中日友好医院分型股骨头坏死腓骨植入治疗的三维有限元分析

文题释义：股骨头坏死中日友好医院分型的有限元分析：根据李子荣等提出的中日友好医院分型，建立股骨头坏死三维模型，分为 M型(内侧型)、C型(中央型)和 L型(外侧型)，其中 L型包括L1型(次外侧型)、L2型(极外侧型)和 L3型(全头型)。通过对建立的模型进行有限元分析，为该分型的保髋治疗提供了一定力学依据，显示外侧柱的存留是精准预防塌陷的重要因素，为进一步实现个体化治疗提供力学基础。 腓骨支撑坏死股骨头保髋手术：是对于早中期股骨头坏死需要保留股骨头患者进行的一种手术方式。首先需对股骨头进行髓芯减压，清除一定坏死骨，空腔填塞松质骨(髂骨为主)，打压结实后植入腓骨(异体或自体)支撑，给坏死区的提供力学支撑及生物学修复，预防股骨头进一步坏死及塌陷。 背景：研究报道股骨头坏死的保髋疗效与外侧柱存留密切相关，中日友好医院分型是根据三柱结构确立的，对股骨头塌陷的预测准确性高。 目的：建立股骨头坏死中日友好医院分型各分型仿真的三维有限元模型，通过有限元分析各分型腓骨植入的力学变化，探讨外侧柱存留对保髋疗效的意义，为该分型的塌陷精准预测提供基础。 方法：建立正常股骨头、中日友好医院分型(M型、C型、L1型、L2型、L3型)股骨头坏死及其腓骨植入3组11种三维有限元模型，运用ANSYS软件进行有限元分析计算，观察各组模型的最大应力值、最大位移值及股骨头内部载荷传递模式。 结果与结论：①坏死组位移最大，应变最大，且因坏死分型不同而位移不同，位移变化如下：M型相似文献   

高渗盐水和甘露醇在动脉瘤性蛛网膜下腔出血患者降低颅内压中的应用

目的比较3%高渗盐水和20%甘露醇治疗重症动脉瘤性蛛网膜下腔出血所致颅内压增高的疗效.方法25例动脉瘤性蛛网膜下腔出血患者出现颅内压增高事件时, 随机交替接受等渗透剂量的160 mL 3%高渗盐水与150 mL 20%甘露醇进行降低颅内压治疗, 连续监测患者颅内压、平均动脉压、脑灌注压及中心静脉压.记录有效降低颅内压持续时间、颅内压最大降幅及其时间, 用药前及用药后1 h、3 h血钠水平及血浆渗透压.结果3%高渗盐水和20%甘露醇均可降低颅内压(均 P < 0.01), 两者的降低颅内压作用持续时间及颅内压降幅差异均无统计学意义(均 P >0.05).患者脑灌注压较用药前均上升(均 P < 0.01), 平均动脉压先上升后下降, 但差异无统计学意义( P >0.05).患者中心静脉压稍有波动, 但差异均无统计学意义(均 P >0.05).20%甘露醇治疗后患者血钠下降, 3%高渗盐水治疗后患者血钠值上升, 变化均有统计学意义(均 P < 0.05).20%甘露醇及3%高渗盐水治疗后患者血浆渗透压均先上升后下降, 变化均有统计学意义(均 P < 0.01). 结论3%高渗盐水可作为治疗动脉瘤性蛛网膜下腔出血所致颅内压增高患者的一线治疗药物.     

TGFβ promotes YAP‐dependent AXL induction in mesenchymal‐type lung cancer cells

The acquisition of chemoresistance remains a major cause of cancer mortality due to the limited accessibility of targeted or immune therapies. However, given that severe alterations of molecular features during epithelial‐to‐mesenchymal transition (EMT) lead to acquired chemoresistance, emerging studies have focused on identifying targetable drivers associated with acquired chemoresistance. Particularly, AXL, a key receptor tyrosine kinase that confers resistance against targets and chemotherapeutics, is highly expressed in mesenchymal cancer cells. However, the underlying mechanism of AXL induction in mesenchymal cancer cells is poorly understood. Our study revealed that the YAP signature, which was highly enriched in mesenchymal‐type lung cancer, was closely correlated to AXL expression in 181 lung cancer cell lines. Moreover, using isogenic lung cancer cell pairs, we also found that doxorubicin treatment induced YAP nuclear translocation in mesenchymal‐type lung cancer cells to induce AXL expression. Additionally, the concurrent activation of TGFβ signaling coordinated YAP‐dependent AXL expression through SMAD4. These data suggest that crosstalk between YAP and the TGFβ/SMAD axis upon treatment with chemotherapeutics might be a promising target to improve chemosensitivity in mesenchymal‐type lung cancer.

