踇甲皮瓣联合腓动脉穿支皮瓣游离移植再造拇指并修复足部供区 15 例

目的总结应用踇甲皮瓣再造拇指及腓动脉穿支皮瓣游离移植修复足部供区的手术方法及临床效果。方法2016 年 6 月—2018 年 5 月，应用踇甲皮瓣联合腓动脉穿支皮瓣游离移植再造拇指并修复足部供区 15 例。男 10 例，女 5 例；年龄 21～48 岁，平均 34.6 岁。致伤原因：重物压砸伤 7 例，机器绞伤 5 例，电锯切割伤 3 例。Ⅰ度缺损 9 例，Ⅱ度缺损 6 例。入院至皮瓣手术时间 4～7 d，平均 5.2 d。结果术后踇甲皮瓣及腓动脉穿支皮瓣全部成活，切口均Ⅰ期愈合。患者均获随访，随访时间 8～24 个月，平均 16.4 个月。末次随访时，再造拇指指甲生长平整，有光泽，指腹饱满；足部皮瓣外形良好，颜色及质地接近受区。根据中华医学会手外科学会拇手指再造功能评定标准，获优 9 例、良 6 例；根据 Maryland 足功能评分标准，获优 10 例、良 5 例。患者行走步态正常，无跛行及疼痛不适。结论踇甲皮瓣修复拇指Ⅰ、Ⅱ度缺损，再造拇指可获得良好外观及功能；腓动脉穿支皮瓣具有血供可靠、血管恒定、易切取等优点，可有效修复足部供区。     

附加钢板技术治疗股骨干髓内钉术后骨不连的现状和研究进展

目的对附加钢板技术治疗股骨干髓内钉术后骨不连的历史、现状和进展进行综述。方法广泛查阅国内外关于附加钢板技术治疗股骨干髓内钉术后骨不连的临床研究文献，并进行综合分析。结果自 1997 年附加钢板技术已成功用于治疗股骨干髓内钉术后骨不连，根据原髓内钉是否失效，可分为保留原髓内钉和更换原髓内钉两类。该技术不仅适用于简单骨不连，还可用于合并严重畸形的复杂性骨不连。相比更换髓内钉、更换外侧钢板和双钢板技术，附加钢板技术手术创伤更小，骨折愈合时间更短，骨折愈合率更高，患者能更早重返社会和工作。然而，该技术也存在一些问题有待解决，包括双皮质螺钉固定困难、缺乏适合股骨干解剖型附加钢板以及缺乏术后功能和生活质量的评估研究。结论相比其他翻修固定方式，附加钢板技术能够获得更高的骨折愈合率和更好的临床预后。然而，术后患者能否在功能和生活质量方面进一步获益还有待证实。此外，还需要更高质量的临床对照研究深入证明其是否确实优于其他翻修固定方式。     

经重睑切口的上睑旋转皮瓣矫正轻中度内眦赘皮疗效观察

目的探讨重睑术中采用经重睑切口的上睑旋转皮瓣矫正轻、中度内眦赘皮的疗效。方法回顾分析 2016 年 7 月—2017 年 10 月，重睑术中采用经重睑切口的上睑旋转皮瓣矫正轻、中度睑板型内眦赘皮合并单睑的 34 例患者（试验组）临床资料；以同期 38 例接受传统“Z”成形内眦开大术联合重睑术患者为对照（对照组）。两组患者年龄及内侧赘皮分度比较，差异无统计学意义（P>0.05）。于术前及术后 6 d、6 个月测量眼裂长度，计算眼裂长度改善程度；参照内眦赘皮矫正标准评价手术疗效。 结果两组患者切口均Ⅰ期愈合，并获随访 6 个月。两组内眦赘皮明显矫正。试验组内眦处无切口；对照组遗留瘢痕，其中 6 例增生明显。术后 6 d 试验组及对照组眼裂长度改善程度分别为 3.63%±0.07%、3.70%±0.05%；术后 6 个月分别为 4.64%±0.09%、4.46%±0.10%；两组比较差异均无统计学意义（t=0.005，P=0.996；t=0.287，P=0.871）。术后 6 个月疗效评价，试验组优 20 例、良 12 例、差 2 例，优良率 94.12%；对照组优 16 例、良 16 例、差 6 例，优良率 84.21%；差异无统计学意义（χ²=0.796，P=0.372）。 结论经重睑切口的上睑旋转皮瓣矫正轻、中度内眦赘皮手术操作简便、效果满意，内眦处无瘢痕形成。     

DNA vaccine encoding the moonlighting protein Onchocerca volvulus glyceraldehyde-3-phosphate dehydrogenase (Ov-GAPDH) leads to partial protection in a mouse model of human filariasis

River blindness, caused by the filarial parasite Onchocerca volvulus, is a major socio-economic and public health problem in Sub-Saharan Africa. In January 2015, The Onchocerciasis Vaccine for Africa (TOVA) Initiative has been launched with the aim of providing new tools to complement mass drug administration (MDA) of ivermectin, thereby promoting elimination of onchocerciasis in Africa. In this context we here present Onchocerca volvulus glyceraldehyde-3-phosphate dehydrogenase (Ov-GAPDH) as a possible DNA vaccine candidate. We report that in a laboratory model for filariasis, immunization with Ov-GAPDH led to a significant reduction of adult worm load and microfilaraemia in BALB/c mice after challenge infection with the filarial parasite Litomosoides sigmodontis. Mice were either vaccinated with Ov-GAPDH.DNA plasmid (Ov-pGAPDH.DNA) alone or in combination with recombinantly expressed Ov-GAPDH protein (Ov-rGAPDH). During the following challenge infection of immunized and control mice with L. sigmodontis, those formulations which included the DNA plasmid, led to a significant reduction of adult worm loads (up to 57% median reduction) and microfilaraemia (up to 94% reduction) in immunized animals. In a further experiment, immunization with a mixture of four overlapping, synthetic Ov-GAPDH peptides (Ov-GAPDHpept), with alum as adjuvant, did not significantly reduce worm loads. Our results indicate that DNA vaccination with Ov-GAPDH has protective potential against filarial challenge infection in the mouse model. This suggests a transfer of the approach into the cattle Onchocerca ochengi model, where it is possible to investigate the effects of this vaccination in the context of a natural host–parasite relationship.     

