单侧外固定治疗重度Pilon骨折的临床疗效探究

目的探讨单侧外固定治疗重度Pilon骨折的临床疗效。方法回顾性分析2017年6月-2018年12月南京中大医院江北院区骨科收治的重度Pilon骨折患者100例,男性54例,女性46例;年龄18~65岁,平均35.5岁;Ruedi-AllgowerⅡ型39例,Ⅲ型61例。按照不同固定方法分为常规固定组和单侧外固定组,各50例,比较两组患者住院时间、完全负重下地时间、骨折愈合时间,评价治疗前及治疗后3个月踝关节活动度、踝关节功能恢复情况、疼痛程度,并统计患者的治疗效果及并发症发生情况。结果单侧外固定组住院时间、完全负重下地时间、骨折愈合时间分别为(16.50±1.50)d、(132.56±10.25)d、(14.16±0.69)周,均短于常规固定组(19.25±2.35)d、(198.65±16.58)d、(17.58±1.50)周(t/P=6.975/0.001、23.970/0.001、14.650/0.001)。治疗后3个月,单侧外固定组踝关节Mazur评分为(85.67±6.59)分,显著高于常规固定组(62.78±3.45)分,VAS评分为(2.23±0.36)分,低于常规固定组(4.59±0.89)分(t/P=21.760/0.001、17.380/0.001);单侧外固定组患者踝关节活动度分别为(17.29±0.16)°、(28.36±1.23)°、(19.68±0.16)°、(16.89±2.12)°,均高于常规固定组(10.62±1.25)°、(21.57±2.58)°、(14.36±1.62)°、(14.25±0.57)°(t/P=37.430/0.001、16.800/0.001、23.110/0.001、8.503/0.001)。单侧外固定组治疗优良率为90.00%,显著高于常规固定组74.00%(χ^2/P=4.336/0.037)。单侧外固定组总并发症发生率为4.00%,显著低于常规固定组的18.00%(χ^2/P=5.005/0.025)。结论单侧外固定支架治疗重度Pilon骨折可有效减轻患者疼痛症状,提高患者踝关节活动度,恢复患者功能,治疗效果显著,安全性较高。     

Morphological imaging and CT histogram analysis to differentiate pancreatic neuroendocrine tumor grade 3 from neuroendocrine carcinoma

PurposeTo compare morphological imaging features and CT texture histogram parameters between grade 3 pancreatic neuroendocrine tumors (G3-NET) and neuroendocrine carcinomas (NEC).Materials and methodsPatients with pathologically proven G3-NET and NEC, according to the 2017 World Health Organization classification who had CT and MRI examinations between 2006-2017 were retrospectively included. CT and MRI examinations were reviewed by two radiologists in consensus and analyzed with respect to tumor size, enhancement patterns, hemorrhagic content, liver metastases and lymphadenopathies. Texture histogram analysis of tumors was performed on arterial and portal phase CT images. images. Morphological imaging features and CT texture histogram parameters of G3-NETs and NECs were compared.ResultsThirty-seven patients (21 men, 16 women; mean age, 56 ± 13 [SD] years [range: 28-82 years]) with 37 tumors (mean diameter, 60 ± 46 [SD] mm) were included (CT available for all, MRI for 16/37, 43%). Twenty-three patients (23/37; 62%) had NEC and 14 patients (14/37; 38%) had G3-NET. NECs were larger than G3-NETs (mean, 70 ± 51 [SD] mm [range: 18 - 196 mm] vs. 42 ± 24 [SD] mm [range: 8 - 94 mm], respectively; P = 0.039), with more tumor necrosis (75% vs. 33%, respectively; P = 0.030) and lower attenuation on precontrast (30 ± 4 [SD] HU [range: 25-39 HU] vs. 37 ± 6 [SD] [range: 25-45 HU], respectively; P = 0.002) and on portal venous phase CT images (75 ± 18 [SD] HU [range: 43 - 108 HU] vs. 92 ± 19 [SD] HU [range: 46 - 117 HU], respectively; P = 0.014). Hemorrhagic content on MRI was only observed in NEC (P = 0.007). The mean ADC value was lower in NEC ([1.1 ± 0.1 (SD)] × 10⁻³ mm²/s [range: (0.91 - 1.3) × 10⁻³ mm²/s] vs. [1.4 ± 0.2 (SD)] × 10⁻³ mm²/s [range: (1.1 - 1.6) × 10⁻³ mm²/s]; P = 0.005). CT histogram analysis showed that NEC were more heterogeneous on portal venous phase images (Entropy-0: 4.7 ± 0.2 [SD] [range: 4.2-5.1] vs. 4.5 ± 0.4 [SD] [range: 3.7-4.9]; P = 0.023).ConclusionPancreatic NECs are larger, more frequently hypoattenuating and more heterogeneous with hemorrhagic content than G3-NET on CT and MRI.     

