ_t and the deformation hardness p, two percolation thresholds p_c(1) and p_c(2) corresponding to p_c(1) and p_c(2) could be identified. The relative density p_c(1) which is close to the relative poured or relative tapped density can be interpreted as a bond percolation threshold. The particles are bonded by weak interparticulate forces and form only loose compacts as used for filling of capsules. The relative density p_c(2) is the relative density where the first stable pharmaceutical compact is achieved which can no longer be disintegrated mechanically into its primary particles. It is of special interest that the above equation is also valid for the elastic modulus with the only percolation threshold p_c(1) = p_c(1).     

等离子接枝处理的CF/PAA复合材料层间剪切强度及其形貌研究

采用等离子技术对碳纤维(CF)进行接枝芳基乙炔(PAA)处理，研究了影响CF／PAA复合材料层间剪切强度(ILSS)的因素。结果表明，经等离子接枝PAA处理后，复合材料的ILSS有了很大提高。SEM显示经接枝处理后CF和PAA树脂之间的界面结合紧密，改善了复合材料的界面结合性能。     

Muscular performance after a 3 month progressive physical exercise program and 9 month follow-up in subjects with low back pain. A controlled study

The purpose of this study was to assess, in subjects with low back pain, the changes and their permanence in muscular performance after a 3 month progressive physical exercise program. Ninety subjects with chronic low back pain participated in the study. The study design was controlled and it was carried out in three groups: intensive training, home exercise, and control group. Isometric and dynamic muscle strength of the trunk and lower limb were measured, at the beginning of the study and after the 3 months exercise program, and then during each of the follow-up sessions. The Oswestry Index and back pain intensity were also determined. Both exercise groups received benefit from the progressive exercise program. Their muscular performance improved and their back pain intensity decreased significantly. Among the home exercise group, the Oswestry Index also changed positively. The results demonstrate that the home exercise program could be as effective as the intensive training program in increasing muscle strength, as well as decreasing back pain and functional disability among low back pain patients with mild functional limitations.     

Effect of forward rapidly rotating shift work on circadian rhythms of arterial pressure, heart rate and oral temperature in air traffic controllers

Twenty-four-hour records of arterial pressure (AP), heart rate(HR), oral temperature (OT) and physical and mental performancewere obtained in air traffic controllers during morning (n=16),afternoon (n=17) and night (n=19) shifts. Data were analyzedby the cosinor method. The results obtained during the morningshift were as follows (mesor/amplitude/;acrophase): systolicAP (mm Hg)—113.6/10.0/16:03 h; diastolic AP—71.1/8.2—15:19h; mean AP—85.6/8.8/15:41 h; HR (beats/min)—77.5/8.9/16:00h; OT (dg C)—36.71/0.21/15:49 h; right-hand grip strength(kg)—49.8/2.0/17:43 h; left-hand grip strength—46.1/2.0/16.08h; mental performance (calculations/min)—14.9/1.1/16:39h. During the night shift either no change of the circadianacrophases (HR, right-hand grip strength) or acrophase delaysranging from about 2 h (systolic AP, OT, mental performance)up to 3 h (diastolic and mean AP, left-hand grip strength) wereobserved. Our data suggest that the shift system studied doesnot significantly alter the circadian rhythms, and does notinduce a desynchronization, particularly as concerns arterialpressure and oral temperature.     

Laser welded vascular anastomosis

Summary A comparative study was undertaken to investigate the application of a specially adapted microsurgical Neodymium Yag Laser system with a wavelength of 1,319 m and a CO₂ laser system for laser assisted microvascular end-to-end anastomosis (LAMA) of the rat femoral artery. Conventionally sutured anastomoses served as controls. Postoperative investigations included patency tests, light microscopy and tensile strength measurements. Both laser systems seem to be equally suitable for LAMA: The patency rates do not differ from those of sutured anstomoses and formation of microscopically small aneurysms occurred predominantly in control animals and only once in laser groups. The clamp time needed for LAMA was half the time that was needed for sutured anastomoses. Wound healing in all groups was similar with less fibrotic reactions and less foreign body granulomas in laser groups. At all intervals tensile strength was significantly higher for sutured anastomoses while differences between the CO₂- and the ND: Yag-laser groups were not statistically significant. Potential applications in urology include microvascular anastomoses in erectile dysfunction, pediatric and reconstructive urology.Contains parts of a dissertation     

Physical loading and performance as predictors of back pain in healthy adults A 5-year prospective study

We investigated muscle strength, aerobic power, and occupational and leisure-time physical loading as predictors of back pain in a 5-year follow-up study. A cohort of 456 adults aged 25, 35, 45 and 55 years, free of back pain, participated in measurements of anthropometric characteristics, aerobic power and muscle strength characteristics at baseline. The subjects' levels and types of physical activity and occupational physical loading were also determined. At 5 years after the baseline examinations 356 of these subjects (78.1 %) were reached by mail, and 262 of them (73.6%) properly completed and returned a questionnaire including a detailed back pain history for the 5 years following the baseline measurements. Of this number 56 subjects (21 %) who reported back pain ( > 30 on a scale from 0 to 100) and functional impairment during the 5-year follow-up composed the marked back pain group. Other subjects (n = 71, 27%) noting lesser symptoms were included in the mild back pain group; 135 subjects (52%) reported having had no back pain. The subjects with marked back pain were on average taller than the subjects without back pain, while no such difference was found in body mass. Heavy occupational musculoskeletal loading (P = 0.005) and high general occupational physical demands (P = 0.036) predicted future back pain. Leisuretime physical activity, aerobic power or muscle strength characteristics were not predictive of future back pain.