Registro Multicêntrico de Takotsubo (REMUTA) – Aspectos Clínicos,Desfechos Intra-Hospitalares e Mortalidade a Longo Prazo

BackgroundTakotsubo syndrome (TTS) is an acquired form of cardiomyopathy. National Brazilian data on this condition are scarce. The Takotsubo Multicenter Registry (REMUTA) is the first to include multicenter data on this condition in Brazil.ObjectiveTo describe the clinical characteristics, prognosis, in-hospital treatment, in-hospital mortality, and mortality during 1 year of follow-up.MethodsThis is an observational, retrospective registry study including patients admitted to the hospital with diagnosis of TTS and patients admitted for other reasons who developed this condition. Evaluated outcomes included triggering factor, analysis of exams, use of medications, complications, in-hospital mortality, and mortality during 1 year of follow-up. A significance level of 5% was adopted.ResultsThe registry included 169 patients from 12 centers in the state of Rio de Janeiro, Brazil. Mean age was 70.9 ± 14.1 years, and 90.5% of patients were female; 63% of cases were primary TTS, and 37% were secondary. Troponin I was positive in 92.5% of patients, and median BNP was 395 (176.5; 1725). ST-segment elevation was present in 28% of patients. Median left ventricular ejection fraction was 40 (35; 48)%. We observed invasive mechanical ventilation in 25.7% of cases and shock in 17.4%. Mechanical circulatory support was used in 7.7%. In-hospital mortality was 10.6%, and mortality at 1 year of follow-up was 16.5%. Secondary TTS and cardiogenic shock were independent predictors of mortality.ConclusionThe results of the REMUTA show that TTS is not a benign pathology, as was once thought, especially regarding the secondary TTS group, which has a high rate of complications and mortality. (Arq Bras Cardiol. 2020; 115(2):207-216)     

Current status and challenges of Additive manufacturing in orthopaedics: An overview

Additive manufacturing is a rapidly emerging technology which is being successfully implemented in the various field of medicine as well as in orthopaedics, where it has applications in reducing cartilage defects and treatments of bones. The technology helps through systematic collection of information about the shape of the "defects" and precise fabrication of complex 3D constructs such as cartilage, heart valve, trachea, myocardial bone tissue and blood vessels. In this paper, a large number of the relevant research papers on the additive manufacturing and its application in medical specifically orthopaedics are identified through Scopus had been studied using Bibliometric analysis and application analysis is undertaken. The bibliometric analysis shows that there is an increasing trend in the research reports on additive manufacturing applications in the field of orthopaedics. Discussions are on using technological advancement like scanning techniques and various challenges of the orthopaedic being met by additive manufacturing technology. For patient-specific orthopaedic applications, these techniques incorporate clinical practice and use for effective planning. 3D printed models printed by this technology are accepted for orthopaedic surgery such as revision of lumbar discectomy, pelvic surgery and large scapular osteochondroma. The applications of additive manufacturing in orthopaedics will experience a rapid translation in future. An orthopaedic surgeon can convert need/idea into a reality by using computer-aided design (CAD) software, analysis software to facilitate the manufacturing. Thus, AM provides a comprehensive opportunity to manufacture orthopaedic implantable medical devices.     

Consensus on the use and monitoring of anti‐TNF‐α therapies for rheumatic diseases in Hong Kong 2005

The development and use of the tumour necrosis factor (TNF) antagonists is a major breakthrough in the treatment of many rheumatic diseases. Although these novel agents are undoubtedly superior to conventional therapeutic modalities, their costs and potential adverse effects are of concern. The current consensus statements were developed in early 2005 to help practicing rheumatologists identify which adult patients may benefit from anti‐TNF therapies and highlight their potential toxicities. The Hong Kong Society of Rheumatology has developed a registry on the use of the biologics in our local patients with chronic rheumatic disorders. Because the indications and novel data regarding the TNF inhibitors are ever changing, this consensus will be updated regularly.     

Continuously moving table 3D MRI with lateral frequency-encoding direction.

A method is presented for 3D MRI in an extended field of view (FOV) based on continuous motion of the patient table and an efficient acquisition scheme. A gradient-echo MR pulse sequence is applied with lateral (left-right (L/R)) frequency-encoding direction and slab selection along the direction of motion. Compensation for the table motion is achieved by a combination of slab tracking and data alignment in hybrid space. The method allows fast k-space coverage to be achieved, especially when a short sampling FOV is chosen along the direction of table motion, as is desirable for good image quality. The method can be incorporated into different acquisitions schemes, including segmented k-space scanning, which allows for contrast variation with the use of magnetization preparation. Head-to-toe images of volunteers were obtained with good quality using 3D spoiled gradient-echo sequences. As an example of magnetization-prepared imaging, fat/water separated images were acquired using chemical shift selective (CHESS) presaturation pulses.