Relations between chronic stimulation-induced changes in contractile properties and the Ca2+-sequestering system of rat and rabbit fast-twitch muscles

This study compares changes in contractile properties, Parvalbumin content, and Ca²⁺-uptake by the sarcoplasmic reticulum (SR) of low-frequency stimulated rat and rabbit tibialis anterior (TA) muscles. Time to peak tension increased 1.8-fold in 35-day stimulated rabbit TA, while no change occurred in rat TA. Isometric twitch tension increased 2-fold in rabbit TA, but was unaltered in rat TA. Parvalbumin (PA) content was more than 90% reduced in rabbit TA, but only 60% in rat TA after 35 days. At this time, PA content of the stimulated rat TA was still higher than that of normal rabbit TA. Taking into account the suggested role of PA as a cytosolic Ca²⁺ buffer, its decrease could lead to an impaired free Ca²⁺-decay with a prolonged active state and a higher tension output during a single twitch. This would explain why chronic stimulation led to an increase in isometric twitch tension in rabbit TA, but not in rat TA. The 1.6-fold rise in half-relaxation time of 35-day stimulated rat and rabbit TA most likely resulted from a 50% reduced Ca²⁺-uptake by the SR, due to a still unknown modification of the Ca²⁺-transport ATPase.     

Comparison of frequency, intensity, and duration of aggressive responses in rats

Three judges were trained to evaluate the frequency, intensity, and duration of aggressive responses in rats. Intrajudge and interjudge reliability ranged from .84 to .99. Correlation coefficients between frequency, intensity, and duration of aggressive responses ranged from .89 to .99. All three measures were found to be highly reliable methods of measuring aggression.     

内骨架一体化小腿假肢的生物力学研究

一体化假肢是以聚合物为材料从接受腔到假腿一体成型的新型下肢假肢，它比传统型假肢更经济、美观、轻便，具有较大的应用前景。目前的相关研究主要集中在设计与制作及少量的临床研究方面。由于一体化假肢与传统型假肢在结构上的差异，有必要对其进行应力分析。本研究的目的是开展内骨架一体化假肢的生物力学研究，本研究基于内骨架一体化小腿假肢的真实几何构型，建立三维有限元模型，计算该模型在模拟Heel OH步态时相的载荷作用下的应力分布；在保持该模型的几何形状不变的情况下，建立了三个不同壁面厚度的一体化小腿假肢的有限元模型，分析壁面厚度对一体化小腿假肢应力分布的影响；通过分别赋予模型四种不同高分子聚合物的材料力学特性值，分析不同材料的一体化假肢的应力分布特点；分别对模型施加与正常步态的五个典型时相对应的载荷，分析一体化小腿假肢在各步态时相的应力分布特点。本研究结果对一体化假肢设计有指导价值。     

Compartmental Analysis of Breathing in the Supine and Prone Positions by Optoelectronic Plethysmography

Optoelectronic plethysmography (OEP) has been shown to be a reliable method for the analysis of chest wall kinematics partitioned into pulmonary rib cage, abdominal rib cage, abdomen, and right and left side in the seated and erect positions. In this paper, we extended the applicability of this method to the supine and prone positions, typically adopted in critically ill patients. For this purpose we have first developed proper geometrical and mathematical models of the chest wall which are able to provide consistent and reliable estimations of total and compartmental volume variations in these positions suitable for clinical settings. Then we compared chest wall (CW) volume changes computed from OEP( V _CW) with lung volume changes measured with a water seal spirometer (SP) ( V _SP)in 10 normal subjects during quiet (QB) and deep (DB) breathing on rigid and soft supports. We found that on a rigid support the average differences between V _SP and V _CW were –4.2% ± 6.2%, –3.0% ± 6.1%, –1.7% ±7.0%, and –4.5% ± 9.8%, respectively, during supine/QB, supine/DB, prone/QB, and prone/DB. On the soft surface we obtained –0.1% ± 6.0%, –1.8% ± 7.8%, 18.0% ± 11.7%, and 10.2% ± 9.6%, respectively. On rigid support and QB, the abdominal compartment contributed most of the V _CW in the supine (63.1% ± 11.4%) and prone (53.5% ± 13.1%) positions. V _CW was equally distributed between right and left sides. In the prone position we found a different chest wall volume distribution between pulmonary and abdominal rib cage (22.1% ± 8.6% and 24.4% ± 6.8, respectively) compared with the supine position (23.3% ± 9.3% and 13.6% ± 3.0%). © 2001 Biomedical Engineering Society. PAC01: 8763Lk, 8719Uv     

The Reliability of Arousal Threshold During Sleep

Thirty-five subjects from two independent studies were awakened at EEG-defined periods during the night with 1000 Hz ascending tone series. Awakenings were made five to eight times per night during stage 2, stage 4, or REM sleep over a series of nights in good and poor sleepers. Reliability was assessed within stage, within night, between stages, and between nights. Good and poor sleepers did not differ in either depth of sleep or reliability of arousal threshold and were thus pooled in the analyses. From night to night, the most consistency was seen in stage 4 (r=.74), although REM reliability (r?₁= .49) and stage 2 reliability (r?₁= .50 and r?₁= .69 in the two respective studies) estimates were also greater than zero. Early sleep onset and morning arousals were more variable. Reliability estimates on arousal thresholds taken within the same night for stage 2 were r= .64 and r?₁= .77 for the two studies and r= .96 for REM. The depth of sleep was not correlated with awake auditory threshold. It was concluded that five or six carefully placed arousals could give a good estimate of an individual's usual arousal threshold.     