Differentiating autoimmune pancreatitis from pancreatic ductal adenocarcinoma with CT radiomics features

PurposeThe purpose of this study was to determine whether computed tomography (CT)-based machine learning of radiomics features could help distinguish autoimmune pancreatitis (AIP) from pancreatic ductal adenocarcinoma (PDAC).Materials and MethodsEighty-nine patients with AIP (65 men, 24 women; mean age, 59.7 ± 13.9 [SD] years; range: 21–83 years) and 93 patients with PDAC (68 men, 25 women; mean age, 60.1 ± 12.3 [SD] years; range: 36–86 years) were retrospectively included. All patients had dedicated dual-phase pancreatic protocol CT between 2004 and 2018. Thin-slice images (0.75/0.5 mm thickness/increment) were compared with thick-slices images (3 or 5 mm thickness/increment). Pancreatic regions involved by PDAC or AIP (areas of enlargement, altered enhancement, effacement of pancreatic duct) as well as uninvolved parenchyma were segmented as three-dimensional volumes. Four hundred and thirty-one radiomics features were extracted and a random forest was used to distinguish AIP from PDAC. CT data of 60 AIP and 60 PDAC patients were used for training and those of 29 AIP and 33 PDAC independent patients were used for testing.ResultsThe pancreas was diffusely involved in 37 (37/89; 41.6%) patients with AIP and not diffusely in 52 (52/89; 58.4%) patients. Using machine learning, 95.2% (59/62; 95% confidence interval [CI]: 89.8–100%), 83.9% (52:67; 95% CI: 74.7–93.0%) and 77.4% (48/62; 95% CI: 67.0–87.8%) of the 62 test patients were correctly classified as either having PDAC or AIP with thin-slice venous phase, thin-slice arterial phase, and thick-slice venous phase CT, respectively. Three of the 29 patients with AIP (3/29; 10.3%) were incorrectly classified as having PDAC but all 33 patients with PDAC (33/33; 100%) were correctly classified with thin-slice venous phase with 89.7% sensitivity (26/29; 95% CI: 78.6–100%) and 100% specificity (33/33; 95% CI: 93–100%) for the diagnosis of AIP, 95.2% accuracy (59/62; 95% CI: 89.8–100%) and area under the curve of 0.975 (95% CI: 0.936–1.0).ConclusionsRadiomic features help differentiate AIP from PDAC with an overall accuracy of 95.2%.     

中日友好医院分型股骨头坏死腓骨植入治疗的三维有限元分析

文题释义：股骨头坏死中日友好医院分型的有限元分析：根据李子荣等提出的中日友好医院分型，建立股骨头坏死三维模型，分为 M型(内侧型)、C型(中央型)和 L型(外侧型)，其中 L型包括L1型(次外侧型)、L2型(极外侧型)和 L3型(全头型)。通过对建立的模型进行有限元分析，为该分型的保髋治疗提供了一定力学依据，显示外侧柱的存留是精准预防塌陷的重要因素，为进一步实现个体化治疗提供力学基础。 腓骨支撑坏死股骨头保髋手术：是对于早中期股骨头坏死需要保留股骨头患者进行的一种手术方式。首先需对股骨头进行髓芯减压，清除一定坏死骨，空腔填塞松质骨(髂骨为主)，打压结实后植入腓骨(异体或自体)支撑，给坏死区的提供力学支撑及生物学修复，预防股骨头进一步坏死及塌陷。 背景：研究报道股骨头坏死的保髋疗效与外侧柱存留密切相关，中日友好医院分型是根据三柱结构确立的，对股骨头塌陷的预测准确性高。 目的：建立股骨头坏死中日友好医院分型各分型仿真的三维有限元模型，通过有限元分析各分型腓骨植入的力学变化，探讨外侧柱存留对保髋疗效的意义，为该分型的塌陷精准预测提供基础。 方法：建立正常股骨头、中日友好医院分型(M型、C型、L1型、L2型、L3型)股骨头坏死及其腓骨植入3组11种三维有限元模型，运用ANSYS软件进行有限元分析计算，观察各组模型的最大应力值、最大位移值及股骨头内部载荷传递模式。 结果与结论：①坏死组位移最大，应变最大，且因坏死分型不同而位移不同，位移变化如下：M型相似文献   