Abbreviations

AUC

area under the curve

AXL

AXL receptor tyrosine kinase

BCL2

B‐cell lymphoma 2

CTD2

cancer target discovery and development

CTGF

connective tissue growth factor

DEG

differentially expressed genes

DOXO

doxorubicin

EMT

epithelial–mesenchymal transition

Eto

etoposide

FDA

Food and Drug Administration

ITGB3

integrin beta‐3

MAPK

mitogen‐activated protein kinase

MMP2

matrix metalloproteinase‐2

MMP9

matrix metalloproteinase‐9

mRNA

messenger RNA

NF‐κB

nuclear factor kappa‐light‐chain‐enhancer of activated B cells

SBE

SMAD binding element

SERPINE1

serpin family E member 1

siRNA

small interfering RNA

ssGSEA

single‐sample gene set enrichment analysis

TCGA

The Cancer Genome Atlas

TGFβ

transforming growth factor beta

YAP

Yes‐associated protein

YAP8SA

mutants of inhibitory phosphorylation site at eight serine to Alanine of YAP

ZEB1

zinc finger E‐box binding homeobox 1

ZEB2

zinc finger E‐box‐binding homeobox 2

     

Customized three-dimensionally printed mandibular external fixator

The advent of customized three-dimensional (3D) printing allows the affordable manufacturing of sophisticated medical devices, thereby providing swift and simple solutions to specific needs in modern healthcare. Meanwhile, certain devices such as industrial mandibular external fixators (EFs) have become less and less available from medical device companies because of decreased indications. What is more, their handling is often complex. The authors report, step by step, the original design and uneventful clinical use of a 3D-printed, customized mandibular EF. This device was designed together with a positioning and drilling guide for the fixation of a septic mandibular pseudarthrosis. It provided an adequate and satisfactory balance between lightness and rigidity. A simple, accurate and safe placement of the EF was achieved thanks to the skin-supported positioner and drilling guide, thereby making the procedure minimally invasive and time-efficient. To our knowledge, this is the first reported clinical use of a 3D-printed, customized mandibular EF to date. Because such 3D technology is becoming increasingly available to a large number of surgeons, the authors believe that the present innovation could become an alternative to reusable standard EFs.     

孟鲁司特治疗呼吸道合胞病毒毛细支气管炎症状及反复喘息疗效研究

背景　呼吸道合胞病毒（RSV）毛细支气管炎易出现反复喘息，且下呼吸道分泌物中半胱氨酸白三烯（CysLTs）水平升高。而孟鲁司特是一种白三烯受体拮抗剂，关于其治疗RSV毛细支气管炎症状的研究相对较少。目的　探讨孟鲁司特改善婴幼儿RSV毛细支气管炎后症状及减轻反复喘息发作的有效性和安全性。方法　2015年6月-2017年6月连续纳入在潍坊市妇幼保健院出院的RSV毛细支气管炎患儿，随机分为治疗组、对照组。Ⅰ期，治疗组：口服孟鲁司特颗粒（4 mg）12周，1次/d；对照组：口服安慰剂12周，1次/d。对两组无症状天数、个人日记评分进行评估。随访9个月（Ⅱ期），观察Ⅰ+Ⅱ期反复喘息人数和医疗资源应用情况等。依据意向性分析（ITT）原则，应用全分析集（FAS）分析数据。结果　共纳入研究对象186例，治疗组92例，对照组94例。治疗组完成Ⅰ期研究的患儿为89例，对照组为90例；治疗组完成Ⅰ+Ⅱ期的患儿为84例，对照组为86例。治疗组平均依从性为97.8%（7 560/7 728），对照组平均依从性为97.4%（7 690/7 896），两组患儿平均依从性比较，差异无统计学意义（χ2=3.16，P=0.07）。在Ⅰ期研究期间，两组无症状天数、日间无症状天数、夜间无症状天数、个人日记评分比较，差异均无统计学意义（P>0.05）。在整个研究过程中（Ⅰ+Ⅱ期），治疗组RSV毛细支气管炎喘息复发人数少于对照组（P<0.05），治疗组喘息患儿出现2次及以上喘息比例低于对照组（χ2=5.14，P=0.02）。Ⅰ+Ⅱ期研究期间治疗组医疗资源应用人数、β-受体激动剂应用人数、糖皮质激素应用人数、住院人数低于对照组（P<0.05）。在事后亚组分析中，治疗组有湿疹史与父母哮喘史的患儿中无症状天数〔（49.7±20.2）、（51.3±20.9）d〕多于对照组〔（36.3±20.4）、（37.8±19.3）d〕（t=2.19，P=0.03；t=2.24，P=0.03）。整个研究过程中没有患儿因不良反应退出研究，两组间胃肠道紊乱、皮疹、转氨酶升高发生率比较，差异均无统计学意义（χ2=0.23，P=0.63；χ2=0.03，P=0.86；χ2=0.15，P=0.69）。结论　口服孟鲁司特（4 mg）12周不能改善RSV毛细支气管炎患儿呼吸道症状，但能降低患儿反复喘息发作次数。口服孟鲁司特（4 mg）有一定效果且安全。     

Standard versus customised locking plates for fixation of schatzker ii tibial plateau fractures