Flexible versus rigid endoscopes for outpatient hysteroscopy: a prospective randomized clinical trial

To evaluate patient acceptance, optical properties and the clinical feasibility of flexible compared with rigid hysteroscopes, 142 patients undergoing outpatient hysteroscopy were included in a prospective, randomized clinical trial. The flexible hysteroscope was used in 70 patients, and the rigid instrument in 72. At different stages of the hysteroscopy the level of pain experienced by the women was assessed using a 10 cm visual analogue scale. Optical properties characterized by the parameters intrauterine visibility, hysteroscopic view and diagnostic accuracy were ranked by the surgeons using a 5-point scale (1 = excellent to 5 = insufficient), and duration of the hysteroscopy was measured. Hysteroscopy was successful in 87.5 and 100% of patients in the flexible and rigid groups respectively. With the use of rigid telescopes, discomfort at introduction and during the hysteroscopy was significantly greater (median 1.7 versus 0.7, P = 0.003; 3.1 versus 1.2, P < 0.001 respectively), but optical properties were judged to be far superior (P < 0.001 for all three comparisons) and procedure time was significantly shorter (median 70 versus 120 s, P = 0.003). In conclusion, outpatient hysteroscopy seems to be less painful when using flexible telescopes. However, rigid hysteroscopes provide superior optical qualities and permit a more rapid performance with higher success rates at much lower cost.     

兔眼虹膜组织力学特性的实验研究

利用我们创建的将兔眼蝉孔水密缝合后，模拟眼内前后房压强差，对虹膜整体进行加压的实验方法，对兔眼虹膜的力学特性进行了实验研究。结果表明：兔眼虹膜是典型的粘弹性物质；面积模量与前后方压强差之间基本成线性关系。实验结果可为青光眼致盲机制解释和瞳孔阻滞力的估算提供参考。     

人脊柱腰椎松质骨归一化应力松弛蠕变函数

目的研究正常国人新鲜尸体腰椎L5椎体松质骨的粘弹性力学性质,为临床提供生物力学参数。方法在ShimadzuAUTOGRAPH电子万能试验机上对L5椎体松质骨试样进行压缩应力松弛、蠕变实验。结果得到了L5椎体应力松弛、蠕变数据和曲线,还得出了归一化应力松弛、归一化蠕变函数及曲线取得了回归系数a、b、c、d值。结论L5椎体7200s应力松弛量为0.261MPa、7200s蠕变量为0.217%。     

Diblock Copolymers Based on 1,4‐Dioxan‐2‐one and ε‐Caprolactone: Characterization and Thermal Properties

Summary: Various poly(ε‐caprolactone‐block‐1,4‐dioxan‐2‐one) (P(CL‐block‐PDX)) block copolymers were prepared according to the living/controlled ring‐opening polymerization (ROP) of 1,4‐dioxan‐2‐one (PDX) as initiated by in situ generated ω‐aluminium alkoxides poly(ε‐caprolactone) (PCL) chains in toluene at 25 °C. 1 ¹H NMR, PCS and TEM measurements have attested for the formation of colloids attributed to a growing PPDX core surrounded by a solvating PCL shell during the polymerization of PDX promoted by ω‐Al alkoxide PCL chains in toluene. The thermal behavior of the P(CL‐block‐PDX) copolymers was studied by DSC; showing two distinct melting temperatures (as well as two glass transition temperatures) similar to those of the respective homopolyesters. Finally, the thermal degradation of the P(CL‐block‐PDX) block copolymers was investigated by TGA simultaneously coupled to a FT‐IR spectrometer and a mass spectrometer for evolved gas analysis (EGA). The degradation occurred in two consecutive steps involving a first unzipping depolymerization of the PPDX blocks followed by the degradation of the PCL blocks via both ester pyrolysis and unzipping reactions.

TEM observation of P(CL‐block‐PDX) block copolyesters ( = 11 600 and = 22 100) as formed by vaporization starting from a diluted suspension in toluene/TCE mixture solvent (50/50 v/v).     

Reversible Photo‐Mechanical Switching Behavior of Azobenzene‐Containing Semi‐Interpenetrating Network under UV and Visible Light Irradiation

Summary: Light‐induced reversible changes in elasticity of semi‐interpenetrating network (semi‐IPN) films bearing azobenzene moieties were achieved under both ultraviolet (UV) and visible light irradiation. The semi‐IPN film was prepared by a cationic copolymerization of azobenzene‐containing vinyl ethers in a linear polycarbonate (PC) film as a matrix. When the irradiation was switched on and off, the semi‐IPN film showed rapid reversible deformation with the same behavior occurring over a range of wavelengths, including both the UV and visible regions. The observed reversible deformation of the film was attributed to the decrease in the film's elasticity, which was assumed to be caused by the frequent trans‐cis cycling isomerization of azobenzene moieties taking place during the UV and visible light irradiation. This cycling makes it difficult for the azobenzene groups to aggregate, thus hindering their ability to function as pseudo‐crosslinking points.