解剖锁定钢板联合同种异体腓骨治疗肱骨近端骨折疗效的Meta分析

文题释义：肱骨近端骨折：肱骨近端包括肱骨头及大结节、小结节，中老年人骨质疏松及低能量损伤可导致肱骨近端骨折。 同种异体腓骨：取自于人体异体，经过加工处理，去除其免疫原性，保留其骨性结构，可用于移植修复骨缺损，起到支撑作用。 背景：肱骨近端骨折是临床常见骨折，但对肱骨近端内侧柱缺乏支撑的骨折目前仍是治疗难点，并发症常见，失败率较高。 目的：比较解剖锁定钢板联合同种异体腓骨与单纯解剖锁定钢板治疗肱骨近端骨折的疗效。 方法：使用计算机检索PubMed、Embase、Cochrane Library、Google Scholar、中国知网、万方、维普数据库，检索时间均从建库到2020年2月。检索国内外关于对比研究解剖锁定钢板联合同种异体腓骨与单纯解剖锁定钢板治疗肱骨近端骨折疗效的文献。2名研究员根据纳入和排除标准分别独立筛选文献，提取数据，评估文献中的偏倚风险。纳入12篇相关文献使用RevMan 5.2软件将以下指标进行Meta分析，包括影像学数据、功能评分和并发症。结果与结论：①通过文献检索、根据纳入和排除标准，12篇文献纳入研究，其中11篇为回顾性队列研究，1篇为随机对照研究；纳入研究文献质量高，但GRADE证据质量级别较低。②共纳入958例患者，其中解剖锁定钢板联合同种异体腓骨组411例，单纯解剖锁定钢板组547例；③Meta分析结果显示，解剖锁定钢板联合同种异体腓骨组术后1年肱骨头高度差值(MD=-2.40，95%CI：-2.49至-2.31)、颈干角差值(MD= -6.14，95%CI：-6.62至-5.67)、目测类比评分(MD=-0.22，95%CI：-0.35至-0.08)、肩关节功能评分(MD=4.12，95%CI：2.18-6.06)，上肢伤残评分(MD=-10.32，95%CI：-13.44至-7.19)、术后2年的目测类比评分(MD=-0.37，95%CI：-0.55至-0.19)、肩关节功能评分(MD=5.07，95%CI：2.86-7.27)、总体并发症(OR=0.31，95%CI：0.20-0.48)及肱骨头螺钉切出(OR=0.25，95%CI：0.11-0.55)均明显优于单纯解剖锁定钢板组(P < 0.05)，肱骨头坏死(OR=0.94，95%CI：0.47-1.88)，两组间差异无显著性意义(P > 0.05)；④因此，较弱的证据提示，肱骨近端解剖锁定钢板联合同种异体腓骨治疗肱骨近端骨折的短期疗效优于解剖锁定钢板，可减少并发症的发生，促进功能恢复。ORCID: 0000-0002-8486-3932(阳运康) 中国组织工程研究杂志出版内容重点：人工关节；骨植入物；脊柱；骨折；内固定；数字化骨科；组织工程     

Customized three-dimensionally printed mandibular external fixator

The advent of customized three-dimensional (3D) printing allows the affordable manufacturing of sophisticated medical devices, thereby providing swift and simple solutions to specific needs in modern healthcare. Meanwhile, certain devices such as industrial mandibular external fixators (EFs) have become less and less available from medical device companies because of decreased indications. What is more, their handling is often complex. The authors report, step by step, the original design and uneventful clinical use of a 3D-printed, customized mandibular EF. This device was designed together with a positioning and drilling guide for the fixation of a septic mandibular pseudarthrosis. It provided an adequate and satisfactory balance between lightness and rigidity. A simple, accurate and safe placement of the EF was achieved thanks to the skin-supported positioner and drilling guide, thereby making the procedure minimally invasive and time-efficient. To our knowledge, this is the first reported clinical use of a 3D-printed, customized mandibular EF to date. Because such 3D technology is becoming increasingly available to a large number of surgeons, the authors believe that the present innovation could become an alternative to reusable standard EFs.     