Aim3D-printed implants could improve the capture of fracture fragments for improved stability of tibial plateau fracture fixation. The aim of this study was to compare the biomechanical strength of fixation constructs using standard and customised 3D-printed proximal tibial locking plates for fixation of tibial plateau fractures.MethodsThis is a biomechanical study utilising six pairs of cadaveric tibiae. Fractures were created in an identical fashion using an osteotome and mallet, and fixed using either a standard, commercially-available proximal tibia locking plate or a customised 3D-printed plate. Design and production of the customised plates followed a “3D printing at point-of-care” model. Customised stainless steel 316 L plates were produced within a local additive manufacturing laboratory based upon pre-operative CT scans. Determination of implant choice within each cadaver pair was performed via simple randomisation. Following fracture fixation, the tibiae were skeletalised and biomechanically tested using a customised loading jig and a size-matched femoral knee prosthesis. The constructs were loaded cyclically from 100 N to approximately three times the cadaveric body-weight at 5 Hz for 10 000 cycles. Every 1000 cycles, the test was paused and the tibia was physically checked for failure. If failure had not occurred by the end of the testing cycle, the construct was loaded to failure and the load at which the construct failed was noted.ResultsFixation constructs using the 3D-printed plates performed comparably to those using the standard plates. There was no significant difference in the degree of fracture fragment displacement in both constructs. Overall longitudinal construct stiffness and load to failure was higher in the 3D-plates group but this did not reach statistical significance.ConclusionProduction of customised plates for proximal tibia fractures at point-of-care is feasible, however fixation constructs with these plates did not provide any biomechanical advantage over standard plates in terms of axial loading stiffness.     

Animal Models of Barrett's Esophagus and Esophageal Adenocarcinoma–Past,Present, and Future

Esophageal adenocarcinoma is the fastest rising cancer in the United States. It develops from long‐standing gastroesophageal reflux disease which affects >20% of the general population. It carries a very poor prognosis with 5‐year survival <20%. The disease is known to sequentially progress from reflux esophagitis to a metaplastic precursor, Barrett''s esophagus and then onto dysplasia and esophageal adenocarcinoma. However, only few patients with reflux develop Barrett''s esophagus and only a minority of these turn malignant. The reason for this heterogeneity in clinical progression is unknown. To improve patient management, molecular changes which facilitate disease progression must be identified. Animal models can provide a comprehensive functional and anatomic platform for such a study. Rats and mice have been the most widely studied but disease homology with humans has been questioned. No animal model naturally simulates the inflammation to adenocarcinoma progression as in humans, with all models requiring surgical bypass or destruction of existing antireflux mechanisms. Valuable properties of individual models could be utilized to holistically evaluate disease progression. In this review paper, we critically examined the current animal models of Barrett''s esophagus, their differences and homologies with human disease and how they have shaped our current understanding of Barrett''s carcinogenesis.     

PD-L1高表达晚期非小细胞肺癌患者单纯免疫治疗与免疫联合化疗疗效比较

背景与目的以免疫检查点抑制剂（immune checkpoint inhibitors, ICIs）为代表的免疫治疗越来越广泛地应用于肺癌治疗。然而，对于程序性死亡受体配体1（programmed cell death-ligand 1, PD-L1）高表达，即肿瘤比例评分（tumor proportion score, TPS）≥50%的晚期非小细胞肺癌（non-small cell lung cancer, NSCLC）患者，采用单纯免疫治疗还是免疫联合化疗在临床上仍存争议。本研究旨在评估PD-L1高表达的晚期NSCLC患者接受单纯免疫治疗与免疫联合化疗的疗效。方法本研究回顾性分析了49例PD-L1高表达晚期NSCLC患者的临床资料。PD-L1表达采用22C3抗体行免疫组化染色，按TPS判读PD-L1表达水平。比较不同临床特征分组患者的客观缓解率（objective response rate，ORR）和无进展生存时间（progression free survival, PFS）。结果免疫单药与免疫联合化疗组的ORR分别为47.1%（8/17）和43.8%（14/32），差异无统计学意义（P=0.825）。免疫单药与免疫联合化疗组的中位PFS分别为8.0个月和6.8个月，差异无统计学意义（P=0.502）。并对本组PD-L1高表达患者免疫治疗的预测因素进行了分析，结果显示，一线免疫治疗ORR（12/19, 63.2%）显著优于二线及以上免疫治疗（10/30, 33.3%），差异有统计学意义（P=0.041），二者间PFS无差异。年龄、性别、吸烟史、功能状态评分（performance status, PS）、病理类型、肿瘤大小、肿瘤淋巴结转移（tumor node metastasis, TNM）分期与ORR和PFS不相关。结论PD-L1高表达的晚期NSCLC患者接受免疫单药和免疫联合化疗的疗效相近。PD-L1高表达患者一线免疫治疗的ORR更佳。对此类人群的最佳治疗方案有待于前瞻性临床研究进一步探索。