Efficiency of work performance and contraction velocity in isotonic tetani of frog sartorius

Mechanical work, ATP, ADP, PC, free creatine and lactate concentrations were determined on IAA poisoned frog sartorii tetanically stimulated in humidified N, at 10°C in isotonic conditions (0.25 or 0.45 P₀). Tetanus duration was 0.35 s, number of tetani was varied from 0 (rest) to 25 (exhaustion). The mechanical work performed per mole ATP+PC split (W _P ^* ) amounted on the average to 16.7 kJ/mol. It was observed, however, that w _p ^* increased from about 13 to about 24 kJ/mol with decreasing ATP concentration from about 2 (resting value) to about 1 mol/g and that this decrease in ATP was associated with a decrease of the shortening (and relaxation) speed of the muscle to about 30% of the values observed on the first tetanus. It is concluded that the thermodynamic efficiency of muscle contraction, calculated from the ratio of w _P ^* (measured) to the thermodynamic affinity (free energy change) of ATP hydrolysis (estimated) increases from about 0.3 to about 0.5 with decreasing ATP concentration and shortening speed.This work was supported by the Fonds National Suisse de la Recherche Scientifique, Grants 3.332.78 and 3.364.0.82     

电化学共沉积制备有机高聚物/钙磷复合陶瓷膜层--Ⅱ XPS、SIMS表征及力学性能研究

通过电化学共沉积方法制备具有生物活性的有机高聚物／钙磷陶瓷复合膜层。用XPS、SIMS等对复合膜层的化学组分进行表征，证明少量有机高聚物可能在分子层次上掺杂形成有机高聚物／羟基磷灰石复合膜层。对电沉积HAP陶瓷膜层进行微刮痕实验表明，陶瓷膜层与金属基体的结合力得到显著改善。     

Mechanical Characterization of an In Vitro Device Designed to Quantitatively Injure Living Brain Tissue

Due to the nonlinear, viscoelastic material properties of brain, its mechanical response is dependent upon its total strain history. Therefore, a low strain rate, large strain will likely produce a tissue injury unique from that due to a high strain rate, moderate strain. Due to a lack of current understanding of specific in vivo physiological injury mechanisms, a priori assumptions cannot be made that a low strain rate injury induced by currently employed in vitro injury devices is representative of clinical, nonimpact, inertial head injuries. In the present study, an in vitro system capable of mechanically injuring cultured tissue at high strain rates was designed and characterized. The design of the device was based upon existing systems in which a clamped membrane, on which cells have been cultured, is deformed. However, the present system incorporates three substantial improvements: (1) noncontact measurement of the membrane deflection during injury; (2) precise and independent control over several characteristics of the deflection; and (3) generation of mechanical insults over a wide range of strains (up to 0.65) and strain rates (up to 15s^–1). Such a system will be valuable in the elucidation of the mechanisms of mechanical trauma and determination of injury tolerance criteria on a cellular level utilizing appropriate mechanical injury parameters.     

工程化肌腱修复肌腱缺损后力学特性的组织学基础

探讨组织工程化肌腱修复肌腱缺损后体内愈合过程中力学特性的组织学基础。取罗曼鸡肌腱细胞 ,经体外培养、扩增 ,与可降解生物材料聚羟基乙酸筛网构建工程化肌腱 ;将其植入修复 2 0只罗曼鸡第二趾深屈肌腱0 .5～ 0 .8cm缺损。术后第 2、4、6、8周取材 ,对标本进行大体、组织学及生物力学测定。植入 2、4、6、8周 ,新生肌腱在大体形态、细胞及胶原纤维排列方式上与正常肌腱相似 ,但新生肌腱的胶原纤维束并未形成较多的沿肌腱长度方向的致密结构 (“塑形”) ,导致其最大张力增加缓慢 ,到 8周时为 15 .4 0± 10 .6 3N,仅达正常肌腱的 2 3 ;8周时最大张应变为 2 2 .4 9± 10 .2 1 ,比正常肌腱大 10。结果表明 ,单纯聚羟基乙酸作支架 ,材料降解过快 ,新生肌腱失去了正常的力学刺激 ,“塑形”能力差 ,其生物力学强度低。提示 ,保持新生肌腱形成过程中正常的力学刺激对新生肌腱的“塑形”可能是至关重要的。     

Adaptation to destabilizing dynamics by means of muscle cocontraction

Adaptive control of wrist mechanics was investigated by means of destabilizing dynamics created by a torque motor. Subjects performed a 20 degrees movement to a 3 degrees target under the constraint that no motion should occur outside of the target zone once 800 ms had elapsed from movement onset. This constraint served as the minimum acceptable level of postural stability. The ability of subjects to modify their muscle activation patterns in order to successfully achieve this stability was investigated by creating three types of destabilizing dynamics with markedly different features: negative stiffness, negative damping, and square-wave vibration. Subjects performed sets of trials with the first type of destabilizing dynamics and were then required to adapt to the second and third. The adaptive response was quantified in terms of the rms electromyographic (EMG) activity recorded during various phases of the task. Surface EMG activity was recorded from three muscles contributing to wrist flexion and three muscles contributing to wrist extension. With negative stiffness, a significant compensatory increase in cocontraction of wrist flexor and extensor muscles was observed for slow movements, but there was little change in the muscle activity for rapid movements. With negative damping, muscle cocontraction was elevated to stabilize rapid movements, declining only gradually after the target was reached. For slow movements, cocontraction occurred only when negative damping was high. The response to square-wave vibration (10 Hz, +/-0.5 Nm), beginning at movement onset, was similar to that of negative damping, in that it resulted in elevated cocontraction. However, because the vibration persisted after the target was reached, there was no subsequent decrease in muscle activity. When the frequency was reduced to 5.5 Hz, but with the same torque impulse, cocontraction increased. This is consistent with greater mechanical instability. In summary, agonist-antagonist cocontraction was adapted to the stability of the task. This generally resulted in less of a change in muscle activity during the movement phase, when the task was performed quickly compared with slowly. On the other hand, the change in muscle activity during stabilization depended more on the nature of the instability than the movement speed.     