骨盆骨折大出血救治技术与流程

由于骨盆的特殊结构,其内侧的血管网损伤导致不可压迫性出血。即使创伤中心和救治体系的建设,以及损害控制技术等发展,病死率仍然高达30%~60%。损害控制性复苏、骨盆带、外固定支架、复苏性腹主动脉内球囊阻断(REBOA)、动脉栓塞和腹膜外填塞等技术不断发展,部分已经得到普及,但迄今仍没有公认的确定性止血流程。我国正在普遍建设创伤中心,亟待制订适合我国的骨盆骨折大出血患者的救治流程,以提高救治成功率。本文阐述控制骨盆骨折大出血的外科技术和流程进展供同道参考。     

后外侧结构重建在新鲜股骨颈骨折人工股骨头置换术中的应用

目的探讨后外侧结构重建对后外侧入路人工股骨头置换术术后早期关节脱位的影响。方法选取2016年9月至2017年8月于我院行后外侧入路初次人工股骨头置换术的股骨颈骨折患者60例,根据术中是否修补关节囊及外旋肌群分为重建组(33例:舌形切开关节囊,术中将关节囊及外旋肌群原位缝合在大转子后方及臀中肌肌腱附着处)和对照组(27例:切除关节囊后,术中未进行外旋肌群修复重建)。比较两组的手术情况及术后近期关节功能情况。结果重建组的手术时间为(45.0±15.3) min,长于对照组的(35.0±12.4) min (P <0.05)。重建组术腔引流量为(200.0±80.0) m L,少于对照组的(420.0±120.6) m L (P <0.05)。重建组的早期脱位率为0.000%(0例),与对照组的7.407%(2例)比较无统计学差异(P>0.05)。重建组术后Harris评分为(92.0±3.4)分,高于对照组的(88.2±5.0)分(P <0.05)。结论在后外侧入路人工股骨头置换过程中行后外侧结构重建能够有效减少术腔引流量,提高髋关节Harris评分,对维持髋关节软组织平衡具有重要意义。     

Standard versus customised locking plates for fixation of schatzker ii tibial plateau fractures

Aim3D-printed implants could improve the capture of fracture fragments for improved stability of tibial plateau fracture fixation. The aim of this study was to compare the biomechanical strength of fixation constructs using standard and customised 3D-printed proximal tibial locking plates for fixation of tibial plateau fractures.MethodsThis is a biomechanical study utilising six pairs of cadaveric tibiae. Fractures were created in an identical fashion using an osteotome and mallet, and fixed using either a standard, commercially-available proximal tibia locking plate or a customised 3D-printed plate. Design and production of the customised plates followed a “3D printing at point-of-care” model. Customised stainless steel 316 L plates were produced within a local additive manufacturing laboratory based upon pre-operative CT scans. Determination of implant choice within each cadaver pair was performed via simple randomisation. Following fracture fixation, the tibiae were skeletalised and biomechanically tested using a customised loading jig and a size-matched femoral knee prosthesis. The constructs were loaded cyclically from 100 N to approximately three times the cadaveric body-weight at 5 Hz for 10 000 cycles. Every 1000 cycles, the test was paused and the tibia was physically checked for failure. If failure had not occurred by the end of the testing cycle, the construct was loaded to failure and the load at which the construct failed was noted.ResultsFixation constructs using the 3D-printed plates performed comparably to those using the standard plates. There was no significant difference in the degree of fracture fragment displacement in both constructs. Overall longitudinal construct stiffness and load to failure was higher in the 3D-plates group but this did not reach statistical significance.ConclusionProduction of customised plates for proximal tibia fractures at point-of-care is feasible, however fixation constructs with these plates did not provide any biomechanical advantage over standard plates in terms of axial loading stiffness.