长骨内开口效应对其力学性能影响的理论模型研究

建立一个股骨中段的外侧皮质带有矩形开口的力学模型,采用有限元方法,计算骨开口区的尺寸改变时,股骨的扭转刚度和应力分布的变化。结果表明:骨开口长度为骨外径的1倍时(1OD),对股骨扭转刚度和剪应力分布的影响较小;开口长度从2OD增至4OD时扭转刚度急剧减小,而且剪应力的最大值位于开口区中心。本结论对临床骨科的手术治疗方法和骨开口尺寸的控制提供了重要的理论依据。     

Sustained Axial Loading Lengthens Arteries in Organ Culture

Although it has been recognized for many years that arteries in vivo exist under significant axial strain, studies of the adaptation of arteries to elevated axial strain have only recently been conducted. To determine the effects of sustained elevation of axial loading on arterial structure and function, axial stresses of 250 kPa or greater were applied to porcine common carotid arteries maintained in a perfusion organ culture system for 7 days at physiologic pressure and flow conditions. Our results demonstrated that axial stretch could lead to an increase in unloaded length that was proportional to the axial stretch ratio (stretched length divided by unloaded length) when the axial stretch ratio was above a threshold value of 2.14. Below this threshold, no significant length change occurred. Above this threshold, a significant increase in unloaded length (13 ± %,) and the number of smooth muscle cell nuclei (20 ± 7%) was observed. Permanent length change was associated with a significant decrease in axial stiffness, and the maximum elongation achieved was limited by rupture of the arterial wall. All tested arteries demonstrated good viability and strong vasomotor responses. These results show that arteries in organ culture can elongate under sustained axial loading.     

Determining appropriate models for joint control using surface electrical stimulation of soleus in spinal cord injury

The mechanical impedance of the ankle joint during electrical stimulation of the soleus is studied by applying constant-velocity 10° angular perturbations to the ankle and measuring the resultant torque. Both neurologically intact subjects and spinal cord injured subjects are tested. Lumped, piecewise linear models are developed to predict the torque from the measured displacement and acceleration signals. The commonly used second-order mass-spring-dashpot model fails to predict the changes in torque that occur following imposed movements. A fiveelement, directionally-dependent piecewise linear model is much better at predicting the measured responses for velocities up to 50° s⁻¹. Numerical least squared error indentification techniques are used to estimate the model parameters for three neurologically intact and three spinal cord injured subjects. The average error between the model’s response and the measured response across all subjects is 10·9%. There is some evidence that a velocity-dependent non-linear model could produce better results than the directionally-dependent piecewise linear model.     

A Dynamic Morphometric Model of the Normal Lung for Studying Expiratory Flow Limitation in Mechanical Ventilation

A nonlinear dynamic morphometric model of breathing mechanics during artificial ventilation is described. On the basis of the Weibel symmetrical representation of the tracheobronchial tree, the model accurately accounts for the geometrical and mechanical characteristics of the conductive zone and packs the respiratory zone into a viscoelastic Voigt body. The model also accounts for the main mechanisms limiting expiratory flow (wave speed limitation and viscous flow limitation), in order to reproduce satisfactorily, under dynamic conditions, the expiratory flow limitation phenomenon occurring in normal subjects when the difference between alveolar pressure and tracheal pressure (driving pressure) is high. Several expirations characterized by different levels of driving pressure are simulated and expiratory flow limitation is detected by plotting the isovolume pressure–flow curves. The model is used to study the time course of resistance and total cross-sectional area as well as the ratio of fluid velocity to wave speed (speed index), in conductive airway generations. The results highlight that the coupling between dissipative pressure losses and airway compliance leads to onset of expiratory flow limitation in normal lungs when driving pressure is increased significantly by applying a subatmospheric pressure to the outlet of the ventilator expiratory channel; wave speed limitation becomes predominant at still higher driving pressures.     

Does a torn anterior cruciate ligament lead to change in the central nervous drive of the knee extensors?

Summary Integrated surface electromyograms of the three superficial parts of the quadriceps and isokinetic knee extensor maximum torque and power production were recorded simultaneously and at different angular velocities in both legs in 11 male subjects with unilateral tear of the anterior cruciate ligament. The cross-sectional area (CSA) of the thigh and its muscular components were measured by computerized tomography. The principal findings were a small but significant decrease in quadriceps CSA on the affected side; a decreased active, but not passive, range of movement; decreased mechanical output, whether or not corrected for differences in CSA; and decreased electrornyographic activity — particularly in rectus femoris. These findings suggest that the reason for the decreased maximum and total knee extensor performance seen in these patients is a change in knee joint receptor afferent inflow.